When the ICMPv6 Target address is multicast, Linux processes the
redirect instead of dropping it. The problem is in this code in
ndisc_redirect_rcv():
if (ipv6_addr_equal(dest, target)) {
on_link = 1;
} else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
ND_PRINTK2(KERN_WARNING
"ICMPv6 Redirect: target address is not
link-local.\n");
return;
}
This second check will succeed if the Target address is, for example,
FF02::1 because it has link-local scope. Instead, it should be checking
if it's a unicast link-local address, as stated in RFC 2461/4861 Section
8.1:
- The ICMP Target Address is either a link-local address (when
redirected to a router) or the same as the ICMP Destination
Address (when redirected to the on-link destination).
I know this doesn't explicitly say unicast link-local address, but it's
implied.
This bug is preventing Linux kernels from achieving IPv6 Logo Phase II
certification because of a recent error that was found in the TAHI test
suite - Neighbor Disovery suite test 206 (v6LC.2.3.6_G) had the
multicast address in the Destination field instead of Target field, so
we were passing the test. This won't be the case anymore.
The patch below fixes this problem, and also fixes ndisc_send_redirect()
to not send an invalid redirect with a multicast address in the Target
field. I re-ran the TAHI Neighbor Discovery section to make sure Linux
passes all 245 tests now.
-Brian
Signed-off-by: Brian Haley <[EMAIL PROTECTED]>
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 74c4d8d..a0a6406 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -1267,7 +1267,8 @@ static void ndisc_redirect_rcv(struct sk_buff *skb)
if (ipv6_addr_equal(dest, target)) {
on_link = 1;
- } else if (!(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
+ } else if (ipv6_addr_type(target) !=
+ (IPV6_ADDR_UNICAST|IPV6_ADDR_LINKLOCAL)) {
ND_PRINTK2(KERN_WARNING
"ICMPv6 Redirect: target address is not link-local.\n");
return;
@@ -1343,7 +1344,7 @@ void ndisc_send_redirect(struct sk_buff *skb, struct neighbour *neigh,
}
if (!ipv6_addr_equal(&ipv6_hdr(skb)->daddr, target) &&
- !(ipv6_addr_type(target) & IPV6_ADDR_LINKLOCAL)) {
+ ipv6_addr_type(target) != (IPV6_ADDR_UNICAST|IPV6_ADDR_LINKLOCAL)) {
ND_PRINTK2(KERN_WARNING
"ICMPv6 Redirect: target address is not link-local.\n");
return;
