Send netdisco-users mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/netdisco-users
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of netdisco-users digest..."
Today's Topics:
1. Re: Find nodes by vendor (using MAC address OUI)?
(Sckolnick, Gary)
2. Re: Find nodes by vendor (using MAC address OUI)? (Oliver Gorwits)
3. Re: Inventory items (Oliver Gorwits)
4. Inventory items (Bavo Seesink)
5. Inventory items (Bavo Seesink)
6. Re: Inventory items (Oliver Gorwits)
--- Begin Message ---
Hi Oliver,
Perfect! It works when we use the correct syntax -- 00:23:ae* -- and the Node
Vendor Inventory also works. (We're still learning the new UI.)
We did, however, encounter one issue. When viewing the Node Vendor Inventory
report and changing "Show 50 records" to "Show All records" we receive the
following error:
DataTables warning: table id=data-table - Ajax error. For more information
about this error, please see http://datatables.net/tn/7
Any ideas?
Also, on an unrelated note, are there instructions anywhere on the best way to
migrate our DB on ND1 to ND2 (or merge the two)? It'd be nice not to have to
recreate all of the user accounts and to also hold onto the historical data.
Thanks all you do.
Regards,
~Gary
-----Original Message-----
From: Oliver Gorwits [mailto:[email protected]]
Sent: Tuesday, December 23, 2014 10:22
To: [email protected]
Subject: Re: [Netdisco] Find nodes by vendor (using MAC address OUI)?
Hi Gary,
First of all, thanks for upgrading! It's rare that a Netdisco 1 feature doesn't
exist in Netdisco 2. (The main reason would be that the feature was already
broken or misguided in some way.)
On 2014-12-23 14:32, Sckolnick, Gary wrote:
> For example, on ND1 we
> can search Nodes for 0023ae and find all of the Dell devices on our
> network. The same search on ND2 returns "No matching records."
This should work fine but you'll need to give a little hint by specifying as a
wildcard search and with colons:
00:23:ae*
Alternatively if you already know the vendor name, use the built-in Node Vendor
Inventory report which is under the Reports -> Node menu.
I hope this helps, and do ask if you can't find anything else,
regards,
oliver.
> Our ND2 installation:
>
> Software Version
> App::Netdisco 2.029014
> DB Schema v39
> Dancer 1.3132
> Bootstrap 2.3.1
> PostgreSQL PostgreSQL 8.4.20 on x86_64-redhat-linux-gnu, compiled by
> GCC gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-4), 64-bit.
> DBI 1.631, DBD::Pg 2.15.1
> SNMP::Info 3.23
> Perl 5.010001
>
>
> Thank you,
> ________________________
> Gary Sckolnick
> Network Engineer
> Information Services
> (802) 847-2541
> [email protected]
> The University of Vermont Medical Center UVMHealth.org/MedCenter
>
>
>
> This message and any attachments may contain information that is
> confidential, privileged and/or protected from disclosure under state
> and federal laws. If you received this message in error or through
> inappropriate means, please reply to this message to notify the
> Sender
> that the message was received by you in error, and then permanently
> delete this message from all storage media, without forwarding or
> retaining a copy.
>
>
> ------------------------------------------------------------------------------
> Dive into the World of Parallel Programming! The Go Parallel Website,
> sponsored by Intel and developed in partnership with Slashdot Media,
> is your
> hub for all things parallel software development, from weekly thought
> leadership blogs to news, videos, case studies, tutorials and more.
> Take a
> look and join the conversation now. http://goparallel.sourceforge.net
> _______________________________________________
> Netdisco mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/netdisco-users
------------------------------------------------------------------------------
Dive into the World of Parallel Programming! The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net
_______________________________________________
Netdisco mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/netdisco-users
This message and any attachments may contain information that is confidential,
privileged and/or protected from disclosure under state and federal laws. If
you received this message in error or through inappropriate means, please reply
to this message to notify the Sender that the message was received by you in
error, and then permanently delete this message from all storage media, without
forwarding or retaining a copy.
--- End Message ---
--- Begin Message ---
Hi,
On 2014-12-23 15:37, Sckolnick, Gary wrote:
We did, however, encounter one issue. When viewing the Node Vendor
Inventory report and changing "Show 50 records" to "Show All records"
we receive the following error:
Oops, bug, I'll squash it in the next release. Thanks for reporting.
Also, on an unrelated note, are there instructions anywhere on the
best way to migrate our DB on ND1 to ND2 (or merge the two)? It'd be
nice not to have to recreate all of the user accounts and to also
hold
onto the historical data.
Rather than initialise a new database you can configure Netdisco 2 to
use your ND1 database (deployment.yml), then run the "netdisco-deploy"
step from the installation. This will upgrade the database to ND2.
Restart the daemons afterwards.
I recommend you do this on a copy of the database if you can, just in
case you still want to use the ND1 web interface. If you can't run a
copy, at least make sure you have a backup.
regards,
oliver.
