--- Begin Message ---
2.44.14 is running with no error
thank you
Marco
> Il 12 febbraio 2020 alle 17.03 marco via netdisco-users
> <[email protected]> ha scritto:
>
>
> acc... I knew it :-)
>
>
> Marco
>
> > Il 12 febbraio 2020 alle 16.57 Oliver Gorwits <[email protected]> ha scritto:
> >
> > Ah, it usually updates that table overnight or if you run "bin/netdisco-do
> > stats" at the command line.
> > oliver.
> > On Wed, 12 Feb 2020 at 15:52, < [email protected]> wrote:
> > > Hi Oliver
> > >
> > >
> > > I upgrade as usual
> > > ~/bin/localenv cpanm --notest App::Netdisco
> > > ln -sf ~/perl5/bin/{localenv,netdisco-*} ~/bin/
> > >
> > > then stop and start both services
> > > systemctl start netdisco-backend.service
> > > systemctl start netdisco-web.service
> > >
> > > but in the home page under SystemInformation it show 2.44.13
> > >
> > > even if
> > > ~/bin/localenv cpanm --notest App::Netdisco
> > > App::Netdisco is up to date. (2.044014)
> > >
> > > Thank you
> > > Marco
> > >
> > >
> > > > Il 12 febbraio 2020 alle 14.08 Oliver Gorwits < [email protected]> ha
> > > > scritto:
> > > >
> > > > Hi Marco
> > > > Netdisco 2.44.14 is out though and that reverts the change and
> > > > implements a different bug fix. Please can you upgrade and try that ??
> > > > Perhaps there were two issues and we need to be sure.
> > > > thanks,oliver.
> > > > On Wed, 12 Feb 2020 at 12:58, marco via netdisco-users <
> > > > [email protected]> wrote:
> > > > > Hi Oliver
> > > > > 2.0440013 is still up and running with no issue.
> > > > > I'm going to disable debug, I consider this problem as solved.
> > > > > Thank you all
> > > > > By the way: I'm on Debian Buster.
> > > > >
> > > > > Marco
> > > > > > Il 10 febbraio 2020 alle 9.31 marco via netdisco-users <
> > > > > > [email protected]> ha scritto:
> > > > > >
> > > > > >
> > > > > > Hi Oliver
> > > > > > 2.0440013 is running, and netdisco-backend never stop (is
> > > > > > zombified) so far.
> > > > > > and error
> > > > > > Argument "SOMETHING" isn't numeric in read at
> > > > > > /home/netdisco/perl5/lib/perl5/MCE/Core/SOMETHING.pm
> > > > > > that I have seen in previus logs never occur
> > > > > >
> > > > > > I think to stay on 2.0440013 and observe
> > > > > > unless you suggest to go on 2.044014
> > > > > >
> > > > > > Thank you
> > > > > > Marco
> > > > > >
> > > > > > > Il 9 febbraio 2020 alle 11.04 Oliver Gorwits < [email protected]>
> > > > > > > ha scritto:
> > > > > > >
> > > > > > > Hello again
> > > > > > > The developer of MCE found a bug, so I have released Netdisco
> > > > > > > 2.044014 which will pull the new upstream MCE.
> > > > > > > Please would you try that and let us know how it goes?
> > > > > > > thanksOliver.
> > > > > > > On Thu, 6 Feb 2020 at 08:54, < [email protected]> wrote:
> > > > > > > > Hi Oliver
> > > > > > > >
> > > > > > > > 2.0440013 is running
> > > > > > > >
> > > > > > > > I'll inform you
> > > > > > > >
> > > > > > > > Thank you
> > > > > > > >
> > > > > > > > Marco
> > > > > > > >
> > > > > > > > > Il 4 febbraio 2020 alle 22.36 Oliver Gorwits <
> > > > > > > > > [email protected]> ha scritto:
> > > > > > > > >
> > > > > > > > > Hi,
> > > > > > > > > I have released Netdisco 2.044013 which uses a different
> > > > > > > > > configuration of the MCE job queue handler, on the advice of
> > > > > > > > > the MCE developer. This may or may not improve things (I've
> > > > > > > > > not been able to reproduce the bug), but it would be great if
> > > > > > > > > feedback comes soon, to let me know if this was a good move!
> > > > > > > > > many thanksOliver.
> > > > > > > > > On Tue, 4 Feb 2020 at 15:50, Ricardo Stella <
> > > > > > > > > [email protected]> wrote:
> > > > > > > > > > This is happening on Redhat 7.7 but also on the old
> > > > > > > > > > instance we were migrating out from which is running Redhat
> > > > > > > > > > 6.10.
