On 03.05.2020 04:28, Lauri Jakku wrote:
> Hi,
>
> On 3.5.2020 4.34, Lauri Jakku wrote:
>> Hi,
>>
>>
>> On 3.5.2020 3.11, Lauri Jakku wrote:
>>>
>>> On 3.5.2020 2.15, Heiner Kallweit wrote:
>>>> On 03.05.2020 00:42, Lauri Jakku wrote:
>>>>> Hi,
>>>>>
>>>>>
>>>>>
>>>>> On 2.5.2020 20.56, Lauri Jakku wrote:
>>>>>> Hi,
>>>>>>
>>>>>> On 1.5.2020 22.12, Lauri Jakku wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>>
>>>>>>> On 19.4.2020 19.00, Heiner Kallweit wrote:
>>>>>>>> On 19.04.2020 18:49, Lauri Jakku wrote:
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> On 19.4.2020 18.09, Lauri Jakku wrote:
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> On 18.4.2020 21.46, Lauri Jakku wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> On 18.4.2020 14.06, Lauri Jakku wrote:
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> On 17.4.2020 10.30, Lauri Jakku wrote:
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 17.4.2020 9.23, Lauri Jakku wrote:
>>>>>>>>>>>>>> On 16.4.2020 23.50, Heiner Kallweit wrote:
>>>>>>>>>>>>>>> On 16.04.2020 22:38, Lauri Jakku wrote:
>>>>>>>>>>>>>>>> Hi
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On 16.4.2020 23.10, Lauri Jakku wrote:
>>>>>>>>>>>>>>>>> On 16.4.2020 23.02, Heiner Kallweit wrote:
>>>>>>>>>>>>>>>>>> On 16.04.2020 21:58, Lauri Jakku wrote:
>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On 16.4.2020 21.37, Lauri Jakku wrote:
>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On 16.4.2020 21.26, Heiner Kallweit wrote:
>>>>>>>>>>>>>>>>>>>>> On 16.04.2020 13:30, Lauri Jakku wrote:
>>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> 5.6.3-2-MANJARO: stock manjaro kernel, without
>>>>>>>>>>>>>>>>>>>>>> modifications --> network does not work
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> 5.6.3-2-MANJARO-lja: No attach check, modified kernel
>>>>>>>>>>>>>>>>>>>>>> (r8169 mods only) --> network does not work
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> 5.6.3-2-MANJARO-with-the-r8169-patch: phy patched +
>>>>>>>>>>>>>>>>>>>>>> r8169 mods -> devices show up ok, network works
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> All different initcpio's have realtek.ko in them.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Thanks for the logs. Based on the logs you're presumable
>>>>>>>>>>>>>>>>>>>>> affected by a known BIOS bug.
>>>>>>>>>>>>>>>>>>>>> Check bug tickets 202275 and 207203 at
>>>>>>>>>>>>>>>>>>>>> bugzilla.kernel.org.
>>>>>>>>>>>>>>>>>>>>> In the first referenced tickets it's about the same
>>>>>>>>>>>>>>>>>>>>> mainboard (with earlier BIOS version).
>>>>>>>>>>>>>>>>>>>>> BIOS on this mainboard seems to not initialize the
>>>>>>>>>>>>>>>>>>>>> network chip / PHY correctly, it reports
>>>>>>>>>>>>>>>>>>>>> a random number as PHY ID, resulting in no PHY driver
>>>>>>>>>>>>>>>>>>>>> being found.
>>>>>>>>>>>>>>>>>>>>> Enable "Onboard LAN Boot ROM" in the BIOS, and your
>>>>>>>>>>>>>>>>>>>>> problem should be gone.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> OK, I try that, thank you :)
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> It seems that i DO have the ROM's enabled, i'm now testing
>>>>>>>>>>>>>>>>>>> some mutex guard for phy state and try to use it as
>>>>>>>>>>>>>>>>>>> indicator
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> that attach has been done. One thing i've noticed is that
>>>>>>>>>>>>>>>>>>> driver needs to be reloaded to allow traffic (ie. ping
>>>>>>>>>>>>>>>>>>> works etc.)
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> All that shouldn't be needed. Just check with which PHY ID
>>>>>>>>>>>>>>>>>> the PHY comes up.
>>>>>>>>>>>>>>>>>> And what do you mean with "it seems"? Is the option enabled
>>>>>>>>>>>>>>>>>> or not?
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I do have ROM's enabled, and it does not help with my issue.
>>>>>>>>>>>>>>> Your BIOS is a beta version, downgrading to F7 may help. Then
>>>>>>>>>>>>>>> you have the same
>>>>>>>>>>>>>>> mainboard + BIOS as the user who opened bug ticket 202275.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>> huhti 17 09:01:49 MinistryOfSillyWalk kernel: r8169
>>>>>>>>>>>>>> 0000:03:00.0: PHY version: 0xc2077002
>>>>>>>>>>>>>> huhti 17 09:01:49 MinistryOfSillyWalk kernel: r8169
>>>>>>>>>>>>>> 0000:03:00.0: MAC version: 23
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ....
