Add Documentation describing batching skb xmit capability.

Signed-off-by: Krishna Kumar <[EMAIL PROTECTED]>
---
 batching_skb_xmit.txt |   78 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 78 insertions(+)

diff -ruNp org/Documentation/networking/batching_skb_xmit.txt 
new/Documentation/networking/batching_skb_xmit.txt
--- org/Documentation/networking/batching_skb_xmit.txt  1970-01-01 
05:30:00.000000000 +0530
+++ new/Documentation/networking/batching_skb_xmit.txt  2007-08-22 
10:21:19.000000000 +0530
@@ -0,0 +1,78 @@
+                HOWTO for batching skb xmit support
+                -----------------------------------
+
+Section 1: What is batching skb xmit
+Section 2: How batching xmit works vs the regular xmit
+Section 3: How drivers can support batching
+Section 4: How users can work with batching
+
+
+Introduction: Kernel support for batching skb
+----------------------------------------------
+
+A new capability to support xmit of multiple skbs is provided in the netdevice
+layer. Drivers which enable this capability should be able to process multiple
+skbs in a single call to their xmit handler.
+
+
+Section 1: What is batching skb xmit
+-------------------------------------
+
+       This capability is optionally enabled by a driver by setting the
+       NETIF_F_BATCH_SKBS bit in dev->features. The pre-requisite for a
+       driver to use this capability is that it should have a reasonably
+       sized hardware queue that can process multiple skbs.
+
+
+Section 2: How batching xmit works vs the regular xmit
+-------------------------------------------------------
+
+       The network stack gets called from upper layer protocols with a single
+       skb to transmit. This skb is first enqueue'd and an attempt is made to
+       transmit it immediately (via qdisc_run). However, events like tx lock
+       contention, tx queue stopped, etc, can result in the skb not getting
+       sent out and it remains in the queue. When the next xmit is called or
+       when the queue is re-enabled, qdisc_run could potentially find
+       multiple packets in the queue, and iteratively send them all out
+       one-by-one.
+
+       Batching skb xmit is a mechanism to exploit this situation where all
+       skbs can be passed in one shot to the device. This reduces driver
+       processing, locking at the driver (or in stack for ~LLTX drivers)
+       gets amortized over multiple skbs, and in case of specific drivers
+       where every xmit results in a completion processing (like IPoIB) -
+       optimizations can be made in the driver to request a completion for
+       only the last skb that was sent which results in saving interrupts
+       for every (but the last) skb that was sent in the same batch.
+
+       Batching can result in significant performance gains for systems that
+       have multiple data stream paths over the same network interface card.
+
+
+Section 3: How drivers can support batching
+---------------------------------------------
+
+       Batching requires the driver to set the NETIF_F_BATCH_SKBS bit in
+       dev->features.
+
+       The driver's xmit handler should be modified to process multiple skbs
+       instead of one skb. The driver's xmit handler is called either with a
+       skb to transmit or NULL skb, where the latter case should be handled
+       as a call to xmit multiple skbs. This is done by sending out all skbs
+       in the dev->skb_blist list (where it was added by the core stack).
+
+
+Section 4: How users can work with batching
+---------------------------------------------
+
+       Batching can be disabled for a particular device, e.g. on desktop
+       systems if only one stream of network activity for that device is
+       taking place, since performance could be slightly affected due to
+       extra processing that batching adds (unless packets are getting
+       sent fast resulting in stopped queue's). Batching can be enabled if
+       more than one stream of network activity per device is being done,
+       e.g. on servers; or even desktop usage with multiple browser, chat,
+       file transfer sessions, etc.
+
+       Per device batching can be enabled/disabled by passing 'on' or 'off'
+       respectively to ethtool.
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to