On Mon, 06 Aug 2007 17:45:09 -0700, Kok, Auke wrote > [moving to netdev mailinglist] > Eric, > > please don't forget that an entire team here at Intel is > dedicated to supporting e100 and pro/1000 devices from Intel. > > Most of the pro/100 features are documented in the SDM which > contains some references to the eeprom parts. Mostly the > device doesn't need much configuration from the eeprom to work > (unlike gigE parts). The SDM can be downloaded from our sf.net > project page: > > http://sourceforge.net/project/showfiles.php?group_id=42302&package_id=68544 > > The issue that you are reporting: > > "My system boots fine but when I try to bring up the onboard > ethernet (an EEPro 100 VE) I get a "Nobody Cares" message and > the interrupt is disabled." > > However has been recently patched. This should have worked > regardless of whether you used e100 or eepro100 (noting that > nobody supports eepro100 anymore, you should really use e100 > for all tests). > > if you look in drivers/pci/quirks.c you'll find that there is > specific code for e100 devices. If this quirk doesn't work for > you then we'll need to dig into that. For this I'd like you to > gather: > > - `ethtool -e eth0` output > - `lspci -n` output > > this will allow me to check the quirck code and see if it has > the right device ID. I'm suspecting that the device ID is > missing somehow, or the workaround fails. > > Auke
Thanks for the help. Here are the lspci -n and ethtool -e outputs. I am attaching both the results for the 'bad' unit and for another one which is supposedly identical except for some battery charge circuitry. The eeprom data on the bad one may be a little odd due to my trying to make it match that of the good one, including that I forgot what the real MAC address was supposed to be. I can get one that I haven't screwed up if you need it, but it will probably take all day. -- "A hunch is creativity trying to tell you something" -- Frank Capra Eric Johnson
lspci_good.txt
Description: Binary data
lspci_bad.txt
Description: Binary data
ethtool_bad.txt
Description: Binary data
ethtool_good.txt
Description: Binary data