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> huhti 17 09:03:29 MinistryOfSillyWalk kernel: r8169
>>>>>>>>>>>>>> 0000:02:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> huhti 17 09:03:29 MinistryOfSillyWalk kernel: r8169
>>>>>>>>>>>>>> 0000:02:00.0: MAC version: 23
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> .. after module unload & load cycle:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> huhti 17 09:17:35 MinistryOfSillyWalk kernel: r8169
>>>>>>>>>>>>>> 0000:02:00.0: PHY version: 0x1cc912
>>>>>>>>>>>>>> huhti 17 09:17:35 MinistryOfSillyWalk kernel: r8169
>>>>>>>>>>>>>> 0000:02:00.0: MAC version: 23
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> it seem to be the case that the phy_id chances onetime, then
>>>>>>>>>>>>>> stays the same. I'll do few shutdowns and see
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> is there a pattern at all .. next i'm going to try how it
>>>>>>>>>>>>>> behaves, if i read mac/phy versions twice on MAC version 23.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The BIOS downgrade: I'd like to solve this without downgrading
>>>>>>>>>>>>>> BIOS. If I can't, then I'll do systemd-service that
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> reloads r8169 driver at boot, cause then network is just fine.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> What i've gathered samples now, there is three values for PHY ID:
>>>>>>>>>>>>>
>>>>>>>>>>>>> [sillyme@MinistryOfSillyWalk KernelStuff]$ sudo journalctl |grep
>>>>>>>>>>>>> "PHY ver"
>>>>>>>>>>>>> huhti 17 09:01:49 MinistryOfSillyWalk kernel: r8169 0000:02:00.0:
>>>>>>>>>>>>> PHY version: 0xc2077002
>>>>>>>>>>>>> huhti 17 09:01:49 MinistryOfSillyWalk kernel: r8169 0000:03:00.0:
>>>>>>>>>>>>> PHY version: 0xc2077002
>>>>>>>>>>>>> huhti 17 09:03:29 MinistryOfSillyWalk kernel: r8169 0000:02:00.0:
>>>>>>>>>>>>> PHY version: 0x1cc912
>>>>>>>>>>>>> huhti 17 09:03:29 MinistryOfSillyWalk kernel: r8169 0000:03:00.0:
>>>>>>>>>>>>> PHY version: 0x1cc912
>>>>>>>>>>>>> huhti 17 09:17:35 MinistryOfSillyWalk kernel: r8169 0000:02:00.0:
>>>>>>>>>>>>> PHY version: 0x1cc912
>>>>>>>>>>>>> huhti 17 09:17:35 MinistryOfSillyWalk kernel: r8169 0000:03:00.0:
>>>>>>>>>>>>> PHY version: 0x1cc912
>>>>>>>>>>>>> huhti 17 09:24:53 MinistryOfSillyWalk kernel: r8169 0000:02:00.0:
>>>>>>>>>>>>> PHY version: 0xc1071002
>>>>>>>>>>>>> huhti 17 09:24:53 MinistryOfSillyWalk kernel: r8169 0000:03:00.0:
>>>>>>>>>>>>> PHY version: 0xc1071002
>>>>>>>>>>>>> huhti 17 09:27:59 MinistryOfSillyWalk kernel: r8169 0000:02:00.0:
>>>>>>>>>>>>> PHY version: 0x1cc912
>>>>>>>>>>>>> huhti 17 09:27:59 MinistryOfSillyWalk kernel: r8169 0000:03:00.0:
>>>>>>>>>>>>> PHY version: 0x1cc912
>>>>>>>>>>>>> huhti 17 10:08:42 MinistryOfSillyWalk kernel: r8169 0000:02:00.0:
>>>>>>>>>>>>> PHY version: 0xc1071002
>>>>>>>>>>>>> huhti 17 10:08:42 MinistryOfSillyWalk kernel: r8169 0000:03:00.0:
>>>>>>>>>>>>> PHY version: 0xc1071002
>>>>>>>>>>>>> huhti 17 10:12:07 MinistryOfSillyWalk kernel: r8169 0000:02:00.0:
>>>>>>>>>>>>> PHY version: 0x1cc912
>>>>>>>>>>>>> huhti 17 10:12:07 MinistryOfSillyWalk kernel: r8169 0000:03:00.0:
>>>>>>>>>>>>> PHY version: 0x1cc912
>>>>>>>>>>>>> huhti 17 10:20:35 MinistryOfSillyWalk kernel: r8169 0000:02:00.0:
>>>>>>>>>>>>> PHY version: 0xc1071002
>>>>>>>>>>>>> huhti 17 10:20:35 MinistryOfSillyWalk kernel: r8169 0000:03:00.0:
>>>>>>>>>>>>> PHY version: 0xc1071002
>>>>>>>>>>>>> huhti 17 10:23:46 MinistryOfSillyWalk kernel: r8169 0000:02:00.0:
>>>>>>>>>>>>> PHY version: 0x1cc912
>>>>>>>>>>>>> huhti 17 10:23:46 MinistryOfSillyWalk kernel: r8169 0000:03:00.0:
>>>>>>>>>>>>> PHY version: 0x1cc912
>>>>>>>>>>>>>
>>>>>>>>>>>>> I dont know are those hard coded or what, and are they device
>>>>>>>>>>>>> specific how much.
>>>>>>>>>>>>>
>>>>>>>>>>>>> i haven't coldbooted things up, that may be that something to
>>>>>>>>>>>>> check do they vary how per coldboot.
>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I check the ID, and revert all other changes, and check how it
>>>>>>>>>>>>>>>> is working after adding the PHY id to list.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>> What i've now learned: the patch + script + journald services ->
>>>>>>>>>>>> Results working network, but it is still a workaround.
>>>>>>>>>>>>
>>>>>>>>>>> Following patch trusts the MAC version, another thing witch could
>>>>>>>>>>> help is to derive method to do 2dn pass of the probeing:
>>>>>>>>>>>
>>>>>>>>>>> if specific MAC version is found.
>>>>>>>>>>>
>>>>>>>>>>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c
>>>>>>>>>>> b/drivers/net/ethernet/realtek/r8169_main.c
>>>>>>>>>>> index acd122a88d4a..62b37a1abc24 100644
>>>>>>>>>>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>>>>>>>>>>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>>>>>>>>>>> @@ -5172,13 +5172,18 @@ static int r8169_mdio_register(struct
>>>>>>>>>>> rtl8169_private *tp)
>>>>>>>>>>> if (!tp->phydev) {
>>>>>>>>>>> mdiobus_unregister(new_bus);
>>>>>>>>>>> return -ENODEV;
>>>>>>>>>>> - } else if (tp->mac_version == RTL_GIGA_MAC_NONE) {
>>>>>>>>>>> - /* Most chip versions fail with the genphy driver.
>>>>>>>>>>> - * Therefore ensure that the dedicated PHY driver
>>>>>>>>>>> is loaded.