> > > > > > > > > > On the older instance, we were running version 2.040006
> > > > > > > > > > since March 4 2019. I Started the migration to a new
> > > > > > > > > > instance (DB dump and import on new VM) around January 17th
> > > > > > > > > > this year.
> > > > > > > > > > On January 28, I upgraded the old instance to 2.044011 and
> > > > > > > > > > started to see the same problems as we are experiencing on
> > > > > > > > > > the new VM. The newer version of MCE:Queue is causing the
> > > > > > > > > > problems?
> > > > > > > > > > Hope this helps - Ricardo.
> > > > > > > > > > On Tue, Feb 4, 2020 at 10:33 AM Oliver Gorwits <
> > > > > > > > > > [email protected]> wrote:
> > > > > > > > > > > Can you report back with your operating systems, please?
> > > > > > > > > > > Many thanks,
> > > > > > > > > > > On Tue, 4 Feb 2020 at 15:20, Ricardo Stella <
> > > > > > > > > > > [email protected]> wrote:
> > > > > > > > > > > > Thanks - same issues here. A couple of errors during
> > > > > > > > > > > > the last 24 hours since I restarted it as the queue was
> > > > > > > > > > > > not doing anything over the weekend. These are just a
> > > > > > > > > > > > few:
> > > > > > > > > > > > Argument
> > > > > > > > > > > > "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..."
> > > > > > > > > > > > isn't numeric in int at
> > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1484,
> > > > > > > > > > > > line 25006.
> > > > > > > > > > > > Argument "" isn't numeric in read at
> > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439,
> > > > > > > > > > > > line 1.
> > > > > > > > > > > > Sereal: Error: Bad Sereal header: Not a valid Sereal
> > > > > > > > > > > > document. at offset 1 of input at srl_decoder.c line
> > > > > > > > > > > > 580 at /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line
> > > > > > > > > > > > 1445, line 1.
> > > > > > > > > > > > Argument
> > > > > > > > > > > > "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..."
> > > > > > > > > > > > isn't numeric in int at
> > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1484,
> > > > > > > > > > > > line 30713.
> > > > > > > > > > > > Argument "" isn't numeric in read at
> > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439,
> > > > > > > > > > > > line 1.
> > > > > > > > > > > > Sereal: Error: Bad Sereal header: Not a valid Sereal
> > > > > > > > > > > > document. at offset 1 of input at srl_decoder.c line
> > > > > > > > > > > > 580 at /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line
> > > > > > > > > > > > 1445, line 1.
> > > > > > > > > > > > Argument
> > > > > > > > > > > > "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..."
> > > > > > > > > > > > isn't numeric in int at
> > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1484,
> > > > > > > > > > > > line 48775.
> > > > > > > > > > > > Argument "" isn't numeric in read at
> > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1439,
> > > > > > > > > > > > line 1.
> > > > > > > > > > > > Sereal: Error: Bad Sereal header: Not a valid Sereal
> > > > > > > > > > > > document. at offset 1 of input at srl_decoder.c line
> > > > > > > > > > > > 580 at /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line
> > > > > > > > > > > > 1445, line 1.
> > > > > > > > > > > > Argument
> > > > > > > > > > > > "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..."
> > > > > > > > > > > > isn't numeric in int at
> > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line 1484,
> > > > > > > > > > > > line 49491.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > On Tue, Feb 4, 2020 at 8:12 AM Oliver Gorwits <
> > > > > > > > > > > > [email protected]> wrote:
> > > > > > > > > > > > > Hi Marco
> > > > > > > > > > > > > I have emailed the developer of the MCE distribution
> > > > > > > > > > > > > to ask, as I think this is outside of Netdisco's
> > > > > > > > > > > > > domain,
> > > > > > > > > > > > > regardsOliver.
> > > > > > > > > > > > > On Tue, 4 Feb 2020 at 11:36, < [email protected]>
> > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > > Hi Oliver
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > It stop again after 4 days
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > [14758] 2020-01-30 11:14:30 debug [172.17.121.2]
> > > > > > > > > > > > > > arpnip - processed 0 IPv6 Neighbor Cache entries
> > > > > > > > > > > > > > [14758] 2020-01-30 11:14:30 info pol (3): wrapping
> > > > > > > > > > > > > > up arpnip job(22433622) - status done at Thu Jan 30
> > > > > > > > > > > > > > 12:14:30 2020
> > > > > > > > > > > > > > Argument "PID_14758" isn't numeric in abs at
> > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm
> > > > > > > > > > > > > > line 206, line 128834.
