On 16/11/15 11:29, Adrian Chadd wrote: > hi, > > I'm debugging an issue on the Broadcom parts (using unimac-mdio.c as > the mdio bus) where i occasionally see MDIO bus read failures, which > causes phy.c to transition the PHY to PHY_HALTED. It stays in this > state until the link is bounced.
There is a known problem with some Broadcom PHYs where the first MDIO read may fail, and this can actually show up randomly in time, not just the first read and that caused the PHY library to enter PHY_HALTED. Which part are you seeing this? unimac-mdio.c has a reset hook just for that cases. > > So, what's the expectation to handle this and recover from it? is > there some userland piece monitoring things that I'm missing? There is not much you can do typically, but ignore or retry the read, or workaround it if you can, like what bcm7xxx.c does. -- Florian -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
