PHY loopback is needed for the ethernet controller self test support.
This PHY was tested with the generic net sefltest in combination with
FEC ethernet controller and AR9331 switch.
Signed-off-by: Oleksij Rempel <o.rem...@pengutronix.de>
---
drivers/net/phy/at803x.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index d7799beb811c..f74f427a8da5 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -1128,6 +1128,7 @@ static struct phy_driver at803x_driver[] = {
.get_wol = at803x_get_wol,
.suspend = at803x_suspend,
.resume = at803x_resume,
+ .set_loopback = genphy_loopback,
/* PHY_GBIT_FEATURES */
.read_status = at803x_read_status,
.config_intr = at803x_config_intr,
@@ -1207,6 +1208,7 @@ static struct phy_driver at803x_driver[] = {
.read_status = at803x_read_status,
.soft_reset = genphy_soft_reset,
.config_aneg = at803x_config_aneg,
+ .set_loopback = genphy_loopback,
} };
module_phy_driver(at803x_driver);
--
2.29.2
