Send netdisco-users mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/netdisco-users
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of netdisco-users digest..."
Today's Topics:
1. Cisco SGE2010: Setting VLAN and port description
(Mathias Schwenke)
2. Nodes not populating on Juniper gear (Charlie Butera)
3. Re: Nodes not populating on Juniper gear (Andy Ruhl)
--- Begin Message ---
Hi all.
Netdisco (2.44.4) recognizes my Cisco/Linksys SGE2010P correctly as "48-port 10/100/1000 Ethernet Switch with PoE". Netdisco shows the VLAN of the ports and the port status. I can enable and disable ports and I can enable and disable power (PoE). I see the configured VLANs.
Two questions:
- I try to set the VLAN of an access port by editing "Native VLAN" but this setting is not written to my switch. Why?
- Netdisco shows the interface name of the switch ports (for example g1, g2 etc.) in the column "name". Netdisco does not show the description of a port which I can set in the switch UI. When I change the port name in Netdisco, it writes it to the port description of the switch. So I lose the port descriptions in the switch and overwrite them by the interface names. How can I correct the mapping between "description" (switch) and "name" (netdisco)?
Best regards,
Mathias.
--- End Message ---
--- Begin Message ---
I am unable to see what switch port a mac address is connected to and I
believe it is related to the fact that none of my Juniper equipment is
populating node data.
The output from the SQL command *select * from node;* only shows data from
my Aruba/HPE equipment.
All devices in the network are being polled using SNMPv3.
SoftwareVersion
*App::Netdisco <http://netdisco.org/>*2.44.4
SNMP::Info <https://github.com/netdisco/snmp-info>3.70
DB Schema <https://metacpan.org/module/netdisco-db-deploy>61
PostgreSQL <http://www.postgresql.org/>10.00.3
Perl <http://www.perl.org/>5.16.3
Thank you,
Charlie
--- End Message ---
--- Begin Message ---
I always test by doing snmpbulkwalk from the same machine netdisco is
running on to make sure something is returned. Does that work? I've been
using juniper devices for years with netdisco with no problems.
Andy
On Fri, Jan 10, 2020, 4:17 PM Charlie Butera via netdisco-users <
[email protected]> wrote:
> I am unable to see what switch port a mac address is connected to and I
> believe it is related to the fact that none of my Juniper equipment is
> populating node data.
>
> The output from the SQL command *select * from node;* only shows data
> from my Aruba/HPE equipment.
> All devices in the network are being polled using SNMPv3.
>
> SoftwareVersion
> *App::Netdisco <http://netdisco.org/>*2.44.4
> SNMP::Info <https://github.com/netdisco/snmp-info>3.70
> DB Schema <https://metacpan.org/module/netdisco-db-deploy>61
> PostgreSQL <http://www.postgresql.org/>10.00.3
> Perl <http://www.perl.org/>5.16.3
>
> Thank you,
> Charlie
> _______________________________________________
> Netdisco mailing list
> [email protected]
> https://sourceforge.net/p/netdisco/mailman/netdisco-users/
--- End Message ---
_______________________________________________
Netdisco mailing list - Digest Mode
[email protected]
https://lists.sourceforge.net/lists/listinfo/netdisco-users
