The PHY link state is not chaged in GENETv2 caused by the previous
commit 49f7a471e4d1 ("net: bcmgenet: Properly configure PHY to ignore
interrupt") was set to PHY_IGNORE_INTERRUPT in bcmgenet_mii_probe().
The internal PHY should use phy_mac_interrupt() when not in use
PHY_POLL. The statement for phy_mac_interrupt() has two conditions. The
first condition to check GENET_HAS_MDIO_INTR is not related PHY link
state, so this patch removes it.
Fixes: 49f7a471e4d1 ("net: bcmgenet: Properly configure PHY to ignore
interrupt")
Signed-off-by: Jaedon Shin <jaedon.s...@gmail.com>
---
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index b15a60d787c7..d7e01a74e927 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -2445,8 +2445,7 @@ static void bcmgenet_irq_task(struct work_struct *work)
}
/* Link UP/DOWN event */
- if ((priv->hw_params->flags & GENET_HAS_MDIO_INTR) &&
- (priv->irq0_stat & UMAC_IRQ_LINK_EVENT)) {
+ if (priv->irq0_stat & UMAC_IRQ_LINK_EVENT) {
phy_mac_interrupt(priv->phydev,
!!(priv->irq0_stat & UMAC_IRQ_LINK_UP));
priv->irq0_stat &= ~UMAC_IRQ_LINK_EVENT;
--
2.7.1
