--- Begin Message ---
Can you report back with your operating systems, please?
Many thanks,
On Tue, 4 Feb 2020 at 15:20, Ricardo Stella <[email protected]> wrote:
>
> Thanks - same issues here. A couple of errors during the last 24 hours
> since I restarted it as the queue was not doing anything over the weekend.
> These are just a few:
>
> Argument "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..."
> isn't numeric in int at /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line
> 1484, <__ANONIO__> line 25006.
> Argument "" isn't numeric in read at
> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439, <__ANONIO__> line 1.
> Sereal: Error: Bad Sereal header: Not a valid Sereal document. at offset 1
> of input at srl_decoder.c line 580 at
> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1445, <__ANONIO__> line 1.
> Argument "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..."
> isn't numeric in int at /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line
> 1484, <__ANONIO__> line 30713.
> Argument "" isn't numeric in read at
> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439, <__ANONIO__> line 1.
> Sereal: Error: Bad Sereal header: Not a valid Sereal document. at offset 1
> of input at srl_decoder.c line 580 at
> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1445, <__ANONIO__> line 1.
> Argument "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..."
> isn't numeric in int at /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line
> 1484, <__ANONIO__> line 48775.
> Argument "" isn't numeric in read at
> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439, <__ANONIO__> line 1.
> Sereal: Error: Bad Sereal header: Not a valid Sereal document. at offset 1
> of input at srl_decoder.c line 580 at
> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1445, <__ANONIO__> line 1.
> Argument "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..."
> isn't numeric in int at /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line
> 1484, <__ANONIO__> line 49491.
>
>
>
>
>
> On Tue, Feb 4, 2020 at 8:12 AM Oliver Gorwits <[email protected]> wrote:
>
>> Hi Marco
>>
>> I have emailed the developer of the MCE distribution to ask, as I think
>> this is outside of Netdisco's domain,
>>
>> regards
>> Oliver.
>>
>> On Tue, 4 Feb 2020 at 11:36, <[email protected]> wrote:
>>
>>> Hi Oliver
>>>
>>>
>>> It stop again after 4 days
>>>
>>> [14758] 2020-01-30 11:14:30 debug [172.17.121.2] arpnip - processed 0
>>> IPv6 Neighbor Cache entries
>>> [14758] 2020-01-30 11:14:30 info pol (3): wrapping up arpnip
>>> job(22433622) - status done at Thu Jan 30 12:14:30 2020
>>> Argument "PID_14758" isn't numeric in abs at
>>> /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm line 206, <__ANONIO__>
>>> line 128834.
>>> Can't call method "_mce_m_pending" on an undefined value at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 679, <__ANONIO__> line
>>> 128835.
>>> [14900] 2020-01-30 13:50:47 warn App::Netdisco 2.044004 backend
>>> [14900] 2020-01-30 13:50:47 info resolving backend hostname...
>>> *************
>>> [14904] 2020-02-03 19:13:41 info mgr (2): job 22463635 booked out for
>>> this processing node
>>> [14904] 2020-02-03 19:13:41 debug mgr (2): sleeping now...
>>> Argument "_12455" isn't numeric in read at
>>> /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm line 204, <__ANONIO__>
>>> line 476776.
>>> Argument "=<F3>rl^D\0A,{App::Netdisco::Backend::Job(*^Ok_statuslist@f..."
>>> isn't numeric in abs at /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm
>>> line 206, <__ANONIO__> line 476776.
>>> Sereal: Error: Bad Sereal header: Not a valid Sereal document. at offset
>>> 1 of input at srl_decoder.c line 580 at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 480, <__ANONIO__> line
>>> 476779.