>>>>>>>>>>> - */
>>>>>>>>>>> - dev_err(&pdev->dev, "Not known MAC version.\n");
>>>>>>>>>>> - mdiobus_unregister(new_bus);
>>>>>>>>>>> - return -EUNATCH;
>>>>>>>>>>> + } else {
>>>>>>>>>>> + dev_info(&pdev->dev, "PHY version: 0x%x\n",
>>>>>>>>>>> tp->phydev->phy_id);
>>>>>>>>>>> + dev_info(&pdev->dev, "MAC version: %d\n",
>>>>>>>>>>> tp->mac_version);
>>>>>>>>>>> +
>>>>>>>>>>> + if (tp->mac_version == RTL_GIGA_MAC_NONE) {
>>>>>>>>>>> + /* Most chip versions fail with the genphy
>>>>>>>>>>> driver.
>>>>>>>>>>> + * Therefore ensure that the dedicated PHY
>>>>>>>>>>> driver is loaded.
>>>>>>>>>>> + */
>>>>>>>>>>> + dev_err(&pdev->dev, "Not known MAC/PHY version.\n",
>>>>>>>>>>> tp->phydev->phy_id);
>>>>>>>>>>> + mdiobus_unregister(new_bus);
>>>>>>>>>>> + return -EUNATCH;
>>>>>>>>>>> + }
>>>>>>>>>>> }
>>>>>>>>>>>
>>>>>>>>>>> /* PHY will be woken up in rtl_open() */
>>>>>>>>>>>
>>>>>>>>>> I just got bleeding edge 5.7.0-1 kernel compiled + firmware's
>>>>>>>>>> updated.. and now up'n'running. There is one (WARN_ONCE) stack
>>>>>>>>>> trace coming from driver, i think i tinker with it next, with above
>>>>>>>>>> patch the network devices shows up and they can be configured.
>>>>>>>>>>
>>>>>>>>> I tought to ask first, before going to make new probe_type for
>>>>>>>>> errorneus hw (propetype + retry counter) to do re-probe if requested,
>>>>>>>>> N times. Or should the r8169_main.c return deferred probe on error on
>>>>>>>>> some MAC enums ? Which approach is design-wise sound ?
>>>>>>>>>
>>>>>>>>> I just tought that the DEFERRED probe may just do the trick i'm
>>>>>>>>> looking ways to implement the re-probeing... hmm. I try the deferred
>>>>>>>>> thing and check would that help.
>>>>>>>>>
>>>>>>>> Playing with options to work around the issue is of course a great way
>>>>>>>> to
>>>>>>>> learn about the kernel. However it's questionable whether a workaround
>>>>>>>> in
>>>>>>>> the driver is acceptable for dealing with the broken BIOS of exactly
>>>>>>>> one
>>>>>>>>> 10 yrs old board (for which even a userspace workaround exists).
>>>>>>> problem recognized: libphy-module get's unloaded for some reason before
>>>>>>> r8169 driver loads -> missing lowlevel functionality -> not working
>>>>>>> driver. This only occurs at 1st load of module.. seeking solution.
>>>>>>>
>>>>>>>
>>>>>>> There is [last unloaded: libphy] entries in log BEFORE r8169 is probed
>>>>>>> first time.
>>>>>>>
>>>>>>>
>>>>>>> Any clue what is responsible for unloading to occur ?
>>>>>>>
>>>>>>>
>>>>>> Right now I'm debugging what is the reason, behind that the module
>>>>>> starts to work properly only when
>>>>>>
>>>>>> unload & reload cycle is done.
>>>>>>
>>>>>>
>>>>>> The libphy is listed as loaded, but the check for low level read/write
>>>>>> function is not set -> r8169 modules rlt_open() fails.
>>>>>>
>>>>>> See here:
>>>>>>
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: ------------[ cut here
>>>>>> ]------------
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: read_page callback not
>>>>>> available, PHY driver not loaded?
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: WARNING: CPU: 3 PID: 787
>>>>>> at drivers/net/phy/phy-core.c:750 phy_save_page+0xb1/0xe3 [libph
>>>>>> y]
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: Modules linked in: cmac
>>>>>> algif_hash algif_skcipher af_alg bnep btusb btrtl btbcm btintel b
>>>>>> luetooth ecdh_generic rfkill ecc uvcvideo videobuf2_vmalloc
>>>>>> videobuf2_memops snd_usb_audio videobuf2_v4l2 videobuf2_common
>>>>>> snd_usbmidi_
>>>>>> lib videodev snd_rawmidi snd_seq_device mc input_leds joydev mousedev
>>>>>> squashfs loop amdgpu snd_hda_codec_realtek gpu_sched i2c_algo_bit
>>>>>> ttm snd_hda_codec_generic drm_kms_helper edac_mce_amd ledtrig_audio
>>>>>> cec rc_core kvm_amd drm ccp snd_hda_codec_hdmi agpgart rng_core kv
>>>>>> m snd_hda_intel syscopyarea sysfillrect ppdev sysimgblt snd_intel_dspcfg
>>>>>> fb_sys_fops snd_hda_codec snd_hda_core snd_hwdep irqbypass wmi
>>>>>> _bmof snd_pcm snd_timer snd evdev pcspkr soundcore parport_pc parport
>>>>>> sp5100_tco mac_hid i2c_piix4 k10temp acpi_cpufreq uinput crypto_u
>>>>>> ser ip_tables x_tables hid_generic usbhid hid ohci_pci virtio_net
>>>>>> net_failover failover firewire_ohci firewire_core crc_itu_t pata_atii
>>>>>> xp ehci_pci ehci_hcd sr_mod cdrom ohci_hcd ata_generic pata_acpi
>>>>>> pata_jmicron wmi floppy
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: r8169 realtek libphy
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: CPU: 3 PID: 787 Comm:
>>>>>> NetworkManager Not tainted 5.7.0-1-raw #12
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: Hardware name: Gigabyte
>>>>>> Technology Co., Ltd. GA-MA790FXT-UD5P/GA-MA790FXT-UD5P, BIOS F8l
>>>>>> 07/15/2010
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: RIP:
>>>>>> 0010:phy_save_page+0xb1/0xe3 [libphy]
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: Code: c8 82 11 c0 e8 06 28
>>>>>> ff cc 85 db 74 47 48 8b 85 48 03 00 00 48 83 b8 68 01 00 00 00 75 10 48
>>>>>> c7 c7 e8 82 11 c0 e8 a9 dd f7 cc <0f> 0b eb 26 48 c7 c7 52 78 11 c0 e8
>>>>>> 99 dd f7 cc 0f 0b 48 8b 85 48
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: RSP: 0018:ffff962c408ef370