> > > > > > > > > > > > > > Can't call method "_mce_m_pending" on an undefined
> > > > > > > > > > > > > > value at
> > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line
> > > > > > > > > > > > > > 679, line 128835.
> > > > > > > > > > > > > > [14900] 2020-01-30 13:50:47 warn App::Netdisco
> > > > > > > > > > > > > > 2.044004 backend
> > > > > > > > > > > > > > [14900] 2020-01-30 13:50:47 info resolving backend
> > > > > > > > > > > > > > hostname...
> > > > > > > > > > > > > > *************
> > > > > > > > > > > > > > [14904] 2020-02-03 19:13:41 info mgr (2): job
> > > > > > > > > > > > > > 22463635 booked out for this processing node
> > > > > > > > > > > > > > [14904] 2020-02-03 19:13:41 debug mgr (2): sleeping
> > > > > > > > > > > > > > now...
> > > > > > > > > > > > > > Argument "_12455" isn't numeric in read at
> > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm
> > > > > > > > > > > > > > line 204, line 476776.
> > > > > > > > > > > > > > Argument
> > > > > > > > > > > > > > "=rl^D\0A,{App::Netdisco::Backend::Job(*^Ok_statuslist@f..."
> > > > > > > > > > > > > > isn't numeric in abs at
> > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm
> > > > > > > > > > > > > > line 206, line 476776.
> > > > > > > > > > > > > > Sereal: Error: Bad Sereal header: Not a valid
> > > > > > > > > > > > > > Sereal document. at offset 1 of input at
> > > > > > > > > > > > > > srl_decoder.c line 580 at
> > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm line
> > > > > > > > > > > > > > 480, line
> > > > > > > > > > > > > > 476779.
> > > > > > > > > > > > > > [12684] 2020-02-04 08:13:38 warn App::Netdisco
> > > > > > > > > > > > > > 2.044004 backend
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > It seems to occur randomly, but reading in the log
> > > > > > > > > > > > > > I see that
> > > > > > > > > > > > > > Argument "SOMETHING" isn't numeric in read at
> > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Core/SOMETHING.pm
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > occur sometimes but usually don't zombies
> > > > > > > > > > > > > > netdisco-backend
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > it stop after that sequence
> > > > > > > > > > > > > > [14758] 2020-01-30 11:14:30 info pol (3): wrapping
> > > > > > > > > > > > > > up arpnip job(22433622) - status done at Thu Jan 30
> > > > > > > > > > > > > > 12:14:30 2020
> > > > > > > > > > > > > > Argument "PID_14758" isn't numeric in abs at
> > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm
> > > > > > > > > > > > > > line 206, line 128834.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > [12455] 2020-02-03 19:13:41 info pol (3): wrapping
> > > > > > > > > > > > > > up arpnip job(22463592) - status done at Mon Feb 3
> > > > > > > > > > > > > > 20:13:41 2020
> > > > > > > > > > > > > > ...
> > > > > > > > > > > > > > Argument "_12455" isn't numeric in read at
> > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm
> > > > > > > > > > > > > > line 204, line 476776.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > just my two cents
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > anyway can you suggest me how increase size of log?
> > > > > > > > > > > > > > cause in debugging mode the 7 files isn't enough
> > > > > > > > > > > > > > for 2 days
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Thank you all
> > > > > > > > > > > > > > Marco
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Il 30 gennaio 2020 alle 20.31 Oliver Gorwits <
> > > > > > > > > > > > > > > [email protected]> ha scritto:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > I was looking to see if the issue is related to
> > > > > > > > > > > > > > > an upstream library change, rather than in
> > > > > > > > > > > > > > > Netdisco.
> > > > > > > > > > > > > > > Mainly because I'm scratching my head trying to
> > > > > > > > > > > > > > > work out what would cause this, and I can't yet
> > > > > > > > > > > > > > > reproduce it.
> > > > > > > > > > > > > > > On Wed, 29 Jan 2020 at 16:00, Ricardo Stella <
> > > > > > > > > > > > > > > [email protected]> wrote:
> > > > > > > > > > > > > > > > Almost there...
> > > > > > > > > > > > > > > > [netdisco@netdisco ~]$ ~/bin/localenv perl
> > > > > > > > > > > > > > > > -MSereal\ 999 -e 1
> > > > > > > > > > > > > > > > Sereal version 999 required--this is only
> > > > > > > > > > > > > > > > version 4.007.
> > > > > > > > > > > > > > > > BEGIN failed--compilation aborted.
