Initial support for VRF in IPv6 stack. Makes IPv6 functionality on par with IPv4 -- ping, tcp client/server and udp client/server all work fine. tcpdump on vrf device and external tap (e.g., host side tap device) shows all packets with proper addresses. IPv6 does not need the source address operation like IPv4. Verified vti6 works properly in my setup as does use of an IPv6 address on the VRF device.
David Ahern (4): net: Add IPv6 support to l3mdev net: Export fib6_get_table and nd_tbl net: Add IPv6 support to VRF device net: Add VRF support to IPv6 stack drivers/net/Kconfig | 1 + drivers/net/vrf.c | 254 +++++++++++++++++++++++++++++++++++++++++++++++++- include/net/l3mdev.h | 47 ++++++++++ net/ipv6/addrconf.c | 12 ++- net/ipv6/icmp.c | 6 +- net/ipv6/ip6_fib.c | 1 + net/ipv6/ip6_output.c | 6 +- net/ipv6/ndisc.c | 27 +++++- net/ipv6/route.c | 22 ++++- 9 files changed, 361 insertions(+), 15 deletions(-) -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