>>> [12684] 2020-02-04 08:13:38 warn App::Netdisco 2.044004 backend
>>>
>>> It seems to occur randomly, but reading in the log I see that
>>> Argument "SOMETHING" isn't numeric in read at
>>> /home/netdisco/perl5/lib/perl5/MCE/Core/SOMETHING.pm
>>>
>>> occur sometimes but usually don't zombies netdisco-backend
>>>
>>> it stop after that sequence
>>> [14758] 2020-01-30 11:14:30 info pol (3): wrapping up arpnip
>>> job(22433622) - status done at Thu Jan 30 12:14:30 2020
>>> Argument "PID_14758" isn't numeric in abs at
>>> /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm line 206, <__ANONIO__>
>>> line 128834.
>>>
>>> [12455] 2020-02-03 19:13:41 info pol (3): wrapping up arpnip
>>> job(22463592) - status done at Mon Feb 3 20:13:41 2020
>>> ...
>>> Argument "_12455" isn't numeric in read at
>>> /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm line 204, <__ANONIO__>
>>> line 476776.
>>>
>>> just my two cents
>>>
>>> anyway can you suggest me how increase size of log?
>>> cause in debugging mode the 7 files isn't enough for 2 days
>>>
>>> Thank you all
>>> Marco
>>>
>>> > Il 30 gennaio 2020 alle 20.31 Oliver Gorwits <[email protected]> ha
>>> scritto:
>>> >
>>> > I was looking to see if the issue is related to an upstream library
>>> change, rather than in Netdisco.
>>> > Mainly because I'm scratching my head trying to work out what would
>>> cause this, and I can't yet reproduce it.
>>> > On Wed, 29 Jan 2020 at 16:00, Ricardo Stella < [email protected]>
>>> wrote:
>>> > > Almost there...
>>> > > [netdisco@netdisco ~]$ ~/bin/localenv perl -MSereal\ 999 -e 1
>>> > > Sereal version 999 required--this is only version 4.007.
>>> > > BEGIN failed--compilation aborted.
>>> > > [netdisco@netdisco ~]$ ~/bin/localenv perl -MMCE::Queue\ 999 -e 1
>>> > > MCE::Queue version 999 required--this is only version 1.865.
>>> > > BEGIN failed--compilation aborted.
>>> > > [netdisco@netdisco ~]$ ~/bin/localenv cpanm Sereal MCE
>>> > > Sereal is up to date. (4.007)
>>> > > MCE is up to date. (1.865)
>>> > >
>>> > > I assume we are trying to delete them and force download?
>>> > >
>>> > >
>>> > > On Wed, Jan 29, 2020 at 10:52 AM Oliver Gorwits < [email protected]>
>>> wrote:
>>> > > > Sorry, my apologies, yes you would need to add " ~/bin/localenv"
>>> to the start of all those commands, I believe
>>> > > >
>>> > > >
>>> > > > On Wed, 29 Jan 2020 at 15:17, Ricardo Stella < [email protected]>
>>> wrote:
>>> > > > > Running as the netdisco user, I'm getting:
>>> > > > > Can't locate Sereal.pm in @INC (@INC contains:
>>> /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl
>>> /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .).
>>> > > > > BEGIN failed--compilation aborted.
>>> > > > >
>>> > > > > Does it need --local-lib ~/perl5 or ~/bin/localenv first? And
>>> --notest?
>>> > > > >
>>> > > > >
>>> > > > > On Wed, Jan 29, 2020 at 9:47 AM Oliver Gorwits < [email protected]>
>>> wrote:
>>> > > > > > Hi Ricardo
>>> > > > > > Please can you also run:perl -MSereal\ 999 -e 1perl
>>> -MMCE::Queue\ 999 -e 1
>>> > > > > > Then runcpanm Sereal MCE
>>> > > > > > and then let us know if the problem is still there?
>>> > > > > > thanks,oliver.
>>> > > > > > On Wed, 29 Jan 2020 at 14:15, Ricardo Stella <
>>> [email protected]> wrote:
>>> > > > > > > Well, it's definitely a bug with the latest versions. I
>>> upgraded the original instance I had which was running fine under 2.040006
>>> since March of last year. This one also is exhibiting the same issues with
>>> jobs queued since 5:30pm yesterday.
