Mark Brown wrote:
Aculab E1/T1 PMXc cPCI carrier card cards present a natsemi on the cPCI
bus with an oversized EEPROM using a direct MII<->MII connection with no
PHY. This patch adds a new device table entry supporting these cards.
Signed-Off-By: Mark Brown <[EMAIL PROTECTED]>
@@ -811,7 +816,11 @@
np->hands_off = 0;
np->intr_status = 0;
np->eeprom_size = natsemi_pci_info[chip_idx].eeprom_size;
- np->ignore_phy = 0;
+ if (natsemi_pci_info[chip_idx].flags & NATSEMI_FLAG_IGNORE_PHY) {
+ np->ignore_phy = 1;
+ } else {
+ np->ignore_phy = 0;
+ }
I ACK the patch itself, but since you have to resend anyway, please kill
the braces surrounding the above single-C-stmt lines.
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
