Add additional error reporting to the generic DSA code, so it's easier
to debug when things go wrong. This was useful when initially bringing
up 88e6176 on a new board.
Signed-off-by: Russell King <rmk+ker...@arm.linux.org.uk>
---
net/dsa/dsa.c | 4 ++--
net/dsa/slave.c | 24 ++++++++++++++++--------
2 files changed, 18 insertions(+), 10 deletions(-)
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index c59fa5d9c22c..aa398bcef9e3 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -326,8 +326,8 @@ static int dsa_switch_setup_one(struct dsa_switch *ds,
struct device *parent)
ret = dsa_slave_create(ds, parent, i, pd->port_names[i]);
if (ret < 0) {
- netdev_err(dst->master_netdev, "[%d]: can't create dsa
slave device for port %d(%s)\n",
- index, i, pd->port_names[i]);
+ netdev_err(dst->master_netdev, "[%d]: can't create dsa
slave device for port %d(%s): %d\n",
+ index, i, pd->port_names[i], ret);
ret = 0;
}
}
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index cce97385f743..115a3fda36b3 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1010,8 +1010,10 @@ static int dsa_slave_phy_connect(struct dsa_slave_priv
*p,
struct dsa_switch *ds = p->parent;
p->phy = ds->slave_mii_bus->phy_map[addr];
- if (!p->phy)
+ if (!p->phy) {
+ netdev_err(slave_dev, "no phy at %d\n", addr);
return -ENODEV;
+ }
/* Use already configured phy mode */
if (p->phy_interface == PHY_INTERFACE_MODE_NA)
@@ -1045,7 +1047,7 @@ static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
*/
ret = of_phy_register_fixed_link(port_dn);
if (ret) {
- netdev_err(slave_dev, "failed to register fixed PHY\n");
+ netdev_err(slave_dev, "failed to register fixed PHY:
%d\n", ret);
return ret;
}
phy_is_fixed = true;
@@ -1056,17 +1058,20 @@ static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
phy_flags = ds->drv->get_phy_flags(ds, p->port);
if (phy_dn) {
- ret = of_mdio_parse_addr(&slave_dev->dev, phy_dn);
+ int phy_id = of_mdio_parse_addr(&slave_dev->dev, phy_dn);
+
/* If this PHY address is part of phys_mii_mask, which means
* that we need to divert reads and writes to/from it, then we
* want to bind this device using the slave MII bus created by
* DSA to make that happen.
*/
- if (!phy_is_fixed && ret >= 0 &&
- (ds->phys_mii_mask & (1 << ret))) {
- ret = dsa_slave_phy_connect(p, slave_dev, ret);
- if (ret)
+ if (!phy_is_fixed && phy_id >= 0 &&
+ (ds->phys_mii_mask & (1 << phy_id))) {
+ ret = dsa_slave_phy_connect(p, slave_dev, phy_id);
+ if (ret) {
+ netdev_err(slave_dev, "failed to connect to
phy%d: %d\n", phy_id, ret);
return ret;
+ }
} else {
p->phy = of_phy_connect(slave_dev, phy_dn,
dsa_slave_adjust_link,
@@ -1083,8 +1088,10 @@ static int dsa_slave_phy_setup(struct dsa_slave_priv *p,
*/
if (!p->phy) {
ret = dsa_slave_phy_connect(p, slave_dev, p->port);
- if (ret)
+ if (ret) {
+ netdev_err(slave_dev, "failed to connect to port %d:
%d\n", p->port, ret);
return ret;
+ }
} else {
netdev_info(slave_dev, "attached PHY at address %d [%s]\n",
p->phy->addr, p->phy->drv->name);
@@ -1195,6 +1202,7 @@ int dsa_slave_create(struct dsa_switch *ds, struct device
*parent,
ret = dsa_slave_phy_setup(p, slave_dev);
if (ret) {
+ netdev_err(master, "error %d setting up slave phy\n", ret);
free_netdev(slave_dev);
return ret;
}
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
