Hi,
I generated this patch for linux 2.6.24-rc5 and test it on AT91SAM9263
with iperf.
From: Gregory CLEMENT <[EMAIL PROTECTED]>
Date: Wed, 12 Dec 2007 18:10:14 +0100
Subject: [PATCH] MACB: clear transmit buffers properly on TX Underrun
Initially transmit buffer pointers were only reset. But buffer descriptors
were possibly still set as ready, and buffer in upper layer was not
freed. This caused driver hang under big load.
Now reset clean properly the buffer descriptor and freed upper layer.
Signed-off-by: Gregory CLEMENT <[EMAIL PROTECTED]>
---
drivers/net/macb.c | 26 +++++++++++++++++++++++++-
1 files changed, 25 insertions(+), 1 deletions(-)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 047ea7b..2ee1dab 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -307,9 +307,33 @@ static void macb_tx(struct macb *bp)
(unsigned long)status);
if (status & MACB_BIT(UND)) {
+ int i;
printk(KERN_ERR "%s: TX underrun, resetting buffers\n",
- bp->dev->name);
+ bp->dev->name);
+
+ head = bp->tx_head;
+
+ /* free transmit buffer in upper layer*/
+ for (tail = bp->tx_tail; tail != head; tail = NEXT_TX(tail)) {
+ struct ring_info *rp = &bp->tx_skb[tail];
+ struct sk_buff *skb = rp->skb;
+
+ BUG_ON(skb == NULL);
+
+ rmb();
+
+ dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len,
+ DMA_TO_DEVICE);
+ rp->skb = NULL;
+ dev_kfree_skb_irq(skb);
+ }
+
+ /*Mark all the buffer as used to avoid sending a lost buffer*/
+ for (i = 0; i < RX_RING_SIZE; i++)
+ bp->tx_ring[i].ctrl = MACB_BIT(TX_USED);
+
bp->tx_head = bp->tx_tail = 0;
+
}
if (!(status & MACB_BIT(COMP)))
--
1.5.3.7
--
Gregory CLEMENT
Adeneo
Adetel Group
2, chemin du Ruisseau
69134 ECULLY - FRANCE
Tél. : +33 (0)4 72 18 08 40 - Fax : +33 (0)4 72 18 08 41
www.adetelgroup.com
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
