Hi,
With AX25 patches applied I still get this possible circular locking
message.
Regards,
Bernard P.
=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.24 #3
-------------------------------------------------------
swapper/0 is trying to acquire lock:
(ax25_list_lock){-+..}, at: [<f91dd3b1>] ax25_destroy_socket+0x171/0x1f0 [ax25]
but task is already holding lock:
(slock-AF_AX25){-+..}, at: [<f91dbabc>] ax25_std_heartbeat_expiry+0x1c/0xe0
[ax25]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (slock-AF_AX25){-+..}:
[<c014c8ca>] __lock_acquire+0xc4a/0x10d0
[<c014cdd1>] lock_acquire+0x81/0xa0
[<c03280e2>] _spin_lock+0x32/0x60
[<f91dce3a>] ax25_info_show+0x24a/0x2c0 [ax25]
[<c01a4aa1>] seq_read+0xa1/0x2a0
[<c01c20fd>] proc_reg_read+0x5d/0x90
[<c018a41a>] vfs_read+0xaa/0x130
[<c018a8ed>] sys_read+0x3d/0x70
[<c01042ae>] sysenter_past_esp+0x5f/0xa5
[<ffffffff>] 0xffffffff
-> #0 (ax25_list_lock){-+..}:
[<c014c6f1>] __lock_acquire+0xa71/0x10d0
[<c014cdd1>] lock_acquire+0x81/0xa0
[<c0328143>] _spin_lock_bh+0x33/0x60
[<f91dd3b1>] ax25_destroy_socket+0x171/0x1f0 [ax25]
[<f91dbaf3>] ax25_std_heartbeat_expiry+0x53/0xe0 [ax25]
[<f91dc5ab>] ax25_heartbeat_expiry+0x1b/0x40 [ax25]
[<c01325dd>] run_timer_softirq+0x15d/0x1c0
[<c012e343>] __do_softirq+0x93/0x120
[<c012e427>] do_softirq+0x57/0x60
[<c012e868>] irq_exit+0x48/0x60
[<c0119b3b>] smp_apic_timer_interrupt+0x5b/0x90
[<c0104e27>] apic_timer_interrupt+0x33/0x38
[<c0102512>] mwait_idle+0x12/0x20
[<c0102631>] cpu_idle+0x71/0xc0
[<c0325549>] rest_init+0x49/0x50
[<c0427a9a>] start_kernel+0x2ea/0x370
[<00000000>] 0x0
[<ffffffff>] 0xffffffff
other info that might help us debug this:
1 lock held by swapper/0:
#0: (slock-AF_AX25){-+..}, at: [<f91dbabc>]
ax25_std_heartbeat_expiry+0x1c/0xe0 [ax25]
stack backtrace:
Pid: 0, comm: swapper Not tainted 2.6.24 #3
[<c01053da>] show_trace_log_lvl+0x1a/0x30
[<c0105e12>] show_trace+0x12/0x20
[<c01067cc>] dump_stack+0x6c/0x80
[<c014a32f>] print_circular_bug_tail+0x6f/0x80
[<c014c6f1>] __lock_acquire+0xa71/0x10d0
[<c014cdd1>] lock_acquire+0x81/0xa0
[<c0328143>] _spin_lock_bh+0x33/0x60
[<f91dd3b1>] ax25_destroy_socket+0x171/0x1f0 [ax25]
[<f91dbaf3>] ax25_std_heartbeat_expiry+0x53/0xe0 [ax25]
[<f91dc5ab>] ax25_heartbeat_expiry+0x1b/0x40 [ax25]
[<c01325dd>] run_timer_softirq+0x15d/0x1c0
[<c012e343>] __do_softirq+0x93/0x120
[<c012e427>] do_softirq+0x57/0x60
[<c012e868>] irq_exit+0x48/0x60
[<c0119b3b>] smp_apic_timer_interrupt+0x5b/0x90
[<c0104e27>] apic_timer_interrupt+0x33/0x38
[<c0102512>] mwait_idle+0x12/0x20
[<c0102631>] cpu_idle+0x71/0xc0
[<c0325549>] rest_init+0x49/0x50
[<c0427a9a>] start_kernel+0x2ea/0x370
[<00000000>] 0x0
=======================