> > > > > > > > > > > > > > > > [netdisco@netdisco ~]$ ~/bin/localenv perl
> > > > > > > > > > > > > > > > -MMCE::Queue\ 999 -e 1
> > > > > > > > > > > > > > > > MCE::Queue version 999 required--this is only
> > > > > > > > > > > > > > > > version 1.865.
> > > > > > > > > > > > > > > > BEGIN failed--compilation aborted.
> > > > > > > > > > > > > > > > [netdisco@netdisco ~]$ ~/bin/localenv cpanm
> > > > > > > > > > > > > > > > Sereal MCE
> > > > > > > > > > > > > > > > Sereal is up to date. (4.007)
> > > > > > > > > > > > > > > > MCE is up to date. (1.865)
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > I assume we are trying to delete them and force
> > > > > > > > > > > > > > > > download?
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > On Wed, Jan 29, 2020 at 10:52 AM Oliver Gorwits
> > > > > > > > > > > > > > > > < [email protected]> wrote:
> > > > > > > > > > > > > > > > > Sorry, my apologies, yes you would need to
> > > > > > > > > > > > > > > > > add " ~/bin/localenv" to the start of all
> > > > > > > > > > > > > > > > > those commands, I believe
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > On Wed, 29 Jan 2020 at 15:17, Ricardo Stella
> > > > > > > > > > > > > > > > > < [email protected]> wrote:
> > > > > > > > > > > > > > > > > > Running as the netdisco user, I'm getting:
> > > > > > > > > > > > > > > > > > Can't locate Sereal.pm in @INC (@INC
> > > > > > > > > > > > > > > > > > contains: /usr/local/lib64/perl5
> > > > > > > > > > > > > > > > > > /usr/local/share/perl5
> > > > > > > > > > > > > > > > > > /usr/lib64/perl5/vendor_perl
> > > > > > > > > > > > > > > > > > /usr/share/perl5/vendor_perl
> > > > > > > > > > > > > > > > > > /usr/lib64/perl5 /usr/share/perl5 .).
> > > > > > > > > > > > > > > > > > BEGIN failed--compilation aborted.
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Does it need --local-lib ~/perl5 or
> > > > > > > > > > > > > > > > > > ~/bin/localenv first? And --notest?
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > On Wed, Jan 29, 2020 at 9:47 AM Oliver
> > > > > > > > > > > > > > > > > > Gorwits < [email protected]> wrote:
> > > > > > > > > > > > > > > > > > > Hi Ricardo
> > > > > > > > > > > > > > > > > > > Please can you also run:perl -MSereal\
> > > > > > > > > > > > > > > > > > > 999 -e 1perl -MMCE::Queue\ 999 -e 1
> > > > > > > > > > > > > > > > > > > Then runcpanm Sereal MCE
> > > > > > > > > > > > > > > > > > > and then let us know if the problem is
> > > > > > > > > > > > > > > > > > > still there?
> > > > > > > > > > > > > > > > > > > thanks,oliver.
> > > > > > > > > > > > > > > > > > > On Wed, 29 Jan 2020 at 14:15, Ricardo
> > > > > > > > > > > > > > > > > > > Stella < [email protected]> wrote:
> > > > > > > > > > > > > > > > > > > > Well, it's definitely a bug with the
> > > > > > > > > > > > > > > > > > > > latest versions. I upgraded the
> > > > > > > > > > > > > > > > > > > > original instance I had which was
> > > > > > > > > > > > > > > > > > > > running fine under 2.040006 since March
> > > > > > > > > > > > > > > > > > > > of last year. This one also is
> > > > > > > > > > > > > > > > > > > > exhibiting the same issues with jobs
> > > > > > > > > > > > > > > > > > > > queued since 5:30pm yesterday.
> > > > > > > > > > > > > > > > > > > > Error logs on that instance since last
> > > > > > > > > > > > > > > > > > > > restart yesterday afternoon are:
> > > > > > > > > > > > > > > > > > > > [7901] 2020-01-28 16:03:03 warn
> > > > > > > > > > > > > > > > > > > > App::Netdisco 2.044011 backend
> > > > > > > > > > > > > > > > > > > > Argument "" isn't numeric in read at
> > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > line 1439, <$__ANONIO__> line 1.
> > > > > > > > > > > > > > > > > > > > Sereal: Error: Bad Sereal header: Not a
> > > > > > > > > > > > > > > > > > > > valid Sereal document. at offset 1 of
> > > > > > > > > > > > > > > > > > > > input at srl_decoder.c line 580 at
> > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > line 1445, <$__ANONIO__> line 1.
