Bug fix for tsi108_eth network driver.
This patch fixes a problem with link recovery after connection was lost.
Signed-off-by: Alexandre Bounine <[EMAIL PROTECTED]>
---
diff -pNur linux-2.6.24/drivers/net/tsi108_eth.c
linux-2.6.24-fix/drivers/net/tsi108_eth.c
--- linux-2.6.24/drivers/net/tsi108_eth.c 2008-02-06 16:16:00.000000000
-0500
+++ linux-2.6.24-fix/drivers/net/tsi108_eth.c 2008-02-06
16:57:41.000000000 -0500
@@ -338,22 +338,21 @@ static void tsi108_check_phy(struct net_
TSI_WRITE(TSI108_MAC_CFG2, mac_cfg2_reg);
TSI_WRITE(TSI108_EC_PORTCTRL, portctrl_reg);
+ }
- if (data->link_up == 0) {
- /* The manual says it can take 3-4 usecs for
the speed change
- * to take effect.
- */
- udelay(5);
-
- spin_lock(&data->txlock);
- if (is_valid_ether_addr(dev->dev_addr) &&
data->txfree)
- netif_wake_queue(dev);
+ if (data->link_up == 0) {
+ /* The manual says it can take 3-4 usecs for the speed
change
+ * to take effect.
+ */
+ udelay(5);
- data->link_up = 1;
- spin_unlock(&data->txlock);
- }
- }
+ spin_lock(&data->txlock);
+ if (is_valid_ether_addr(dev->dev_addr) && data->txfree)
+ netif_wake_queue(dev);
+ data->link_up = 1;
+ spin_unlock(&data->txlock);
+ }
} else {
if (data->link_up == 1) {
netif_stop_queue(dev);
@@ -1267,12 +1266,11 @@ static void tsi108_init_phy(struct net_d
* PHY_STAT register before the link up status bit is set.
*/
- data->link_up = 1;
+ data->link_up = 0;
while (!((phyval = tsi108_read_mii(data, MII_BMSR)) &
BMSR_LSTATUS)) {
if (i++ > (MII_READ_DELAY / 10)) {
- data->link_up = 0;
break;
}
spin_unlock_irqrestore(&phy_lock, flags);
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
