On Wed, 28 Oct 2015 11:14:14 +0000 Russell King - ARM Linux <[email protected]> wrote:
> On Wed, Oct 28, 2015 at 10:48:54AM +0100, David Jander wrote: > > > > Hi all, > > > > I was unable to figure out who's maintaining > > drivers/net/ethernet/freescale/fec_main.c, so I hope someone can help out > > on this list... > > > > We have a board with a RMII phy connected to an i.MX6S. The hardware seems > > to be ok, since I can receive and transmit ethernet frames without drops or > > errors. However only simple things like ping and dhcp seemed to work. > > TCP/IP connections could not be made. When looking at both ends with > > tcpdump, I realized that all transmitted packages arrived at the other end > > with the TCP and IP header checksums zeroed-out. > > > > After issuing the following command, TCP/IP started working correctly: > > > > $ ethtool --offload eth0 tx off > > > > This works around the issue. For some reason, when the FEC is in RMII > > mode, it isn't filling in the checksums. > > > > On another board with an RGMII phy the same kernel works fine without the > > need to disable offloading. What can possibly relate this functionality to > > the choice of MAC interface? > > You don't mention which kernel version you're using. There has been a bug > here with older kernels... Sorry, I somehow assumed it was obvious I'd report against latest mainline... I'm on 4.3-rc7. Best regards, -- David Jander Protonic Holland. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
