On Wed, Oct 23, 2019 at 11:44:24AM +0200, Martin Fuzzey wrote: > The LAN8740, like the 8720, also requires a reset after enabling clock. > The datasheet [1] 3.8.5.1 says: > "During a Hardware reset, an external clock must be supplied > to the XTAL1/CLKIN signal." > > I have observed this issue on a custom i.MX6 based board with > the LAN8740A. > > [1] http://ww1.microchip.com/downloads/en/DeviceDoc/8740a.pdf > > Signed-off-by: Martin Fuzzey <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]> Andrew
