As some C45 10G PHYs(e.g. Cortina CS4315/CS4340 PHY) have zero Devices In package, current driver can't get correct devices_in_package value by non-zero Devices In package. so let's probe more with zero Devices In package to support more C45 PHYs.
Signed-off-by: Shengzhou Liu <[email protected]> --- v3: restructure the loop to probe naturally. v2: use MDIO_DEVS1 and MDIO_DEVS2 instead of constant '6', '5' drivers/net/phy/phy_device.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index bdfe51f..3e90037 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -230,7 +230,7 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id, for (i = 1; i < num_ids && c45_ids->devices_in_package == 0; i++) { - reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS2; +retry: reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS2; phy_reg = mdiobus_read(bus, addr, reg_addr); if (phy_reg < 0) return -EIO; @@ -242,12 +242,20 @@ static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id, return -EIO; c45_ids->devices_in_package |= (phy_reg & 0xffff); - /* If mostly Fs, there is no device there, - * let's get out of here. - */ if ((c45_ids->devices_in_package & 0x1fffffff) == 0x1fffffff) { - *phy_id = 0xffffffff; - return 0; + if (i) { + /* If mostly Fs, there is no device there, + * then let's continue to probe more, as some + * 10G PHYs have zero Devices In package, + * e.g. Cortina CS4315/CS4340 PHY. + */ + i = 0; + goto retry; + } else { + /* no device there, let's get out of here */ + *phy_id = 0xffffffff; + return 0; + } } } -- 2.1.0.27.g96db324 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
