Hi Simon, On Fri, Sep 11, 2015 at 10:14 AM, Simon Horman <ho...@verge.net.au> wrote: >> > @@ -18,6 +21,9 @@ Required properties: >> > Optional properties: >> > - interrupt-parent: the phandle for the interrupt controller that services >> > interrupts for this device. >> > +- interrupt-names: One entry per interrupt named "ch%u". >> > + For the R8A7795 SoC this property is mandatory, >> > + and "ch0" through "ch24" are mandatory. >> >> This suggests the single multiplexed interrupt on R-Car Gen2 can be called >> "ch0". Is that what you want? I know the driver doesn't care. > > No, its not what I intended. > > I think its reasonable to allow the multiplexed interrupt to be named, > but to what I wonder. The documentation seems to call the interrupt > "EthernetAVB", which isn't very exciting.
Perhaps "mux", like I did for rspi, cfr. Documentation/devicetree/bindings/spi/spi-rspi.txt: - interrupts : A list of interrupt-specifiers, one for each entry in interrupt-names. If interrupt-names is not present, an interrupt specifier for a single muxed interrupt. - interrupt-names : A list of interrupt names. Should contain (if present): - "error" for SPEI, - "rx" for SPRI, - "tx" to SPTI, - "mux" for a single muxed interrupt. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- ge...@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html