>>>>>> EFLAGS: 00010282
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: RAX: 0000000000000000 RBX:
>>>>>> 0000000000000001 RCX: 0000000000000000
>>>>>> touko 02 20:40:04 MinistryOfSillyWalk kernel: RDX: 0000000000000001 RSI:
>>>>>> 0000000000000092 RDI: 00000000ffffffff
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: RBP: ffff8b1af3eb8800 R08:
>>>>>> 00000000000004b3 R09: 0000000000000004
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: R10: 0000000000000000 R11:
>>>>>> 0000000000000001 R12: 00000000ffffffa1
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: R13: 0000000000000002 R14:
>>>>>> 0000000000000002 R15: ffff8b1af3eb8800
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: FS: 00007f07be5d4d80(0000)
>>>>>> GS:ffff8b1af7cc0000(0000) knlGS:0000000000000000
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: CS: 0010 DS: 0000 ES:
>>>>>> 0000 CR0: 0000000080050033
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: CR2: 000055b83aecb008 CR3:
>>>>>> 00000002246b0000 CR4: 00000000000006e0
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: Call Trace:
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: phy_select_page+0x53/0x7a
>>>>>> [libphy]
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: phy_write_paged+0x5c/0xa0
>>>>>> [libphy]
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel:
>>>>>> rtl8168d_1_hw_phy_config+0x9d/0x210 [r8169]
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel:
>>>>>> rtl8169_init_phy+0x19/0x110 [r8169]
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: rtl_open+0x354/0x4d0
>>>>>> [r8169]
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: __dev_open+0xe0/0x170
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel:
>>>>>> __dev_change_flags+0x188/0x1e0
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: dev_change_flags+0x21/0x60
>>>>>> touko 02 20:40:05 MinistryOfSillyWalk kernel: do_setlink+0x78a/0xfd0
>>>>>>
>>>>>>
>>>>>> Something does not setup/register properly at first the way it should.
>>>>>>
>>>>>>
>>>>> I think i solved it: realtek (the phy driver) was missing device entry
>>>>> for the PHY ID reported by the NIC to match -> read_page and write_page
>>>>> function pointers should now be set. The generic PHY does not fill
>>>>>
>>>>> the driver's functionality to read or write pages. It happens to be so
>>>>> that the drivers for |RTL8211B Gigabit Ethernet seems to work just fine
>>>>> for my NIC's.
>>>> The analysis is wrong. The incorrect PHY ID is not root cause of the
>>>> problem, it's caused by a BIOS bug. It's not a valid PHY ID. If you want
>>>> to do something, then you could try to inject a PHY soft reset before
>>>> the MII bus is registered. This should be board-specific, e.g. using
>>>> dmi_check_system().
>>>
>>> Ok, i'll try that approach, thanks for the tip. Hmm, I'll do similar
>>> function mapping what the HW init/config function does determine
>>>
>>> function to use.
>>>
>>>
>>> I'll get back to you when I got something new developed.
>>>
>> Oujeah, now it works OK.. the soft reset was all it needed.
>>
>>
>> Here's the patch:
>>
>> From 06c5deacf3ca9f9258431756a41ff0ba1792f1f7 Mon Sep 17 00:00:00 2001
>> From: Lauri Jakku <[email protected]>
>> Date: Thu, 16 Apr 2020 00:38:51 +0300
>> Subject: [PATCH] NET: r8169 driver identifying improvement.
>>
>> Trust device MAC enum + r8169d NIC soft reset
>> before configuration.
>>
>> This commit adds enumeration check and allows
>> driver to be slow to attach.
>>
>> Signed-off-by: Lauri Jakku <[email protected]>
>> ---
>> drivers/net/ethernet/realtek/r8169_main.c | 24 +++--
>> .../net/ethernet/realtek/r8169_phy_config.c | 80 ++++++++++++++++
>> drivers/net/phy/phy-core.c | 91 ++++++++++++++++++-
>> 3 files changed, 182 insertions(+), 13 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/realtek/r8169_main.c
>> b/drivers/net/ethernet/realtek/r8169_main.c
>> index bf5bf05970a2..a85764f6e448 100644
>> --- a/drivers/net/ethernet/realtek/r8169_main.c
>> +++ b/drivers/net/ethernet/realtek/r8169_main.c
>> @@ -640,7 +640,6 @@ MODULE_AUTHOR("Realtek and the Linux r8169 crew
>> <[email protected]>");
>> MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
>> module_param_named(debug, debug.msg_enable, int, 0);
>> MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
>> -MODULE_SOFTDEP("pre: realtek");
>> MODULE_LICENSE("GPL");
>> MODULE_FIRMWARE(FIRMWARE_8168D_1);
>> MODULE_FIRMWARE(FIRMWARE_8168D_2);
>> @@ -5172,13 +5171,18 @@ static int r8169_mdio_register(struct
>> rtl8169_private *tp)
>> if (!tp->phydev) {
>> mdiobus_unregister(new_bus);
>> return -ENODEV;
>> - } else if (!tp->phydev->drv) {
>> - /* Most chip versions fail with the genphy driver.
>> - * Therefore ensure that the dedicated PHY driver is loaded.
>> - */
>> - dev_err(&pdev->dev, "realtek.ko not loaded, maybe it needs to be
>> added to initramfs?\n");
>> - mdiobus_unregister(new_bus);
>> - return -EUNATCH;
>> + } else {
>> + dev_info(&pdev->dev, "PHY version: 0x%x\n", tp->phydev->phy_id);
>> + dev_info(&pdev->dev, "MAC version: %d\n", tp->mac_version);
>> +
>> + if (tp->mac_version == RTL_GIGA_MAC_NONE) {
>> + /* Most chip versions fail with the genphy driver.
