From: Alexander Duyck <[email protected]>
Enabling SR-IOV and then bringing the interface up was resulting in the PF
MAC addresses getting into a bad state. Specifically the MAC address was
enabled for both VF 0 and the PF. This resulted in some odd behaviors such
as VF 0 receiving a copy of the PFs traffic, which in turn enables the
ability for VF 0 to spoof the PF.
A workaround for this issue appears to be to bring up the interface first
and then enable SR-IOV as this way the reset is then triggered in the
existing code.
In order to correct this I have added a change to ixgbe_setup_tc where if
the interface is down we still will at least call ixgbe_reset so that the
MAC addresses for the device are reset to the correct pools.
Steps to reproduce issue:
modprobe ixgbe
echo 7 > /sys/bus/pci/devices/0000\:01\:00.1/sriov_numvfs
ifconfig enp1s0f1 up
ethregs -s 1:00.1 | grep MPSAR | grep -v 00000000
Result:
MPSAR[0] 00000081
MPSAR[254] 00000001
Expected Result, behavior after patch:
MPSAR[0] 00000080
MPSAR[254] 00000080
Signed-off-by: Alexander Duyck <[email protected]>
Tested-by: Darin Miller <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>
---
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 47395ff..aed8d02 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7920,6 +7920,9 @@ int ixgbe_setup_tc(struct net_device *dev, u8 tc)
*/
if (netif_running(dev))
ixgbe_close(dev);
+ else
+ ixgbe_reset(adapter);
+
ixgbe_clear_interrupt_scheme(adapter);
#ifdef CONFIG_IXGBE_DCB
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