> > > > > > > > > > > > > > > > > > > > Argument
> > > > > > > > > > > > > > > > > > > > "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..."
> > > > > > > > > > > > > > > > > > > > isn't numeric in int at
> > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > line 1484, <$__ANONIO__> line 1753.
> > > > > > > > > > > > > > > > > > > > Argument
> > > > > > > > > > > > > > > > > > > > "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..."
> > > > > > > > > > > > > > > > > > > > isn't numeric in int at
> > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > line 1484, <$__ANONIO__> line 15984.
> > > > > > > > > > > > > > > > > > > > Argument "" isn't numeric in read at
> > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > line 1439, <$__ANONIO__> line 1.
> > > > > > > > > > > > > > > > > > > > Can't call method "status" without a
> > > > > > > > > > > > > > > > > > > > package or object reference at
> > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/App/Netdisco/Backend/Role/Poller.pm
> > > > > > > > > > > > > > > > > > > > line 38, <$__ANONIO__> line 1.
> > > > > > > > > > > > > > > > > > > > Argument "" isn't numeric in read at
> > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > line 1439, <$__ANONIO__> line 1.
> > > > > > > > > > > > > > > > > > > > Sereal: Error: Bad Sereal header: Not a
> > > > > > > > > > > > > > > > > > > > valid Sereal document. at offset 1 of
> > > > > > > > > > > > > > > > > > > > input at srl_decoder.c line 580 at
> > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > line 1445, <$__ANONIO__> line 1.
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > On Tue, Jan 28, 2020 at 11:18 AM
> > > > > > > > > > > > > > > > > > > > Ricardo Stella < [email protected]>
> > > > > > > > > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > > > > > > > > > And just noticed that there's a newer
> > > > > > > > > > > > > > > > > > > > > version out there. Updated the new
> > > > > > > > > > > > > > > > > > > > > instance (including wiping the perl5
> > > > > > > > > > > > > > > > > > > > > directory) and right after I started
> > > > > > > > > > > > > > > > > > > > > it, I got an error message. The old
> > > > > > > > > > > > > > > > > > > > > one was also updated but it's not
> > > > > > > > > > > > > > > > > > > > > giving me any errors so far.
> > > > > > > > > > > > > > > > > > > > > [8849] 2020-01-28 16:13:41 warn
> > > > > > > > > > > > > > > > > > > > > App::Netdisco 2.044011 backend
> > > > > > > > > > > > > > > > > > > > > Argument "" isn't numeric in read at
> > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > line 1439, line 1.
> > > > > > > > > > > > > > > > > > > > > Sereal: Error: Bad Sereal header: Not
> > > > > > > > > > > > > > > > > > > > > a valid Sereal document. at offset 1
> > > > > > > > > > > > > > > > > > > > > of input at srl_decoder.c line 580 at
> > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > line 1445, line 1.
> > > > > > > > > > > > > > > > > > > > > Argument
> > > > > > > > > > > > > > > > > > > > > "=M-srl^D\0A,{App::Netdisco::Backend::Job(*^Ofstatusfqueu..."
> > > > > > > > > > > > > > > > > > > > > isn't numeric in int at
> > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > line 1484, line 32.
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > On Tue, Jan 28, 2020 at 9:56 AM
> > > > > > > > > > > > > > > > > > > > > Ricardo Stella < [email protected]>
> > > > > > > > > > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > > > > > > > > > > Same here...
> > > > > > > > > > > > > > > > > > > > > > backend status thinks it's running
> > > > > > > > > > > > > > > > > > > > > > but jobs are queued since last
> > > > > > > > > > > > > > > > > > > > > > night and not running. Here are the
> > > > > > > > > > > > > > > > > > > > > > errors since last restart
> > > > > > > > > > > > > > > > > > > > > > yesterday:
> > > > > > > > > > > > > > > > > > > > > > [24657] 2020-01-27 16:00:58 warn
> > > > > > > > > > > > > > > > > > > > > > App::Netdisco 2.044009 backend
> > > > > > > > > > > > > > > > > > > > > > Argument "" isn't numeric in read
> > > > > > > > > > > > > > > > > > > > > > at
> > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > > line 1439, line 1.
> > > > > > > > > > > > > > > > > > > > > > Sereal: Error: Bad Sereal header:
> > > > > > > > > > > > > > > > > > > > > > Not a valid Sereal document. at
> > > > > > > > > > > > > > > > > > > > > > offset 1 of input at srl_decoder.c
> > > > > > > > > > > > > > > > > > > > > > line 580 at
> > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > > line 1445, line 1.