>> + * Therefore ensure that the dedicated PHY driver is loaded.
>> + */
>> + dev_err(&pdev->dev, "Not known MAC/PHY version.\n");
>> + mdiobus_unregister(new_bus);
>> + return -EUNATCH;
>> + }
>> }
>>
>> /* PHY will be woken up in rtl_open() */
>> @@ -5513,6 +5517,9 @@ static int rtl_init_one(struct pci_dev *pdev, const
>> struct pci_device_id *ent)
>> rtl_chip_infos[chipset].name, dev->dev_addr, xid,
>> pci_irq_vector(pdev, 0));
>>
>> + dev_info(&pdev->dev, "PHY version: 0x%x\n", tp->phydev->phy_id);
>> + dev_info(&pdev->dev, "MAC version: %d\n", tp->mac_version);
>> +
>> if (jumbo_max)
>> netif_info(tp, probe, dev,
>> "jumbo features [frames: %d bytes, tx checksumming: %s]\n",
>> @@ -5532,6 +5539,7 @@ static int rtl_init_one(struct pci_dev *pdev, const
>> struct pci_device_id *ent)
>> return rc;
>> }
>>
>> +
>> static struct pci_driver rtl8169_pci_driver = {
>> .name = MODULENAME,
>> .id_table = rtl8169_pci_tbl,
>> diff --git a/drivers/net/ethernet/realtek/r8169_phy_config.c
>> b/drivers/net/ethernet/realtek/r8169_phy_config.c
>> index b73f7d023e99..73d604c7a8a8 100644
>> --- a/drivers/net/ethernet/realtek/r8169_phy_config.c
>> +++ b/drivers/net/ethernet/realtek/r8169_phy_config.c
>> @@ -1243,6 +1243,84 @@ static void rtl8125_2_hw_phy_config(struct
>> rtl8169_private *tp,
>> rtl8125_config_eee_phy(phydev);
>> }
>>
>> +
>> +static void rtl8168d_hw_phy_pre_config_actions(struct rtl8169_private *tp,
>> + struct phy_device *phydev)
>> +{
>> + /* Reset the PHY before configuration. There is BIOS bug that gives
>> + * random PHY ID when device is not soft resetted first. --lja
>> + */
>> + genphy_soft_reset(phydev);
>> +}
>> +
>> +
>> +
>> +void r8169_hw_phy_pre_config_actions(struct rtl8169_private *tp, struct
>> phy_device *phydev,
>> + enum mac_version ver)
>> +{
>> + static const rtl_phy_cfg_fct phy_pre_config_actions[] = {
>> + /* PCI devices. */
>> + [RTL_GIGA_MAC_VER_02] = NULL,
>> + [RTL_GIGA_MAC_VER_03] = NULL,
>> + [RTL_GIGA_MAC_VER_04] = NULL,
>> + [RTL_GIGA_MAC_VER_05] = NULL,
>> + [RTL_GIGA_MAC_VER_06] = NULL,
>> + /* PCI-E devices. */
>> + [RTL_GIGA_MAC_VER_07] = NULL,
>> + [RTL_GIGA_MAC_VER_08] = NULL,
>> + [RTL_GIGA_MAC_VER_09] = NULL,
>> + [RTL_GIGA_MAC_VER_10] = NULL,
>> + [RTL_GIGA_MAC_VER_11] = NULL,
>> + [RTL_GIGA_MAC_VER_12] = NULL,
>> + [RTL_GIGA_MAC_VER_13] = NULL,
>> + [RTL_GIGA_MAC_VER_14] = NULL,
>> + [RTL_GIGA_MAC_VER_15] = NULL,
>> + [RTL_GIGA_MAC_VER_16] = NULL,
>> + [RTL_GIGA_MAC_VER_17] = NULL,
>> + [RTL_GIGA_MAC_VER_18] = NULL,
>> + [RTL_GIGA_MAC_VER_19] = NULL,
>> + [RTL_GIGA_MAC_VER_20] = NULL,
>> + [RTL_GIGA_MAC_VER_21] = NULL,
>> + [RTL_GIGA_MAC_VER_22] = NULL,
>> + [RTL_GIGA_MAC_VER_23] = NULL,
>> + [RTL_GIGA_MAC_VER_24] = NULL,
>> + [RTL_GIGA_MAC_VER_25] = rtl8168d_hw_phy_pre_config_actions,
>> + [RTL_GIGA_MAC_VER_26] = rtl8168d_hw_phy_pre_config_actions,
>> + [RTL_GIGA_MAC_VER_27] = rtl8168d_hw_phy_pre_config_actions,
>> + [RTL_GIGA_MAC_VER_28] = rtl8168d_hw_phy_pre_config_actions,
>> + [RTL_GIGA_MAC_VER_29] = NULL,
>> + [RTL_GIGA_MAC_VER_30] = NULL,
>> + [RTL_GIGA_MAC_VER_31] = NULL,
>> + [RTL_GIGA_MAC_VER_32] = NULL,
>> + [RTL_GIGA_MAC_VER_33] = NULL,
>> + [RTL_GIGA_MAC_VER_34] = NULL,
>> + [RTL_GIGA_MAC_VER_35] = NULL,
>> + [RTL_GIGA_MAC_VER_36] = NULL,
>> + [RTL_GIGA_MAC_VER_37] = NULL,
>> + [RTL_GIGA_MAC_VER_38] = NULL,
>> + [RTL_GIGA_MAC_VER_39] = NULL,
>> + [RTL_GIGA_MAC_VER_40] = NULL,
>> + [RTL_GIGA_MAC_VER_41] = NULL,
>> + [RTL_GIGA_MAC_VER_42] = NULL,
>> + [RTL_GIGA_MAC_VER_43] = NULL,
>> + [RTL_GIGA_MAC_VER_44] = NULL,
>> + [RTL_GIGA_MAC_VER_45] = NULL,
>> + [RTL_GIGA_MAC_VER_46] = NULL,
>> + [RTL_GIGA_MAC_VER_47] = NULL,
>> + [RTL_GIGA_MAC_VER_48] = NULL,
>> + [RTL_GIGA_MAC_VER_49] = NULL,
>> + [RTL_GIGA_MAC_VER_50] = NULL,
>> + [RTL_GIGA_MAC_VER_51] = NULL,
>> + [RTL_GIGA_MAC_VER_52] = NULL,
>> + [RTL_GIGA_MAC_VER_60] = NULL,
>> + [RTL_GIGA_MAC_VER_61] = NULL,
>> + };
>> +
>> + if (phy_pre_config_actions[ver])
>> + phy_pre_config_actions[ver](tp, phydev);
>> +}
>> +
>> +
>> void r8169_hw_phy_config(struct rtl8169_private *tp, struct phy_device
>> *phydev,
>> enum mac_version ver)
>> {
>> @@ -1303,6 +1381,8 @@ void r8169_hw_phy_config(struct rtl8169_private *tp,
>> struct phy_device *phydev,
>> [RTL_GIGA_MAC_VER_60] = rtl8125_1_hw_phy_config,
>> [RTL_GIGA_MAC_VER_61] = rtl8125_2_hw_phy_config,
>> };
>> +
>> + r8169_hw_phy_pre_config_actions(tp, phydev);