>>> > > > > > > Error logs on that instance since last restart yesterday
>>> afternoon are:
>>> > > > > > > [7901] 2020-01-28 16:03:03 warn App::Netdisco 2.044011
>>> backend
>>> > > > > > > Argument "" isn't numeric in read at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439, <$__ANONIO__> line
>>> 1.
>>> > > > > > > Sereal: Error: Bad Sereal header: Not a valid Sereal
>>> document. at offset 1 of input at srl_decoder.c line 580 at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1445, <$__ANONIO__> line
>>> 1.
>>> > > > > > > Argument
>>> "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..." isn't numeric
>>> in int at /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1484,
>>> <$__ANONIO__> line 1753.
>>> > > > > > > Argument
>>> "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..." isn't numeric
>>> in int at /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1484,
>>> <$__ANONIO__> line 15984.
>>> > > > > > > Argument "" isn't numeric in read at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439, <$__ANONIO__> line
>>> 1.
>>> > > > > > > Can't call method "status" without a package or object
>>> reference at
>>> /home/netdisco/perl5/lib/perl5/App/Netdisco/Backend/Role/Poller.pm line 38,
>>> <$__ANONIO__> line 1.
>>> > > > > > > Argument "" isn't numeric in read at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439, <$__ANONIO__> line
>>> 1.
>>> > > > > > > Sereal: Error: Bad Sereal header: Not a valid Sereal
>>> document. at offset 1 of input at srl_decoder.c line 580 at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1445, <$__ANONIO__> line
>>> 1.
>>> > > > > > >
>>> > > > > > >
>>> > > > > > > On Tue, Jan 28, 2020 at 11:18 AM Ricardo Stella <
>>> [email protected]> wrote:
>>> > > > > > > > And just noticed that there's a newer version out there.
>>> Updated the new instance (including wiping the perl5 directory) and right
>>> after I started it, I got an error message. The old one was also updated
>>> but it's not giving me any errors so far.
>>> > > > > > > > [8849] 2020-01-28 16:13:41 warn App::Netdisco 2.044011
>>> backend
>>> > > > > > > > Argument "" isn't numeric in read at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439, line 1.
>>> > > > > > > > Sereal: Error: Bad Sereal header: Not a valid Sereal
>>> document. at offset 1 of input at srl_decoder.c line 580 at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1445, line 1.
>>> > > > > > > > Argument
>>> "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..." isn't numeric
>>> in int at /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1484, line 32.
>>> > > > > > > >
>>> > > > > > > >
>>> > > > > > > > On Tue, Jan 28, 2020 at 9:56 AM Ricardo Stella <
>>> [email protected]> wrote:
>>> > > > > > > > > Same here...
>>> > > > > > > > > backend status thinks it's running but jobs are queued
>>> since last night and not running. Here are the errors since last restart
>>> yesterday:
>>> > > > > > > > > [24657] 2020-01-27 16:00:58 warn App::Netdisco 2.044009
>>> backend
>>> > > > > > > > > Argument "" isn't numeric in read at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439, line 1.
>>> > > > > > > > > Sereal: Error: Bad Sereal header: Not a valid Sereal
>>> document. at offset 1 of input at srl_decoder.c line 580 at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1445, line 1.
>>> > > > > > > > > Argument "=M-srl^D\0A,n yesterday after few hour.
>>> > > > > > > > > ...
>>> > > > > > > > > [5754] 2020-01-27 17:06:59 debug -> run worker
>>> main/wirelessnodes/100
>>> > > > > > > > > [5754] 2020-01-27 17:06:59 info pol (3): wrapping
>>> up macsuck job(22425208) - status done at Mon Jan 27 18:06:59 2020
>>> > > > > > > > > [5750] 2020-01-27 17:06:59 debug [172.17.119.6]
>>> macsuck - port 1:43 vlan unknown : 1 nodes
>>> > > > > > > > > Argument "PID_5754" isn't numeric in abs at
>>> /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm line 206, line 32948.
