From: Ido Schimmel <[email protected]> The meaning of certain parameters in the profile passed to the device during initialization has changed, so update their documentation accordingly.
Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> --- drivers/net/ethernet/mellanox/mlxsw/cmd.h | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/cmd.h b/drivers/net/ethernet/mellanox/mlxsw/cmd.h index 27e48b4..c7889f4 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/cmd.h +++ b/drivers/net/ethernet/mellanox/mlxsw/cmd.h @@ -570,7 +570,7 @@ MLXSW_ITEM32(cmd_mbox, config_profile, set_max_vlan_groups, 0x0C, 6, 1); */ MLXSW_ITEM32(cmd_mbox, config_profile, set_max_regions, 0x0C, 7, 1); -/* cmd_mbox_config_profile_set_fid_based +/* cmd_mbox_config_profile_set_flood_mode * Capability bit. Setting a bit to 1 configures the profile * according to the mailbox contents. */ @@ -651,12 +651,8 @@ MLXSW_ITEM32(cmd_mbox, config_profile, max_vlan_groups, 0x28, 0, 12); MLXSW_ITEM32(cmd_mbox, config_profile, max_regions, 0x2C, 0, 16); /* cmd_mbox_config_profile_max_flood_tables - * Maximum number of Flooding Tables. Flooding Tables are associated to - * the different packet types for the different switch partitions. - * Note that the table size depends on the fid_based mode. - * In SwitchX silicon, tables are split equally between the switch - * partitions. e.g. for 2 swids and 8 tables, the first 4 are associated - * with swid-1 and the last 4 are associated with swid-2. + * Maximum number of single-entry flooding tables. Different flooding tables + * can be associated with different packet types. */ MLXSW_ITEM32(cmd_mbox, config_profile, max_flood_tables, 0x30, 16, 4); @@ -667,12 +663,14 @@ MLXSW_ITEM32(cmd_mbox, config_profile, max_flood_tables, 0x30, 16, 4); */ MLXSW_ITEM32(cmd_mbox, config_profile, max_vid_flood_tables, 0x30, 8, 4); -/* cmd_mbox_config_profile_fid_based - * FID Based Flood Mode - * 00 Do not use FID to offset the index into the Port Group Table/Multicast ID - * 01 Use FID to offset the index to the Port Group Table (pgi) - * 10 Use FID to offset the index to the Port Group Table (pgi) and - * the Multicast ID +/* cmd_mbox_config_profile_flood_mode + * Flooding mode to use. + * 0-2 - Backward compatible modes for SwitchX devices. + * 3 - Mixed mode, where: + * max_flood_tables indicates the number of single-entry tables. + * max_vid_flood_tables indicates the number of per-VID tables. + * max_fid_offset_flood_tables indicates the number of FID-offset tables. + * max_fid_flood_tables indicates the number of per-FID tables. */ MLXSW_ITEM32(cmd_mbox, config_profile, flood_mode, 0x30, 0, 2); -- 1.9.3 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
