This update man page for PRP support
Signed-off-by: Murali Karicheri <[email protected]>
---
man/man8/ip-link.8.in | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in
index 939e2ad49f4e..56d95a79eac5 100644
--- a/man/man8/ip-link.8.in
+++ b/man/man8/ip-link.8.in
@@ -1383,6 +1383,35 @@ corresponds to the 2010 version of the HSR standard.
Option "1" activates the
2012 version.
.in -8
+.TP
+Parallel Redundancy Protocol (PRP) Support
+For a link of type
+.I PRP
+the following additional arguments are supported:
+
+.BI "ip link add link " DEVICE " name " NAME " type prp"
+.BI slave1 " SLAVE1-IF " slave2 " SLAVE2-IF "
+.RB [ " supervision"
+.IR ADDR-BYTE " ] ["
+.BR version " { " 0 " | " 1 " } ]"
+
+.in +8
+.sp
+.BR type " prp "
+- specifies the link type to use, here PRP.
+
+.BI slave1 " SLAVE1-IF "
+- Specifies the physical device used for the first of the two redundant ports.
+
+.BI slave2 " SLAVE2-IF "
+- Specifies the physical device used for the second of the two redundant ports.
+
+.BI supervision " ADDR-BYTE"
+- The last byte of the multicast address used for PRP supervision frames.
+Default option is "0", possible values 0-255.
+
+.in -8
+
.TP
BRIDGE Type Support
For a link of type
--
2.17.1
