On 2/9/2016 11:07 AM, Helmut Buchsbaum wrote:
Signed-off-by: Helmut Buchsbaum <helmut.buchsb...@gmail.com>
---
.../devicetree/bindings/net/micrel-ks8995.txt | 20
++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644
Documentation/devicetree/bindings/net/micrel-ks8995.txt
diff --git a/Documentation/devicetree/bindings/net/micrel-ks8995.txt
b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
new file mode 100644
index 0000000..7f11ca6
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/micrel-ks8995.txt
@@ -0,0 +1,20 @@
+Micrel KS8995 SPI controlled Ethernet Switch families
+
+Required properties (according to spi-bus.txt):
+- compatible: either "micrel,ks8995", "micrel,ksz8864" or
"micrel,ksz8795"
+
+Optional properties:
+- reset-gpios : phandle of gpio that will be used to reset chip
during probe
+
+Example:
+
+spi-master {
+ ...
+ ksz8795 {
ePAPR tells to name the nodes generically, according to their function.
+ compatible = "micrel,ksz8795";
+
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ reset-gpios = <&gpio0 46 1>;
+ };
+};
MBR, Sergei
Hello Sergei,
just to avoid any misunderstandings: you refer to ePAPR, ch. 2.2.1 Node Names.
"2.2.2, Generic Names Recommendation", actually. :-)
Your definitely right, I'll correct the naming in my example!
TIA.
Thanks,
Helmut
MBR, Sergei