>>
>> if (phy_configs[ver])
>> phy_configs[ver](tp, phydev);
>> diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
>> index 66b8c61ca74c..b170185a1ed1 100644
>> --- a/drivers/net/phy/phy-core.c
>> +++ b/drivers/net/phy/phy-core.c
>> @@ -151,6 +151,25 @@ static const struct phy_setting settings[] = {
>> };
>> #undef PHY_SETTING
>>
>> +#ifdef DEBUG
>> +#define R8169_ATTACHED_PRINTK \
>> + printk("Phy is attached check %s @ %d: %d\n", \
>> + __FUNC__, __LINE__, is_attached_check);
>> +
>> +#else
>> +#define R8169_ATTACHED_PRINTK
>> +#endif
>> +
>> +#define PHY_NOT_ATTACHED_CHECK \
>> + { \
>> + void *attached_dev_ptr = (phydev) ? phydev->attached_dev : NULL; \
>> + int is_attached_check = (attached_dev_ptr != NULL) && \
>> + ((phydev) && (phydev->state >= PHY_READY));
>> \
>> + R8169_ATTACHED_PRINTK \
>> + if (! is_attached_check ) return -EOPNOTSUPP; \
>> + };
>> +
>> +
>> /**
>> * phy_lookup_setting - lookup a PHY setting
>> * @speed: speed to match
>> @@ -457,6 +476,9 @@ int phy_read_mmd(struct phy_device *phydev, int devad,
>> u32 regnum)
>> {
>> int ret;
>>
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> phy_lock_mdio_bus(phydev);
>> ret = __phy_read_mmd(phydev, devad, regnum);
>> phy_unlock_mdio_bus(phydev);
>> @@ -479,6 +501,9 @@ int __phy_write_mmd(struct phy_device *phydev, int
>> devad, u32 regnum, u16 val)
>> {
>> int ret;
>>
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> if (regnum > (u16)~0 || devad > 32)
>> return -EINVAL;
>>
>> @@ -518,6 +543,9 @@ int phy_write_mmd(struct phy_device *phydev, int devad,
>> u32 regnum, u16 val)
>> {
>> int ret;
>>
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> phy_lock_mdio_bus(phydev);
>> ret = __phy_write_mmd(phydev, devad, regnum, val);
>> phy_unlock_mdio_bus(phydev);
>> @@ -543,6 +571,10 @@ int phy_modify_changed(struct phy_device *phydev, u32
>> regnum, u16 mask, u16 set)
>> {
>> int ret;
>>
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> +
>> phy_lock_mdio_bus(phydev);
>> ret = __phy_modify_changed(phydev, regnum, mask, set);
>> phy_unlock_mdio_bus(phydev);
>> @@ -587,6 +619,9 @@ int phy_modify(struct phy_device *phydev, u32 regnum,
>> u16 mask, u16 set)
>> {
>> int ret;
>>
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> phy_lock_mdio_bus(phydev);
>> ret = __phy_modify(phydev, regnum, mask, set);
>> phy_unlock_mdio_bus(phydev);
>> @@ -613,6 +648,9 @@ int __phy_modify_mmd_changed(struct phy_device *phydev,
>> int devad, u32 regnum,
>> {
>> int new, ret;
>>
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> ret = __phy_read_mmd(phydev, devad, regnum);
>> if (ret < 0)
>> return ret;
>> @@ -646,6 +684,10 @@ int phy_modify_mmd_changed(struct phy_device *phydev,
>> int devad, u32 regnum,
>> {
>> int ret;
>>
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> +
>> phy_lock_mdio_bus(phydev);
>> ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
>> phy_unlock_mdio_bus(phydev);
>> @@ -671,6 +713,9 @@ int __phy_modify_mmd(struct phy_device *phydev, int
>> devad, u32 regnum,
>> {
>> int ret;
>>
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
>>
>> return ret < 0 ? ret : 0;
>> @@ -694,6 +739,9 @@ int phy_modify_mmd(struct phy_device *phydev, int devad,
>> u32 regnum,
>> {
>> int ret;
>>
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> phy_lock_mdio_bus(phydev);
>> ret = __phy_modify_mmd(phydev, devad, regnum, mask, set);
>> phy_unlock_mdio_bus(phydev);
>> @@ -704,7 +752,11 @@ EXPORT_SYMBOL_GPL(phy_modify_mmd);
>>
>> static int __phy_read_page(struct phy_device *phydev)
>> {
>> - if (WARN_ONCE(!phydev->drv->read_page, "read_page callback not
>> available, PHY driver not loaded?\n"))
>> +
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> + if (WARN(!phydev->drv->read_page, "read_page callback not available,
>> PHY driver not loaded?\n"))
>> return -EOPNOTSUPP;
>>
>> return phydev->drv->read_page(phydev);
>> @@ -712,12 +764,16 @@ static int __phy_read_page(struct phy_device *phydev)
>>
>> static int __phy_write_page(struct phy_device *phydev, int page)
>> {
>> - if (WARN_ONCE(!phydev->drv->write_page, "write_page callback not
>> available, PHY driver not loaded?\n"))
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> + if (WARN(!phydev->drv->write_page, "write_page callback not available,
>> PHY driver not loaded?\n"))
>> return -EOPNOTSUPP;
>>
>> return phydev->drv->write_page(phydev, page);
