> &mdio0 {
> interrupt-parent = <&gpio1>;
> interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
>
> switch0: switch0@2 {
> compatible = "marvell,mv88e6190";
> reg = <2>;
> pinctrl-0 = <&pinctrl_gpios>;
> reset-gpios = <&gpio4 16 GPIO_ACTIVE_LOW>;
> dsa,member = <0 0>;
This is wrong. The interrupt is a switch property, not an MDIO bus
property. So it belongs inside the switch node.
Andrew
