Hi Florian
> Some Ethernet PHYs may require that their clock, which typically drives
> their logic to respond to reads on the MDIO bus be enabled before
> issusing a MDIO bus scan.
issuing
>
> We have a chicken and egg problem though which is that we cannot enable
> a given Ethernet PHY's device clock until we have a phy_device instance
> create and called the driver's probe function. This will not happen
> unless we are successful in probing the PHY device, which requires its
> clock(s) to be turned on.
>
> For DT based systems we can solve this by using of_clk_get() which
> operates on a device_node reference, and make sure that all clocks
> associaed with the node are enabled prior to doing any reads towards the
associated
Not fully looked at the code yet.
Andrew
