Move the ID check from get_phy_device() into get_phy_c22_id(), which
simplifies get_phy_device(). The ID reading functions are now
responsible for indicating whether they found a PHY or not via their
return code - they must return -ENODEV when a PHY is not present.
Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
---
drivers/net/phy/phy_device.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 53b914ee5031..424e608cec21 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -759,8 +759,10 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr,
* @addr: PHY address on the MII bus
* @phy_id: where to store the ID retrieved.
*
- * Read the 802.3 clause 22 PHY ID from the PHY at @addr on the @bus.
- * Return the PHY ID read from the PHY in @phy_id on successful access.
+ * Read the 802.3 clause 22 PHY ID from the PHY at @addr on the @bus,
+ * placing it in @phy_id. Return zero on successful read and the ID is
+ * valid, %-EIO on bus access error, or %-ENODEV if no device responds
+ * or invalid ID.
*/
static int get_phy_c22_id(struct mii_bus *bus, int addr, u32 *phy_id)
{
@@ -782,6 +784,10 @@ static int get_phy_c22_id(struct mii_bus *bus, int addr,
u32 *phy_id)
*phy_id |= phy_reg;
+ /* If the phy_id is mostly Fs, there is no device there */
+ if ((*phy_id & 0x1fffffff) == 0x1fffffff)
+ return -ENODEV;
+
return 0;
}
@@ -812,10 +818,6 @@ struct phy_device *get_phy_device(struct mii_bus *bus, int
addr, bool is_c45)
if (r)
return ERR_PTR(r);
- /* If the phy_id is mostly Fs, there is no device there */
- if ((phy_id & 0x1fffffff) == 0x1fffffff)
- return ERR_PTR(-ENODEV);
-
return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
}
EXPORT_SYMBOL(get_phy_device);
--
2.20.1
