Send netdisco-users mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/netdisco-users
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of netdisco-users digest..."
Today's Topics:
1. Extreme XOS nodes are in vlan 0 ([email protected])
2. Re: Extreme XOS nodes are in vlan 0 (Tom King)
3. Re: Extreme XOS nodes are in vlan 0 (Stewart Alexander)
4. Re: Extreme XOS nodes are in vlan 0 (Stewart Alexander)
--- Begin Message ---
Hello together,
I have a small problem With Extreme Switches.
The connected nodes stuck in vlan 0.
Does anyone have the same problem?
Thanks in advance
Best regards Dominik Müller
--- End Message ---
--- Begin Message ---
I have the same issue on my Extreme switches that are *not* running in stacked
mode – the native vlan shows as 0
For the switches where stacking is enabled, the native vlan displays correctly.
Tom
--
Tom King
Senior IT Officer
Department of Plant Sciences, University of Oxford
[email protected]<mailto:[email protected]>
01865 2 75090
From: "[email protected]" <[email protected]>
Date: Thursday, 1 August 2019 at 14:04
To: "[email protected]"
<[email protected]>
Subject: [Netdisco] Extreme XOS nodes are in vlan 0
Hello together,
I have a small problem With Extreme Switches.
The connected nodes stuck in vlan 0.
Does anyone have the same problem?
Thanks in advance
Best regards Dominik Müller
--- End Message ---
--- Begin Message ---
they don’t define VLAN 1 as a tag-less vlan … probably the traffic is
untagged (vlan 0 on extreme) you are using, I think there’s a way to set
the switch in a Cisco compatibility mode
See the online guides or call Extreme TAC for assistance
Otherwise force set your switch
>>> <[email protected]> 08/01/19 08:53 AM >>>
--- End Message ---
--- Begin Message ---
Yeah untagged packets by default go to vlan 0 on extreme, but I believe
there is a Cisco compatibly mode, check the online guides for info or
call Extreme TAC for assistance
>>> Tom King <[email protected]> 08/01/19 09:47 AM >>>I have the
same issue on my Extreme switches that are *not* running in stacked mode
– the native vlan shows as 0
For the switches where stacking is enabled, the native vlan displays
correctly.
Tom
--
Tom King
Senior IT Officer
Department of Plant Sciences, University of Oxford
[email protected]<mailto:[email protected]>
01865 2 75090
From: "[email protected]" <[email protected]>
Date: Thursday, 1 August 2019 at 14:04
To: "[email protected]"
<[email protected]>
Subject: [Netdisco] Extreme XOS nodes are in vlan 0
Hello together,
I have a small problem With Extreme Switches.
The connected nodes stuck in vlan 0.
Does anyone have the same problem?
Thanks in advance
Best regards Dominik Müller
--- End Message ---
_______________________________________________
Netdisco mailing list - Digest Mode
[email protected]
https://lists.sourceforge.net/lists/listinfo/netdisco-users
