On 6/26/07, OBATA Noboru <[EMAIL PROTECTED]> wrote:
From: OBATA Noboru <[EMAIL PROTECTED]>
Make TCP_RTO_MAX a variable, and allow a user to change it via a
new sysctl entry /proc/sys/net/ipv4/tcp_rto_max. A user can
then guarantee TCP retransmission to be more controllable, say,
at least once per 10 seconds, by setting it to 10. This is
quite helpful on failover-capable network devices, such as an
active-backup bonding device. On such devices, it is desirable
that TCP retransmits a packet shortly after the failover, which
is what I would like to do with this patch. Please see
Background and Problem below for rationale in detail.
RFC2988 says this:
(2.4) Whenever RTO is computed, if it is less than 1 second then the
RTO SHOULD be rounded up to 1 second.
Traditionally, TCP implementations use coarse grain clocks to
measure the RTT and trigger the RTO, which imposes a large
minimum value on the RTO. Research suggests that a large
minimum RTO is needed to keep TCP conservative and avoid
spurious retransmissions [AP99]. Therefore, this
specification requires a large minimum RTO as a conservative
approach, while at the same time acknowledging that at some
future point, research may show that a smaller minimum RTO is
acceptable or superior.
(2.5) A maximum value MAY be placed on RTO provided it is at least 60
seconds.
Your code doesn't seem to meet requirements of section 2.5 as your
minimum is 1 second.
I think if you're trying to solve the bonding issue then you should
solve that issue, not hack the TCP implementation as that opens it up
to abuse in other ways.
Ian
--
Web: http://wand.net.nz/~iam4/
Blog: http://iansblog.jandi.co.nz
WAND Network Research Group
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
