From: Eran Ben Elisha <[email protected]>

Add needed structure layouts and defines for MTUTC (Management UTC)
register. MTUTC will be used for cyc2time HW translation.

In addition, add cyc2time modify capability bit and init segment HCA
real time address.

Finally, add capability bits indicating which time-stamping format is
supported per SQ and RQ. Add ts_format in the queue's context layout to
allow configuration.

Signed-off-by: Eran Ben Elisha <[email protected]>
Signed-off-by: Aya Levin <[email protected]>
Reviewed-by: Moshe Shemesh <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
---
 include/linux/mlx5/device.h   |  5 ++++-
 include/linux/mlx5/driver.h   |  1 +
 include/linux/mlx5/mlx5_ifc.h | 30 ++++++++++++++++++++++++++++--
 3 files changed, 33 insertions(+), 3 deletions(-)

diff --git a/include/linux/mlx5/device.h b/include/linux/mlx5/device.h
index f1de49d64a98..fd694add6ff0 100644
--- a/include/linux/mlx5/device.h
+++ b/include/linux/mlx5/device.h
@@ -578,7 +578,10 @@ struct mlx5_init_seg {
        __be32                  internal_timer_l;
        __be32                  rsvd3[2];
        __be32                  health_counter;
-       __be32                  rsvd4[1019];
+       __be32                  rsvd4[11];
+       __be32                  real_time_h;
+       __be32                  real_time_l;
+       __be32                  rsvd5[1006];
        __be64                  ieee1588_clk;
        __be32                  ieee1588_clk_type;
        __be32                  clr_intx;
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index f93bfe7473aa..2eb7755143d7 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -143,6 +143,7 @@ enum {
        MLX5_REG_MPCNT           = 0x9051,
        MLX5_REG_MTPPS           = 0x9053,
        MLX5_REG_MTPPSE          = 0x9054,
+       MLX5_REG_MTUTC           = 0x9055,
        MLX5_REG_MPEGC           = 0x9056,
        MLX5_REG_MCQS            = 0x9060,
        MLX5_REG_MCQI            = 0x9061,
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index 436d6f421dfd..7059fcdf54a3 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -9150,6 +9150,28 @@ struct mlx5_ifc_mpegc_reg_bits {
        u8         reserved_at_60[0x100];
 };
 
+enum {
+       MLX5_MTUTC_OPERATION_SET_TIME_IMMEDIATE   = 0x1,
+       MLX5_MTUTC_OPERATION_ADJUST_TIME          = 0x2,
+       MLX5_MTUTC_OPERATION_ADJUST_FREQ_UTC      = 0x3,
+};
+
+struct mlx5_ifc_mtutc_reg_bits {
+       u8         reserved_at_0[0x1c];
+       u8         operation[0x4];
+
+       u8         freq_adjustment[0x20];
+
+       u8         reserved_at_40[0x40];
+
+       u8         utc_sec[0x20];
+
+       u8         reserved_at_a0[0x2];
+       u8         utc_nsec[0x1e];
+
+       u8         time_adjustment[0x20];
+};
+
 struct mlx5_ifc_pcam_enhanced_features_bits {
        u8         reserved_at_0[0x68];
        u8         fec_50G_per_lane_in_pplm[0x1];
@@ -9208,7 +9230,9 @@ struct mlx5_ifc_pcam_reg_bits {
 };
 
 struct mlx5_ifc_mcam_enhanced_features_bits {
-       u8         reserved_at_0[0x6e];
+       u8         reserved_at_0[0x6b];
+       u8         ptpcyc2realtime_modify[0x1];
+       u8         reserved_at_6c[0x2];
        u8         pci_status_and_power[0x1];
        u8         reserved_at_6f[0x5];
        u8         mark_tx_action_cnp[0x1];
@@ -9231,7 +9255,8 @@ struct mlx5_ifc_mcam_access_reg_bits {
 
        u8         regs_95_to_87[0x9];
        u8         mpegc[0x1];
-       u8         regs_85_to_68[0x12];
+       u8         mtutc[0x1];
+       u8         regs_84_to_68[0x11];
        u8         tracer_registers[0x4];
 
        u8         regs_63_to_32[0x20];
@@ -9964,6 +9989,7 @@ union mlx5_ifc_ports_control_registers_document_bits {
        struct mlx5_ifc_mcda_reg_bits mcda_reg;
        struct mlx5_ifc_mirc_reg_bits mirc_reg;
        struct mlx5_ifc_mfrl_reg_bits mfrl_reg;
+       struct mlx5_ifc_mtutc_reg_bits mtutc_reg;
        u8         reserved_at_0[0x60e0];
 };
 
-- 
2.29.2

Reply via email to