--- End Message ---
--- Begin Message ---
Hi Bavo,
On 2014-12-23 06:24, Bavo Seesink wrote:
When i click on one
of the Cisco models (example 296024TT) it does not show all the
switches that has been discoverd of that type (I a clean install it
does work).
I'm not sure what you mean by this ... are you saying after a "clean
install" then all the switches are shown, but some time later they are
not?
None of the models shows switch names of any kind.
I'm also not sure what you mean by this. Are you able to provide some
screenshots?
regards,
oliver.
if i click on
"vendor" also no details. just an empty page with the normal page
colums. When i enter a switch name in the search bar on the top of
the
page it dow shows the switch name and details if i dubble enter it.
The search bar works fine. Does any one has encounter the same
problems?
I hope some one recognise this?
Thanks in advanced
Tech info system information:
BUILT USING OPEN SOURCE
SOFTWARE
VERSION
2.029014
DB SCHEMA [1]
V39
DANCER [2]
1.3132
BOOTSTRAP [3]
2.3.1
POSTGRESQL [4]
PostgreSQL 8.4.20 on x86_64-redhat-linux-gnu, compiled by GCC gcc
(GCC) 4.4.7 20120313 (Red Hat 4.4.7-4), 64-bit.
DBI 1.632, DBD::Pg 2.15.1
SNMP::INFO [5]
3.20
PERL [6]
5.010001
Links:
------
[1] https://metacpan.org/module/netdisco-db-deploy
[2] http://http://perldancer.org/
[3] http://getbootstrap.com
[4] http://www.postgresql.org
[5] http://snmp-info.sourceforge.net/
[6] http://www.perl.org
--- End Message ---
--- Begin Message ---
Hi Oliver,
In the beginning when the installation was done, i started to add devices. That
all went well. All the pages worked well. A few days later i needed to restart
the server due to OS updates. After the reload i started the postgresql deamon
with the frond-end and back-end demons of Netdisco. I noticed that after
logging-in that 2 things did not work properly. (Screenshots links provided via
Dropbox below the mail).
1) The welcome search-bar result ended up in a error page (Screenshots
Netdisco2.0 Shot 3 and Netdisco2.0 Shot 4)
The top search-bar right of the "Admin" dropdown works fine (great actually
:-).
2) When i click in the "Inventory" button it show me a page with all the types
of Cisco device it has discoverd. (Screenshot Netdisco2.0 Shot 1)
When i click on the device on top of the list "296024TT" it shows me the
following page (screenshot Netdisco2.0 Shot 2). That also happens
on all the items on the "Inventory" page. I also noticed that none of the
"Reports" functions works as well
(I`m not using the Report function that much).
The top search bar (as i already mention) works relay fine. I can put mac
addresses of all kind of formats, PC numers, you name it. ITs great :-)
If you need more information please let me know.
Thanks in advanced.
Greetings Palermo
--- End Message ---
--- Begin Message ---
Hi,
Sorry forgot to supply the screenshots links :-)
Netdisco2.0 Shot 1 :
(https://www.dropbox.com/s/fi3txkt41xis8vs/Netdisco2.0%20Shot%201.PNG?dl=0)
Netdisco2.0 Shot 2 :
(https://www.dropbox.com/s/ixxewmssl9n7mb5/Netdisco2.0%20Shot%202.PNG?dl=0)
Netdisco2.0 Shot 3 :
(https://www.dropbox.com/s/ai35d35d41qbx38/Netdisco2.0%20Shot%203.PNG?dl=0)
Netdisco2.0 Shot 4 :
(https://www.dropbox.com/s/84c6lxvgro9k3q6/Netdisco2.0%20Shot%204.PNG?dl=0)
Whole Folder :
(https://www.dropbox.com/s/ljf1772zqdizz5c/Netdisco%202.0.7z?dl=0)
--- End Message ---
--- Begin Message ---
Hi,
On 2014-12-24 07:11, Bavo Seesink wrote:
1) The welcome search-bar result ended up in a error page
(Screenshots
NETDISCO2.0 SHOT 3 and NETDISCO2.0 SHOT 4)
The top search-bar right of the "Admin" dropdown works fine (great
actually :-).
Ah, a misunderstanding here - the "welcome search-bar" is not a
search-bar. It's a form for discovering new devices (you enter the IP or
name of the device and a job is queued). However it shouldn't return an
error! This is a bug which I can reproduce so will be fixed in the next
release.
When i click on the device on top of the list "296024TT" it shows me
the following page (screenshot NETDISCO2.0 SHOT 2). That also happens
on all the items on the "Inventory" page. I also noticed that none
of
the "Reports" functions works as well
It seems there might be a problem with the Javascript libraries running
in your browser. It's tricky for me to debug this one. If you feel
confident, you could open the "Javascript Console" or web developer
toolbar in your browser and see if there's an error message. I assume
you're using the latest version of a modern browser?
regards,
oliver.
--- End Message ---
------------------------------------------------------------------------------
Dive into the World of Parallel Programming! The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net
_______________________________________________
Netdisco mailing list - Digest Mode
[email protected]
https://lists.sourceforge.net/lists/listinfo/netdisco-users