>>> > > > > > > > > Can't call method "_mce_m_pending" on an undefined
>>> value at /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 679, line 32949.
>>> > > > > > > > >
>>> > > > > > > > > I activated debug, it seems that some scheduled jobs
>>> (macsuck, discoverall etc.) cause the error "Argument "PID_####" isn't
>>> numeric " and it zombies netdisco-backend child
>>> > > > > > > > > ps aux | grep netd
>>> > > > > > > > > netdisco 3428 0.0 0.3 22840 15848 ? S
>>> gen27 2:05 netdisco-backend
>>> > > > > > > > > netdisco 3429 0.0 0.0 0 0 ? Z
>>> gen27 0:15 [nd2: master]
>>> > > > > > > > >
>>> > > > > > > > > I can't say if it is caused by my new
>>> setup/configuration or something else
>>> > > > > > > > >
>>> > > > > > > > > Marco
>>> > > > > > > > >
>>> > > > > > > > > > Il 27 gennaio 2020 alle 17.03 Ricardo Stella <
>>> [email protected]> ha scritto:
>>> > > > > > > > > >
>>> > > > > > > > > >
>>> > > > > > > > > > Also happening here. I also had exported the DB in
>>> order to install on a new VM with new OS. Had a couple of problems that I
>>> posted but had this same error on the logs.
>>> > > > > > > > > > Noticed all jobs queued for a couple of days and
>>> nothing running.
>>> > > > > > > > > > Last message on logs was:
>>> > > > > > > > > > Argument "" isn't numeric in read at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439, line 1.
>>> > > > > > > > > > Sereal: Error: Bad Sereal header: Not a valid Sereal
>>> document. at offset 1 of input at srl_decoder.c line 580 at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1445, line 1.
>>> > > > > > > > > >
>>> > > > > > > > > > Restarting it seems to get the jobs running again.
>>> > > > > > > > > >
>>> > > > > > > > > >
>>> > > > > > > > > > On Mon, Jan 27, 2020 at 10:54 AM marco via
>>> netdisco-users < [email protected]> wrote:
>>> > > > > > > > > > > Hi there
>>> > > > > > > > > > >
>>> > > > > > > > > > > I had set up a new ND2 host on debian buster some
>>> weeks ago
>>> > > > > > > > > > > for experimental purpose
>>> > > > > > > > > > > I have another ND2 host up and running since years
>>> > > > > > > > > > >
>>> > > > > > > > > > > Software Version
>>> > > > > > > > > > > App::Netdisco 2.44.4
>>> > > > > > > > > > > SNMP::Info 3.70
>>> > > > > > > > > > > DB Schema 61
>>> > > > > > > > > > > PostgreSQL 12.00.1
>>> > > > > > > > > > > Perl 5.28.1
>>> > > > > > > > > > >
>>> > > > > > > > > > > I restore db from another ND2
>>> > > > > > > > > > > and copy deployment.yml
>>> > > > > > > > > > > It worked
>>> > > > > > > > > > >
>>> > > > > > > > > > > But I noticed that it stops running the scheduled
>>> jobs after some times (days)
>>> > > > > > > > > > > I had to restart netdisco-backend,
>>> > > > > > > > > > >
>>> > > > > > > > > > >
>>> > > > > > > > > > > here some info I collect
>>> > > > > > > > > > >
>>> > > > > > > > > > > from netdisco-backend.log
>>> > > > > > > > > > > ...