> > > > > > > > > > > > > > > > > > > > > > Argument "=M-srl^D\0A,n yesterday
> > > > > > > > > > > > > > > > > > > > > > after few hour.
> > > > > > > > > > > > > > > > > > > > > > ...
> > > > > > > > > > > > > > > > > > > > > > [5754] 2020-01-27 17:06:59
> > > > > > > > > > > > > > > > > > > > > > debug -> run worker
> > > > > > > > > > > > > > > > > > > > > > main/wirelessnodes/100
> > > > > > > > > > > > > > > > > > > > > > [5754] 2020-01-27 17:06:59
> > > > > > > > > > > > > > > > > > > > > > info pol (3): wrapping up macsuck
> > > > > > > > > > > > > > > > > > > > > > job(22425208) - status done at Mon
> > > > > > > > > > > > > > > > > > > > > > Jan 27 18:06:59 2020
> > > > > > > > > > > > > > > > > > > > > > [5750] 2020-01-27 17:06:59
> > > > > > > > > > > > > > > > > > > > > > debug [172.17.119.6] macsuck -
> > > > > > > > > > > > > > > > > > > > > > port 1:43 vlan unknown : 1 nodes
> > > > > > > > > > > > > > > > > > > > > > Argument "PID_5754" isn't
> > > > > > > > > > > > > > > > > > > > > > numeric in abs at
> > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Core/Manager.pm
> > > > > > > > > > > > > > > > > > > > > > line 206, line 32948.
> > > > > > > > > > > > > > > > > > > > > > Can't call method
> > > > > > > > > > > > > > > > > > > > > > "_mce_m_pending" on an undefined
> > > > > > > > > > > > > > > > > > > > > > value at
> > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > > line 679, line 32949.
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > I activated debug, it seems that
> > > > > > > > > > > > > > > > > > > > > > some scheduled jobs (macsuck,
> > > > > > > > > > > > > > > > > > > > > > discoverall etc.) cause the error
> > > > > > > > > > > > > > > > > > > > > > "Argument "PID_####" isn't numeric
> > > > > > > > > > > > > > > > > > > > > > " and it zombies netdisco-backend
> > > > > > > > > > > > > > > > > > > > > > child
> > > > > > > > > > > > > > > > > > > > > > ps aux | grep netd
> > > > > > > > > > > > > > > > > > > > > > netdisco 3428 0.0 0.3 22840
> > > > > > > > > > > > > > > > > > > > > > 15848 ? S gen27 2:05
> > > > > > > > > > > > > > > > > > > > > > netdisco-backend
> > > > > > > > > > > > > > > > > > > > > > netdisco 3429 0.0 0.0 0
> > > > > > > > > > > > > > > > > > > > > > 0 ? Z gen27 0:15
> > > > > > > > > > > > > > > > > > > > > > [nd2: master]
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > I can't say if it is caused by my
> > > > > > > > > > > > > > > > > > > > > > new setup/configuration or
> > > > > > > > > > > > > > > > > > > > > > something else
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > Marco
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > Il 27 gennaio 2020 alle 17.03
> > > > > > > > > > > > > > > > > > > > > > > Ricardo Stella <
> > > > > > > > > > > > > > > > > > > > > > > [email protected]> ha scritto:
> > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > Also happening here. I also had
> > > > > > > > > > > > > > > > > > > > > > > exported the DB in order to
> > > > > > > > > > > > > > > > > > > > > > > install on a new VM with new OS.
> > > > > > > > > > > > > > > > > > > > > > > Had a couple of problems that I
> > > > > > > > > > > > > > > > > > > > > > > posted but had this same error on
> > > > > > > > > > > > > > > > > > > > > > > the logs.
> > > > > > > > > > > > > > > > > > > > > > > Noticed all jobs queued for a
> > > > > > > > > > > > > > > > > > > > > > > couple of days and nothing
> > > > > > > > > > > > > > > > > > > > > > > running.
> > > > > > > > > > > > > > > > > > > > > > > Last message on logs was:
> > > > > > > > > > > > > > > > > > > > > > > Argument "" isn't numeric in read
> > > > > > > > > > > > > > > > > > > > > > > at
> > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > > > line 1439, line 1.
> > > > > > > > > > > > > > > > > > > > > > > Sereal: Error: Bad Sereal header:
> > > > > > > > > > > > > > > > > > > > > > > Not a valid Sereal document. at
> > > > > > > > > > > > > > > > > > > > > > > offset 1 of input at
> > > > > > > > > > > > > > > > > > > > > > > srl_decoder.c line 580 at
> > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > > > line 1445, line 1.
> > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > Restarting it seems to get the
> > > > > > > > > > > > > > > > > > > > > > > jobs running again.
> > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > On Mon, Jan 27, 2020 at 10:54 AM
> > > > > > > > > > > > > > > > > > > > > > > marco via netdisco-users <
> > > > > > > > > > > > > > > > > > > > > > > [email protected]>
> > > > > > > > > > > > > > > > > > > > > > > wrote:
> > > > > > > > > > > > > > > > > > > > > > > > Hi there
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > I had set up a new ND2 host on
> > > > > > > > > > > > > > > > > > > > > > > > debian buster some weeks ago
> > > > > > > > > > > > > > > > > > > > > > > > for experimental purpose
> > > > > > > > > > > > > > > > > > > > > > > > I have another ND2 host up and
> > > > > > > > > > > > > > > > > > > > > > > > running since years
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > Software Version
> > > > > > > > > > > > > > > > > > > > > > > > App::Netdisco 2.44.4
> > > > > > > > > > > > > > > > > > > > > > > > SNMP::Info 3.70
> > > > > > > > > > > > > > > > > > > > > > > > DB Schema 61
> > > > > > > > > > > > > > > > > > > > > > > > PostgreSQL 12.00.1
> > > > > > > > > > > > > > > > > > > > > > > > Perl 5.28.1
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > I restore db from another ND2
> > > > > > > > > > > > > > > > > > > > > > > > and copy deployment.yml
> > > > > > > > > > > > > > > > > > > > > > > > It worked
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > But I noticed that it stops
> > > > > > > > > > > > > > > > > > > > > > > > running the scheduled jobs
> > > > > > > > > > > > > > > > > > > > > > > > after some times (days)
> > > > > > > > > > > > > > > > > > > > > > > > I had to restart
> > > > > > > > > > > > > > > > > > > > > > > > netdisco-backend,
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > here some info I collect
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > from netdisco-backend.log
> > > > > > > > > > > > > > > > > > > > > > > > ...
> > > > > > > > > > > > > > > > > > > > > > > > [392] 2020-01-24 15:15:18
> > > > > > > > > > > > > > > > > > > > > > > > debug mgr (2): getting
> > > > > > > > > > > > > > > > > > > > > > > > potential jobs for 1 workers
> > > > > > > > > > > > > > > > > > > > > > > > [2700] 2020-01-24 15:15:18
> > > > > > > > > > > > > > > > > > > > > > > > debug [172.17.185.50] arpnip -
> > > > > > > > > > > > > > > > > > > > > > > > processed 373 ARP Cache entries
> > > > > > > > > > > > > > > > > > > > > > > > [2700] 2020-01-24 15:15:18
> > > > > > > > > > > > > > > > > > > > > > > > debug [172.17.185.50] arpnip -
> > > > > > > > > > > > > > > > > > > > > > > > processed 0 IPv6 Neighbor Cache
> > > > > > > > > > > > > > > > > > > > > > > > entries
> > > > > > > > > > > > > > > > > > > > > > > > [2700] 2020-01-24 15:15:18
> > > > > > > > > > > > > > > > > > > > > > > > info pol (3): wrapping up
> > > > > > > > > > > > > > > > > > > > > > > > arpnip job(22423168) - status
> > > > > > > > > > > > > > > > > > > > > > > > done at Fri Jan 24 16:15:18
> > > > > > > > > > > > > > > > > > > > > > > > 2020
> > > > > > > > > > > > > > > > > > > > > > > > [392] 2020-01-24 15:15:18
> > > > > > > > > > > > > > > > > > > > > > > > debug getsome: cancelled 0E0
> > > > > > > > > > > > > > > > > > > > > > > > duplicate(s) of job 22423235
> > > > > > > > > > > > > > > > > > > > > > > > [392] 2020-01-24 15:15:18
> > > > > > > > > > > > > > > > > > > > > > > > info mgr (2): job 22423235
> > > > > > > > > > > > > > > > > > > > > > > > booked out for this processing
> > > > > > > > > > > > > > > > > > > > > > > > node
> > > > > > > > > > > > > > > > > > > > > > > > Argument "PID_2700" isn't
> > > > > > > > > > > > > > > > > > > > > > > > numeric in read at
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > > > > line 477, line 31470.
