On Fri, Feb 12, 2021 at 07:46:32PM -0800, Florian Fainelli wrote:
> BCM54210E/BCM50212E has been verified to work correctly with the
> auto-power down configuration done by bcm54xx_adjust_rxrefclk(), add it
> to the list of PHYs working.
>
> While we are at it, provide an appropriate name for the bit we are
> changing which disables the RXC and TXC during auto-power down when
> there is no energy on the cable.
>
> Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
> ---
Reviewed-by: Vladimir Oltean <olte...@gmail.com>
> drivers/net/phy/broadcom.c | 8 +++++---
> include/linux/brcmphy.h | 2 +-
> 2 files changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
> index 3ce266ab521b..91fbd26c809e 100644
> --- a/drivers/net/phy/broadcom.c
> +++ b/drivers/net/phy/broadcom.c
> @@ -193,6 +193,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device
> *phydev)
> if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 &&
> BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 &&
> BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M &&
> + BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54210E &&
> BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54810 &&
> BRCM_PHY_MODEL(phydev) != PHY_ID_BCM54811)
> return;
> @@ -227,9 +228,10 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device
> *phydev)
> val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
>
> if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) {
> - if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810 ||
> - BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54811)
> - val |= BCM54810_SHD_SCR3_TRDDAPD;
> + if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E ||
> + BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810 ||
> + BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54210E)
> + val |= BCM54XX_SHD_SCR3_RXCTXC_DIS;
> else
> val |= BCM54XX_SHD_SCR3_TRDDAPD;
> }
> diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
> index 844dcfe789a2..16597d3fa011 100644
> --- a/include/linux/brcmphy.h
> +++ b/include/linux/brcmphy.h
> @@ -193,6 +193,7 @@
> #define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001
> #define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002
> #define BCM54XX_SHD_SCR3_TRDDAPD 0x0004
> +#define BCM54XX_SHD_SCR3_RXCTXC_DIS 0x0100
Curiously enough, my BCM5464R datasheet does say:
The TXC and RXC outputs can be disabled during auto-power down by setting the
“1000BASE-T/100BASE-TX/10BASE-T
Spare Control 3 Register (Address 1Ch, Shadow Value 00101),” bit 8 =1.
but when I go to the definition of the register, bit 8 is hidden. Odd.
How can I ensure that the auto power down feature is doing something?
>
> /* 01010: Auto Power-Down */
> #define BCM54XX_SHD_APD 0x0a
> @@ -253,7 +254,6 @@
> #define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN (1 << 0)
> #define BCM54810_SHD_CLK_CTL 0x3
> #define BCM54810_SHD_CLK_CTL_GTXCLK_EN (1 << 9)
> -#define BCM54810_SHD_SCR3_TRDDAPD 0x0100
>
> /* BCM54612E Registers */
> #define BCM54612E_EXP_SPARE0 (MII_BCM54XX_EXP_SEL_ETC + 0x34)
> --
> 2.25.1
>
