Send netdisco-users mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/netdisco-users
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of netdisco-users digest..."
Today's Topics:
1. Re: Cisco SGE2010: Setting VLAN and port description
(Mathias Schwenke)
2. Re: Cisco SGE2010: Setting VLAN and port description
(Mathias Schwenke)
--- Begin Message ---
Hi Oliver.
Netdisco uses the SNMP Class “SNMP::Info::Layer2::CiscoSB”.
In the meantime I could test with other Cisco Small Business Series Switches:
The SG300 und SF302: They behave the same, Netdisco writes the port name to
“name” but writes it back to switch port description.
Mathias.
Von: Oliver Gorwits <[email protected]>
Gesendet: Sonntag, 12. Januar 2020 16:55
An: Mathias Schwenke <[email protected]>
Cc: [email protected]
Betreff: Re: [Netdisco] Cisco SGE2010: Setting VLAN and port description
Hi Mathias
This probably relates to the SMMP model used for your device. Across the
different models we need to map each field and it might be that the wrong map
is used.
What is the SNMP::Info Class used? You can see that in the device details tab.
Oliver.
On Fri, 10 Jan 2020 at 21:50, Mathias Schwenke <[email protected]
<mailto:[email protected]> > wrote:
Hi all.
Netdisco (2.44.4) recognizes my Cisco/Linksys SGE2010P correctly as "48-port
10/100/1000 Ethernet Switch with PoE". Netdisco shows the VLAN of the ports and
the port status. I can enable and disable ports and I can enable and disable
power (PoE). I see the configured VLANs.
Two questions:
- I try to set the VLAN of an access port by editing "Native VLAN" but this
setting is not written to my switch. Why?
- Netdisco shows the interface name of the switch ports (for example g1, g2
etc.) in the column "name". Netdisco does not show the description of a port
which I can set in the switch UI. When I change the port name in Netdisco, it
writes it to the port description of the switch. So I lose the port
descriptions in the switch and overwrite them by the interface names. How can I
correct the mapping between "description" (switch) and "name" (netdisco)?
Best regards,
Mathias.
_______________________________________________
Netdisco mailing list
[email protected]
<mailto:[email protected]>
https://sourceforge.net/p/netdisco/mailman/netdisco-users/
--- End Message ---
--- Begin Message ---
Hi.
I found an older post concerning the same problem:
https://sourceforge.net/p/netdisco/mailman/message/36318514/
In my case with my Cisco small business switches SNMP returns:
IF-MIB::ifAlias.49 = STRING: thisismyinterfacedescription
Netdisco seems to use this instead:
IF-MIB::ifName.49 = STRING: gi1
Mathias
Von: Oliver Gorwits <[email protected]>
Gesendet: Sonntag, 12. Januar 2020 16:55
An: Mathias Schwenke <[email protected]>
Cc: [email protected]
Betreff: Re: [Netdisco] Cisco SGE2010: Setting VLAN and port description
Hi Mathias
This probably relates to the SMMP model used for your device. Across the
different models we need to map each field and it might be that the wrong map
is used.
What is the SNMP::Info Class used? You can see that in the device details tab.
Oliver.
On Fri, 10 Jan 2020 at 21:50, Mathias Schwenke <mailto:[email protected]> wrote:
Hi all.
Netdisco (2.44.4) recognizes my Cisco/Linksys SGE2010P correctly as "48-port
10/100/1000 Ethernet Switch with PoE". Netdisco shows the VLAN of the ports and
the port status. I can enable and disable ports and I can enable and disable
power (PoE). I see the configured VLANs.
Two questions:
- I try to set the VLAN of an access port by editing "Native VLAN" but this
setting is not written to my switch. Why?
- Netdisco shows the interface name of the switch ports (for example g1, g2
etc.) in the column "name". Netdisco does not show the description of a port
which I can set in the switch UI. When I change the port name in Netdisco, it
writes it to the port description of the switch. So I lose the port
descriptions in the switch and overwrite them by the interface names. How can I
correct the mapping between "description" (switch) and "name" (netdisco)?
Best regards,
Mathias.
_______________________________________________
Netdisco mailing list
mailto:[email protected]
https://sourceforge.net/p/netdisco/mailman/netdisco-users/
--- End Message ---
_______________________________________________
Netdisco mailing list - Digest Mode
[email protected]
https://lists.sourceforge.net/lists/listinfo/netdisco-users
