Sasa Ostrouska wrote: [ added netdev to CC ] > Hi people, > > I'm using this on a x86-64 amd machine. During boot of the last > 2.6.22.1 kernel I get this error: > > fb0: VESA VGA frame buffer device > Linux agpgart interface v0.102 (c) Dave Jones > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled > 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > Marvell 88E1101: Registered new driver > Marvell 88E1111: Registered new driver > Marvell 88E1145: Registered new driver > Fixed PHY: Registered new driver > Device '[EMAIL PROTECTED]:1' does not have a release() function, it is broken > and must be fixed. > WARNING: at drivers/base/core.c:107 device_release() > > Call Trace: > [<ffffffff802f16c8>] kobject_cleanup+0x52/0x70 > [<ffffffff802f16e6>] kobject_release+0x0/0x9 > [<ffffffff802f237a>] kref_put+0x74/0x82 > [<ffffffff8035c0be>] fixed_mdio_register_device+0x1f3/0x229 > [<ffffffff805884f6>] fixed_init+0x1f/0x35 > [<ffffffff80216e2d>] flat_send_IPI_mask+0x0/0x4c > [<ffffffff80570910>] kernel_init+0x16f/0x2d5 > [<ffffffff8020a458>] child_rip+0xa/0x12 > [<ffffffff8031763c>] acpi_ds_init_one_object+0x0/0x7f > [<ffffffff805707a1>] kernel_init+0x0/0x2d5 > [<ffffffff8020a44e>] child_rip+0x0/0x12 > > Device '[EMAIL PROTECTED]:1' does not have a release() function, it is broken > and must be fixed. > WARNING: at drivers/base/core.c:107 device_release() > > Call Trace: > [<ffffffff802f16c8>] kobject_cleanup+0x52/0x70 > [<ffffffff802f16e6>] kobject_release+0x0/0x9 > [<ffffffff802f237a>] kref_put+0x74/0x82 > [<ffffffff8035c0be>] fixed_mdio_register_device+0x1f3/0x229 > [<ffffffff80588507>] fixed_init+0x30/0x35 > [<ffffffff80216e2d>] flat_send_IPI_mask+0x0/0x4c > [<ffffffff80570910>] kernel_init+0x16f/0x2d5 > [<ffffffff8020a458>] child_rip+0xa/0x12 > [<ffffffff8031763c>] acpi_ds_init_one_object+0x0/0x7f > [<ffffffff805707a1>] kernel_init+0x0/0x2d5 > [<ffffffff8020a44e>] child_rip+0x0/0x12 > > forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60. > ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23 > ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LMAC] -> GSI 23 (level, > low) -> IRQ 23 > PCI: Setting latency timer of device 0000:00:07.0 to 64 > forcedeth: using HIGHDMA > eth0: forcedeth.c: subsystem: 01849:03ef bound to 0000:00:07.0 > netconsole: not configured, aborting > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0 > > If somebody needs some additional info please cc me.
I got an Oops in 22-git++ with the fixed one but I don't have forcedeth. There is a patch for it http://lkml.org/lkml/2007/7/18/506. > > Best Regards > Sasa Ostrouska Regards, Gabriel C - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
