Add binding representing the Qualcomm wcn3620/60/80 WiFi block.
Signed-off-by: Bjorn Andersson <bjorn.anders...@sonymobile.com>
---
.../bindings/net/wireless/qcom,wcn36xx-wifi.txt | 76 ++++++++++++++++++++++
1 file changed, 76 insertions(+)
create mode 100644
Documentation/devicetree/bindings/net/wireless/qcom,wcn36xx-wifi.txt
diff --git
a/Documentation/devicetree/bindings/net/wireless/qcom,wcn36xx-wifi.txt
b/Documentation/devicetree/bindings/net/wireless/qcom,wcn36xx-wifi.txt
new file mode 100644
index 000000000000..7b314b9f30af
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,wcn36xx-wifi.txt
@@ -0,0 +1,76 @@
+Qualcomm WCN36xx WiFi Binding
+
+This binding describes the Qualcomm WCN36xx WiFi hardware. The hardware block
+is part of the Qualcomm WCNSS core, a WiFi/BT/FM combo chip, found in a variety
+of Qualcomm platforms.
+
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: must be one of:
+ "qcom,wcn3620-wlan",
+ "qcom,wcn3660-wlan",
+ "qcom,wcn3680-wlan"
+
+- qcom,smd-channel:
+ Usage: required
+ Value type: <string>
+ Definition: standard SMD property specifying the SMD channel used for
+ communication with the WiFi firmware
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the two IRQs for tx and rx respectively
+
+- qcom,wcnss-mmio:
+ Usage: required
+ Value type: <prop-encoed-array>
+ Definition: should specify base address and size of the WiFi related
+ registers of WCNSS
+
+- qcom,state:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: should specify the tx-enable and tx-ring-empty state
+ references
+
+- qcom,state-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: name of the states, must be "tx-enable", "tx-rings-empty";
+
+- local-mac-address:
+ Usage: optional
+ Value type: <prop-encoded-array> encoded as array of hex numbers
+ Definition: specifies MAC address that was assigned to the network
+ device described by the node containing this property.
+
+= EXAMPLE
+The following example represents a SMD node, with one edge representing the
+"pronto" subsystem, with the wcn3680 WiFi device described; as found on the
+8974 platform.
+
+smd {
+ compatible = "qcom,smd";
+
+ pronto {
+ interrupts = <0 142 1>;
+
+ qcom,ipc = <&apcs 8 17>;
+ qcom,smd-edge = <6>;
+
+ wifi {
+ compatible = "qcom,wcn3680-wlan";
+ qcom,smd-channels = "WLAN_CTRL";
+
+ interrupts = <0 145 0>, <0 146 0>;
+ interrupt-names = "tx", "rx";
+
+ qcom,wcnss-mmio = <0xfb000000 0x21b000>;
+
+ qcom,state = <&apps_smsm 10>, <&apps_smsm 9>;
+ qcom,state-names = "tx-enable", "tx-rings-empty";
+ };
+ };
+};
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
