> > > On Wed, 2 Dec 2020 10:17:43 -0600 Mario Limonciello wrote:
> > > > commit e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME
> > > systems")
> > > > disabled s0ix flows for systems that have various incarnations of the
> > > > i219-LM ethernet controller. This was done because of some regressions
> > > > caused by an earlier
> > > > commit 632fbd5eb5b0e ("e1000e: fix S0ix flows for cable connected case")
> > > > with i219-LM controller.
> > > >
> > > > Performing suspend to idle with these ethernet controllers requires a
> > > properly
> > > > configured system. To make enabling such systems easier, this patch
> > > > series allows turning on using ethtool.
> > > >
> > > > The flows have also been confirmed to be configured correctly on Dell's
> > > Latitude
> > > > and Precision CML systems containing the i219-LM controller, when the
> kernel
> > > also
> > > > contains the fix for s0i3.2 entry previously submitted here:
> > > > https://marc.info/?l=linux-netdev&m=160677194809564&w=2
> > > >
> > > > Patches 3 and 4 will turn the behavior on by default for Dell's CML
> systems.
> > > > Patch 5 allows accessing the value of the flags via ethtool to tell if
> the
> > > > heuristics have turned on s0ix flows, as well as for development
> purposes
> > > > to determine if a system should be added to the heuristics list.
> > >
> > > I don't see PCI or Bjorn Helgaas CCed.
> > >
> > > You can drop linux-kernel tho.
> >
> > Correct, that was intentional that PCI (and Bjorn) weren't added. Since I
> came
> > up with a way to detect platforms without DMI as suggested and this is
> entirely
> > controlling a driver behavior within e1000e only on systems with i219-LM I
> > didn't think that PCI ML was actually needed.
> >
> > Since you disagree, I'll add Bjorn into this thread.
> >
> > @Bjorn Helgaas,
> >
> > Apologies that you're looped in this way rather than directly to the
> submission,
> > but the cover letter is above and the patch series can be viewed at this
> patchwork
> > if you would like to fetch the mbox and respond to provide any comments.
> >
> > https://patchwork.ozlabs.org/project/netdev/list/?series=218121
> >
> > I'll include you directly if any future v3 is necessary.
>
> No need, I don't think. AFAICT there's nothing there related to the
> PCI core. Thanks!
>
> Bjorn
Thanks, appreciate your comments on my terrible grammar.
I'll fix up my commits from the series and submit v3 once I've got some code
feedback
from netdev folks.
