This patch adds the necessary MDIO interface node to the Qualcomm IPQ4019 DTSI.
Built-in QCA8337N switch is managed using it, and since we have a driver for it lets add it. Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: Robert Marko <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Cc: Luka Perkov <[email protected]> --- Changes from v4 to v5: * Rebase to apply on net-next Changes from v3 to v4: * Change compatible to IPQ4019 Changes from v2 to v3: * Correct commit title arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index bfa9ce4c6e69..b9839f86e703 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -576,5 +576,33 @@ wifi1: wifi@a800000 { "legacy"; status = "disabled"; }; + + mdio: mdio@90000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "qcom,ipq4019-mdio"; + reg = <0x90000 0x64>; + status = "disabled"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + + ethphy2: ethernet-phy@2 { + reg = <2>; + }; + + ethphy3: ethernet-phy@3 { + reg = <3>; + }; + + ethphy4: ethernet-phy@4 { + reg = <4>; + }; + }; }; }; -- 2.26.2