>>> > > > > > > > > > > [392] 2020-01-24 15:15:18 debug mgr (2): getting
>>> potential jobs for 1 workers
>>> > > > > > > > > > > [2700] 2020-01-24 15:15:18 debug
>>> [172.17.185.50] arpnip - processed 373 ARP Cache entries
>>> > > > > > > > > > > [2700] 2020-01-24 15:15:18 debug
>>> [172.17.185.50] arpnip - processed 0 IPv6 Neighbor Cache entries
>>> > > > > > > > > > > [2700] 2020-01-24 15:15:18 info pol (3):
>>> wrapping up arpnip job(22423168) - status done at Fri Jan 24 16:15:18 2020
>>> > > > > > > > > > > [392] 2020-01-24 15:15:18 debug getsome:
>>> cancelled 0E0 duplicate(s) of job 22423235
>>> > > > > > > > > > > [392] 2020-01-24 15:15:18 info mgr (2): job
>>> 22423235 booked out for this processing node
>>> > > > > > > > > > > Argument "PID_2700" isn't numeric in read at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 477, line 31470.
>>> > > > > > > > > > > Sereal: Error: Bad Sereal header: Not a valid
>>> Sereal document. at offset 1 of input at srl_decoder.c line 580 at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 480, line 31470.
>>> > > > > > > > > > >
>>> > > > > > > > > > > root@deb-netdisco:~# systemctl status
>>> netdisco-backend.service
>>> > > > > > > > > > > ● netdisco-backend.service - Netdisco Backend
>>> Service
>>> > > > > > > > > > > Loaded: loaded
>>> (/etc/systemd/system/netdisco-backend.service; enabled; vendor preset:
>>> enabled)
>>> > > > > > > > > > > Active: active (running) since Fri 2020-01-24
>>> 09:53:03 CET; 3 days ago
>>> > > > > > > > > > > Process: 110
>>> ExecStart=/home/netdisco/bin/netdisco-backend start (code=exited,
>>> status=0/SUCCESS)
>>> > > > > > > > > > > Main PID: 216 (netdisco-backen)
>>> > > > > > > > > > > Tasks: 2 (limit: 4915)
>>> > > > > > > > > > > Memory: 143.0M
>>> > > > > > > > > > > CGroup: /system.slice/netdisco-backend.service
>>> > > > > > > > > > > └─216 netdisco-backend
>>> > > > > > > > > > >
>>> > > > > > > > > > > gen 24 09:53:02 deb-netdisco systemd[1]:
>>> Starting Netdisco Backend Service...
>>> > > > > > > > > > > gen 24 09:53:03 deb-netdisco
>>> netdisco-backend[110]: Netdisco Backend
>>> [Started]
>>> > > > > > > > > > > gen 24 09:53:03 deb-netdisco
>>> netdisco-backend[110]: config watcher: watching /home/netdisco/environments
>>> for updates.
>>> > > > > > > > > > > gen 24 09:53:03 deb-netdisco systemd[1]: Started
>>> Netdisco Backend Service.
>>> > > > > > > > > > > gen 24 10:01:48 deb-netdisco
>>> netdisco-backend[110]: -- /home/netdisco/environments/deployment.yml
>>> updated.
>>> > > > > > > > > > > gen 24 10:01:48 deb-netdisco
>>> netdisco-backend[110]: config watcher: sending TERM to the server
>>> (pid:217)...
>>> > > > > > > > > > >
>>> > > > > > > > > > > root@deb-netdisco:~# ps aux | grep netd
>>> > > > > > > > > > > netdisco 216 0.0 0.3 22840 16008 ?
>>> S gen24 6:19 netdisco-backend
>>> > > > > > > > > > > netdisco 281 0.0 0.3 20744 13680 ?
>>> S gen24 0:00 perl /home/netdisco/bin/netdisco-web start
>>> > > > > > > > > > > netdisco 282 0.0 0.3 22152 16696 ?
>>> S gen24 0:47 starman master --disable-keepalive --user 1001 --group
>>> 1001 /home/netdisco/perl5/bin/netdisco-web-fg
>>> > > > > > > > > > > netdisco 372 0.0 0.0 0 0 ?
>>> Z gen24 0:16 [nd2: master]
>>> > > > > > > > > > > netdisco 373 0.0 2.7 135148 117200 ?
>>> S gen24 0:06 starman worker --disable-keepalive --user 1001 --group
>>> 1001 /home/netdisco/perl5/bin/netdisco-web-fg
>>> > > > > > > > > > > netdisco 374 0.0 2.8 136000 118000 ?