>> }
>>
>> +
>> /**
>> * phy_save_page() - take the bus lock and save the current page
>> * @phydev: a pointer to a &struct phy_device
>> @@ -728,7 +784,11 @@ static int __phy_write_page(struct phy_device *phydev,
>> int page)
>> */
>> int phy_save_page(struct phy_device *phydev)
>> {
>> - phy_lock_mdio_bus(phydev);
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> +
>> + phy_lock_mdio_bus(phydev);
>> return __phy_read_page(phydev);
>> }
>> EXPORT_SYMBOL_GPL(phy_save_page);
>> @@ -748,7 +808,10 @@ int phy_select_page(struct phy_device *phydev, int page)
>> {
>> int ret, oldpage;
>>
>> - oldpage = ret = phy_save_page(phydev);
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> + oldpage = ret = phy_save_page(phydev);
>> if (ret < 0)
>> return ret;
>>
>> @@ -782,6 +845,9 @@ int phy_restore_page(struct phy_device *phydev, int
>> oldpage, int ret)
>> {
>> int r;
>>
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> if (oldpage >= 0) {
>> r = __phy_write_page(phydev, oldpage);
>>
>> @@ -812,6 +878,9 @@ EXPORT_SYMBOL_GPL(phy_restore_page);
>> int phy_read_paged(struct phy_device *phydev, int page, u32 regnum)
>> {
>> int ret = 0, oldpage;
>> +
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>>
>> oldpage = phy_select_page(phydev, page);
>> if (oldpage >= 0)
>> @@ -834,6 +903,10 @@ int phy_write_paged(struct phy_device *phydev, int
>> page, u32 regnum, u16 val)
>> {
>> int ret = 0, oldpage;
>>
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> +
>> oldpage = phy_select_page(phydev, page);
>> if (oldpage >= 0)
>> ret = __phy_write(phydev, regnum, val);
>> @@ -856,6 +929,9 @@ int phy_modify_paged_changed(struct phy_device *phydev,
>> int page, u32 regnum,
>> u16 mask, u16 set)
>> {
>> int ret = 0, oldpage;
>> +
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>>
>> oldpage = phy_select_page(phydev, page);
>> if (oldpage >= 0)
>> @@ -878,7 +954,12 @@ EXPORT_SYMBOL(phy_modify_paged_changed);
>> int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum,
>> u16 mask, u16 set)
>> {
>> - int ret = phy_modify_paged_changed(phydev, page, regnum, mask, set);
>> + int ret = -1;
>> +
>> + /* If not attached, do nothing. */
>> + PHY_NOT_ATTACHED_CHECK;
>> +
>> + ret = phy_modify_paged_changed(phydev, page, regnum, mask, set);
>>
>> return ret < 0 ? ret : 0;
>> }
>
> here is the polished patch:
>
> From 6dd6f2813c543dc728efb8dca796bbbe870bd031 Mon Sep 17 00:00:00 2001
> From: Lauri Jakku <[email protected]>
> Date: Thu, 16 Apr 2020 00:38:51 +0300
> Subject: [PATCH] NET: r8169 driver identifying improvement.
>
> Trust device MAC enum + r8169d NIC soft reset
> before configuration.
>
> This commit adds enumeration check and allows
> driver to be slow to attach.
>
> Signed-off-by: Lauri Jakku <[email protected]>
> ---
> drivers/net/ethernet/realtek/r8169_main.c | 21 +++--
> .../net/ethernet/realtek/r8169_phy_config.c | 80 +++++++++++++++++++
> 2 files changed, 93 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/net/ethernet/realtek/r8169_main.c
> b/drivers/net/ethernet/realtek/r8169_main.c
> index bf5bf05970a2..6828e755a460 100644
> --- a/drivers/net/ethernet/realtek/r8169_main.c
> +++ b/drivers/net/ethernet/realtek/r8169_main.c
> @@ -640,7 +640,6 @@ MODULE_AUTHOR("Realtek and the Linux r8169 crew
> <[email protected]>");
> MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver");
> module_param_named(debug, debug.msg_enable, int, 0);
> MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
> -MODULE_SOFTDEP("pre: realtek");
> MODULE_LICENSE("GPL");
> MODULE_FIRMWARE(FIRMWARE_8168D_1);
> MODULE_FIRMWARE(FIRMWARE_8168D_2);
> @@ -5172,13 +5171,18 @@ static int r8169_mdio_register(struct rtl8169_private
> *tp)
> if (!tp->phydev) {
> mdiobus_unregister(new_bus);
> return -ENODEV;
> - } else if (!tp->phydev->drv) {
> - /* Most chip versions fail with the genphy driver.
> - * Therefore ensure that the dedicated PHY driver is loaded.
> - */
> - dev_err(&pdev->dev, "realtek.ko not loaded, maybe it needs to be
> added to initramfs?\n");
> - mdiobus_unregister(new_bus);
> - return -EUNATCH;
> + } else {
> + dev_info(&pdev->dev, "PHY version: 0x%x\n", tp->phydev->phy_id);
> + dev_info(&pdev->dev, "MAC version: %d\n", tp->mac_version);
> +
> + if (tp->mac_version == RTL_GIGA_MAC_NONE) {
> + /* Most chip versions fail with the genphy driver.
> + * Therefore ensure that the dedicated PHY driver is loaded.
