From: Aurelien Jarno <[EMAIL PROTECTED]>
Fixes various things on the SSB
PCI core driver:
- Correctly write the configuration register value in
ssb_extpci_write_config() for len = 1 or len = 2.
- Set the PCI_LATENCY_TIMER to handle devices on the PCI bus.
- Set the PCI arbiter control to internal.
- Add some delay between the configuration of the PCI controller
and its registration.
Signed-off-by: Aurelien Jarno <[EMAIL PROTECTED]>
Signed-off-by: Michael Buesch <[EMAIL PROTECTED]>
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -99,6 +99,9 @@
/* Enable PCI bridge BAR1 prefetch and burst */
pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3);
+
+ /* Make sure our latency is high enough to handle the devices behind us
*/
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8);
}
DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge);
@@ -230,7 +233,7 @@
val = *((const u32 *)buf);
break;
}
- writel(*((const u32 *)buf), mmio);
+ writel(val, mmio);
err = 0;
unmap:
@@ -311,6 +314,8 @@
udelay(150); /* Assertion time demanded by the PCI standard */
val |= SSB_PCICORE_CTL_RST; /* Deassert RST# */
pcicore_write32(pc, SSB_PCICORE_CTL, val);
+ val = SSB_PCICORE_ARBCTL_INTERN;
+ pcicore_write32(pc, SSB_PCICORE_ARBCTL, val);
udelay(1); /* Assertion time demanded by the PCI standard */
/*TODO cardbus mode */
@@ -340,6 +345,9 @@
* The following needs change, if we want to port hostmode
* to non-MIPS platform. */
set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM,
0x04000000));
+ /* Give some time to the PCI controller to configure itself with the new
+ * values. Not waiting at this point causes crashes of the machine. */
+ mdelay(10);
register_pci_controller(&ssb_pcicore_controller);
}
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