>>> S gen24 0:06 starman worker --disable-keepalive --user 1001 --group
>>> 1001 /home/netdisco/perl5/bin/netdisco-web-fg
>>> > > > > > > > > > > netdisco 375 0.0 2.7 133744 115940 ?
>>> S gen24 0:06 starman worker --disable-keepalive --user 1001 --group
>>> 1001 /home/netdisco/perl5/bin/netdisco-web-fg
>>> > > > > > > > > > > netdisco 376 0.0 2.8 137420 119504 ?
>>> S gen24 0:06 starman worker --disable-keepalive --user 1001 --group
>>> 1001 /home/netdisco/perl5/bin/netdisco-web-fg
>>> > > > > > > > > > > netdisco 377 0.0 2.7 133792 115996 ?
>>> S gen24 0:05 starman worker --disable-keepalive --user 1001 --group
>>> 1001 /home/netdisco/perl5/bin/netdisco-web-fg
>>> > > > > > > > > > > root 3405 0.0 0.0 6096 824 pts/0
>>> S+ 10:59 0:00 grep netd
>>> > > > > > > > > > >
>>> > > > > > > > > > >
>>> > > > > > > > > > > after stop and start
>>> > > > > > > > > > > root@deb-netdisco:~# systemctl start
>>> netdisco-backend.service
>>> > > > > > > > > > >
>>> > > > > > > > > > > it seems to work again
>>> > > > > > > > > > > [392] 2020-01-24 15:15:18 info mgr (2): job
>>> 22423235 booked out for this processing node
>>> > > > > > > > > > > Argument "PID_2700" isn't numeric in read at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 477, line 31470.
>>> > > > > > > > > > > Sereal: Error: Bad Sereal header: Not a valid
>>> Sereal document. at offset 1 of input at srl_decoder.c line 580 at
>>> /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 480, line 31470.
>>> > > > > > > > > > > [3429] 2020-01-27 10:10:08 warn App::Netdisco
>>> 2.044004 backend
>>> > > > > > > > > > > [3429] 2020-01-27 10:10:08 info resolving
>>> backend hostname...
>>> > > > > > > > > > > [3433] 2020-01-27 10:10:08 info applying role
>>> Scheduler to worker 1
>>> > > > > > > > > > > [3436] 2020-01-27 10:10:08 info applying role
>>> Poller to worker 4
>>> > > > > > > > > > > ...
>>> > > > > > > > > > >
>>> > > > > > > > > > >
>>> > > > > > > > > > > _______________________________________________
>>> > > > > > > > > > > Netdisco mailing list
>>> > > > > > > > > > > [email protected]
>>> > > > > > > > > > >
>>> https://sourceforge.net/p/netdisco/mailman/netdisco-users/
>>> > > > > > > > > >
>>> > > > > > > > > > --
>>> > > > > > > > > > °((( = (( ===°°° (((
>>> ================================================
>>> > > > > > > > >
>>> > > > > > > > >
>>> > > > > > > > > --
>>> > > > > > > > > °((( = (( ===°°° (((
>>> ================================================
>>> > > > > > > >
>>> > > > > > > > --
>>> > > > > > > > °((( = (( ===°°° (((
>>> ================================================
>>> > > > > > >
>>> > > > > > > --
>>> > > > > > > °((( = (( ===°°° (((
>>> ================================================
>>> > > > > > > _______________________________________________
>>> > > > > > > Netdisco mailing list
>>> > > > > > > [email protected]
>>> > > > > > > https://sourceforge.net/p/netdisco/mailman/netdisco-users/
>>> > > > >
>>> > > > > --
>>> > > > > °((( = (( ===°°° (((
>>> ================================================
>>> > >
>>> > > --
>>> > > °((( = (( ===°°° ((( ================================================
>>>
>>
>
> --
> °(((=((===°°°(((================================================
>
--- End Message ---