> + */
> + dev_err(&pdev->dev, "Not known MAC/PHY version.\n");
> + mdiobus_unregister(new_bus);
> + return -EUNATCH;
> + }
> }
>
> /* PHY will be woken up in rtl_open() */
> @@ -5532,6 +5536,7 @@ static int rtl_init_one(struct pci_dev *pdev, const
> struct pci_device_id *ent)
> return rc;
> }
>
> +
> static struct pci_driver rtl8169_pci_driver = {
> .name = MODULENAME,
> .id_table = rtl8169_pci_tbl,
> diff --git a/drivers/net/ethernet/realtek/r8169_phy_config.c
> b/drivers/net/ethernet/realtek/r8169_phy_config.c
> index b73f7d023e99..f13f68b79a92 100644
> --- a/drivers/net/ethernet/realtek/r8169_phy_config.c
> +++ b/drivers/net/ethernet/realtek/r8169_phy_config.c
> @@ -1243,6 +1243,84 @@ static void rtl8125_2_hw_phy_config(struct
> rtl8169_private *tp,
> rtl8125_config_eee_phy(phydev);
> }
>
> +
> +static void rtl8168d_hw_phy_pre_config_actions(struct rtl8169_private *tp,
> + struct phy_device *phydev)
> +{
> + /* Reset the PHY before configuration. There is BIOS bug that gives
> + * random PHY ID when device is not soft resetted first. --lja
> + */
> + genphy_soft_reset(phydev);
> +}
> +
> +
> +
> +void r8169_hw_phy_pre_config_actions(struct rtl8169_private *tp, struct
> phy_device *phydev,
> + enum mac_version ver)
> +{
> + static const rtl_phy_cfg_fct phy_pre_config_actions[] = {
> + /* PCI devices. */
> + [RTL_GIGA_MAC_VER_02] = NULL,
> + [RTL_GIGA_MAC_VER_03] = NULL,
> + [RTL_GIGA_MAC_VER_04] = NULL,
> + [RTL_GIGA_MAC_VER_05] = NULL,
> + [RTL_GIGA_MAC_VER_06] = NULL,
> + /* PCI-E devices. */
> + [RTL_GIGA_MAC_VER_07] = NULL,
> + [RTL_GIGA_MAC_VER_08] = NULL,
> + [RTL_GIGA_MAC_VER_09] = NULL,
> + [RTL_GIGA_MAC_VER_10] = NULL,
> + [RTL_GIGA_MAC_VER_11] = NULL,
> + [RTL_GIGA_MAC_VER_12] = NULL,
> + [RTL_GIGA_MAC_VER_13] = NULL,
> + [RTL_GIGA_MAC_VER_14] = NULL,
> + [RTL_GIGA_MAC_VER_15] = NULL,
> + [RTL_GIGA_MAC_VER_16] = NULL,
> + [RTL_GIGA_MAC_VER_17] = NULL,
> + [RTL_GIGA_MAC_VER_18] = NULL,
> + [RTL_GIGA_MAC_VER_19] = NULL,
> + [RTL_GIGA_MAC_VER_20] = NULL,
> + [RTL_GIGA_MAC_VER_21] = NULL,
> + [RTL_GIGA_MAC_VER_22] = NULL,
> + [RTL_GIGA_MAC_VER_23] = NULL,
> + [RTL_GIGA_MAC_VER_24] = NULL,
> + [RTL_GIGA_MAC_VER_25] = rtl8168d_hw_phy_pre_config_actions,
> + [RTL_GIGA_MAC_VER_26] = rtl8168d_hw_phy_pre_config_actions,
> + [RTL_GIGA_MAC_VER_27] = rtl8168d_hw_phy_pre_config_actions,
> + [RTL_GIGA_MAC_VER_28] = rtl8168d_hw_phy_pre_config_actions,
> + [RTL_GIGA_MAC_VER_29] = NULL,
> + [RTL_GIGA_MAC_VER_30] = NULL,
> + [RTL_GIGA_MAC_VER_31] = NULL,
> + [RTL_GIGA_MAC_VER_32] = NULL,
> + [RTL_GIGA_MAC_VER_33] = NULL,
> + [RTL_GIGA_MAC_VER_34] = NULL,
> + [RTL_GIGA_MAC_VER_35] = NULL,
> + [RTL_GIGA_MAC_VER_36] = NULL,
> + [RTL_GIGA_MAC_VER_37] = NULL,
> + [RTL_GIGA_MAC_VER_38] = NULL,
> + [RTL_GIGA_MAC_VER_39] = NULL,
> + [RTL_GIGA_MAC_VER_40] = NULL,
> + [RTL_GIGA_MAC_VER_41] = NULL,
> + [RTL_GIGA_MAC_VER_42] = NULL,
> + [RTL_GIGA_MAC_VER_43] = NULL,
> + [RTL_GIGA_MAC_VER_44] = NULL,
> + [RTL_GIGA_MAC_VER_45] = NULL,
> + [RTL_GIGA_MAC_VER_46] = NULL,
> + [RTL_GIGA_MAC_VER_47] = NULL,
> + [RTL_GIGA_MAC_VER_48] = NULL,
> + [RTL_GIGA_MAC_VER_49] = NULL,
> + [RTL_GIGA_MAC_VER_50] = NULL,
> + [RTL_GIGA_MAC_VER_51] = NULL,
> + [RTL_GIGA_MAC_VER_52] = NULL,
> + [RTL_GIGA_MAC_VER_60] = NULL,
> + [RTL_GIGA_MAC_VER_61] = NULL,
> + };
> +
> + if (phy_pre_config_actions[ver])
> + phy_pre_config_actions[ver](tp, phydev);
> +}
> +
> +
> void r8169_hw_phy_config(struct rtl8169_private *tp, struct phy_device
> *phydev,
> enum mac_version ver)
> {
> @@ -1304,6 +1382,8 @@ void r8169_hw_phy_config(struct rtl8169_private *tp,
> struct phy_device *phydev,
> [RTL_GIGA_MAC_VER_61] = rtl8125_2_hw_phy_config,
> };
>
> + r8169_hw_phy_pre_config_actions(tp, phydev, ver);
> +
> if (phy_configs[ver])
> phy_configs[ver](tp, phydev);
> }
The PHY ID is checked from devm_mdiobus_register(), you're way too late
with the soft reset. Also I said if a quirk is needed then it has to be
board-specific. This is not a problem of the chip version in general.
What you do in r8169_mdio_register() is simply wrong.
Last but not least you mix 100 different things in one patch.
