Hello, I'm using the upstream driver Vladimir mentioned, as of 5.4.51. Best regards Marvin Gaube
-----Ursprüngliche Nachricht----- Von: Florian Fainelli <f.faine...@gmail.com> Gesendet: Dienstag, 4. August 2020 22:20 An: Vladimir Oltean <olte...@gmail.com> Cc: Gaube, Marvin (THSE-TL1) <marvin.ga...@tesat.de>; Woojung Huh <woojung....@microchip.com>; Microchip Linux Driver Support <unglinuxdri...@microchip.com>; netdev@vger.kernel.org Betreff: Re: PROBLEM: (DSA/Microchip): 802.1Q-Header lost on KSZ9477-DSA ingress without bridge On 8/4/2020 12:54 PM, Vladimir Oltean wrote: > On Tue, Aug 04, 2020 at 08:51:00AM -0700, Florian Fainelli wrote: >> "I looked into it deeper, the driver does rxvlan offloading." >> >> Is this part of the driver upstream or are you using a vendor tree >> from Freescale which has that change included? >> > > Does it matter? If this was a downstream problem yes, there would not necessarily be a pressing need to address it with a patch targeting 'net' for instance. This is not the case, therefore it should be addressed. > FWIW, mainline fec does declare NETIF_F_HW_VLAN_CTAG_RX: > https://elixir.bootlin.com/linux/latest/source/drivers/net/ethernet/fr > eescale/fec_main.c#L3317 and move it to the hwaccel area on RX: > https://elixir.bootlin.com/linux/latest/source/drivers/net/ethernet/fr > eescale/fec_main.c#L1513 > -- Florian ________________________________ Tesat-Spacecom GmbH & Co. KG Sitz: Backnang; Registergericht: Amtsgericht Stuttgart HRA 270977 Persoenlich haftender Gesellschafter: Tesat-Spacecom Geschaeftsfuehrungs GmbH; Sitz: Backnang; Registergericht: Amtsgericht Stuttgart HRB 271658; Geschaeftsfuehrung: Dr. Marc Steckling, Kerstin Basche, Ralf Zimmermann [banner]