> > > > > > > > > > > > > > > > > > > > > > > > Sereal: Error: Bad Sereal
> > > > > > > > > > > > > > > > > > > > > > > > header: Not a valid Sereal
> > > > > > > > > > > > > > > > > > > > > > > > document. at offset 1 of input
> > > > > > > > > > > > > > > > > > > > > > > > at srl_decoder.c line 580 at
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > > > > line 480, line 31470.
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > root@deb-netdisco:~#
> > > > > > > > > > > > > > > > > > > > > > > > systemctl status
> > > > > > > > > > > > > > > > > > > > > > > > netdisco-backend.service
> > > > > > > > > > > > > > > > > > > > > > > > ● netdisco-backend.service
> > > > > > > > > > > > > > > > > > > > > > > > - Netdisco Backend Service
> > > > > > > > > > > > > > > > > > > > > > > > Loaded: loaded
> > > > > > > > > > > > > > > > > > > > > > > > (/etc/systemd/system/netdisco-backend.service;
> > > > > > > > > > > > > > > > > > > > > > > > enabled; vendor preset:
> > > > > > > > > > > > > > > > > > > > > > > > enabled)
> > > > > > > > > > > > > > > > > > > > > > > > Active: active (running)
> > > > > > > > > > > > > > > > > > > > > > > > since Fri 2020-01-24 09:53:03
> > > > > > > > > > > > > > > > > > > > > > > > CET; 3 days ago
> > > > > > > > > > > > > > > > > > > > > > > > Process: 110
> > > > > > > > > > > > > > > > > > > > > > > > ExecStart=/home/netdisco/bin/netdisco-backend
> > > > > > > > > > > > > > > > > > > > > > > > start (code=exited,
> > > > > > > > > > > > > > > > > > > > > > > > status=0/SUCCESS)
> > > > > > > > > > > > > > > > > > > > > > > > Main PID: 216
> > > > > > > > > > > > > > > > > > > > > > > > (netdisco-backen)
> > > > > > > > > > > > > > > > > > > > > > > > Tasks: 2 (limit: 4915)
> > > > > > > > > > > > > > > > > > > > > > > > Memory: 143.0M
> > > > > > > > > > > > > > > > > > > > > > > > CGroup:
> > > > > > > > > > > > > > > > > > > > > > > > /system.slice/netdisco-backend.service
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > └─216
> > > > > > > > > > > > > > > > > > > > > > > > netdisco-backend
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > gen 24 09:53:02
> > > > > > > > > > > > > > > > > > > > > > > > deb-netdisco systemd[1]:
> > > > > > > > > > > > > > > > > > > > > > > > Starting Netdisco Backend
> > > > > > > > > > > > > > > > > > > > > > > > Service...
> > > > > > > > > > > > > > > > > > > > > > > > gen 24 09:53:03
> > > > > > > > > > > > > > > > > > > > > > > > deb-netdisco
> > > > > > > > > > > > > > > > > > > > > > > > netdisco-backend[110]: Netdisco
> > > > > > > > > > > > > > > > > > > > > > > > Backend
> > > > > > > > > > > > > > > > > > > > > > > > [Started]
> > > > > > > > > > > > > > > > > > > > > > > > gen 24 09:53:03
> > > > > > > > > > > > > > > > > > > > > > > > deb-netdisco
> > > > > > > > > > > > > > > > > > > > > > > > netdisco-backend[110]: config
> > > > > > > > > > > > > > > > > > > > > > > > watcher: watching
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/environments for
> > > > > > > > > > > > > > > > > > > > > > > > updates.
> > > > > > > > > > > > > > > > > > > > > > > > gen 24 09:53:03
> > > > > > > > > > > > > > > > > > > > > > > > deb-netdisco systemd[1]:
> > > > > > > > > > > > > > > > > > > > > > > > Started Netdisco Backend
> > > > > > > > > > > > > > > > > > > > > > > > Service.
> > > > > > > > > > > > > > > > > > > > > > > > gen 24 10:01:48
> > > > > > > > > > > > > > > > > > > > > > > > deb-netdisco
> > > > > > > > > > > > > > > > > > > > > > > > netdisco-backend[110]: --
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/environments/deployment.yml
> > > > > > > > > > > > > > > > > > > > > > > > updated.
> > > > > > > > > > > > > > > > > > > > > > > > gen 24 10:01:48
> > > > > > > > > > > > > > > > > > > > > > > > deb-netdisco
> > > > > > > > > > > > > > > > > > > > > > > > netdisco-backend[110]: config
> > > > > > > > > > > > > > > > > > > > > > > > watcher: sending TERM to the
> > > > > > > > > > > > > > > > > > > > > > > > server (pid:217)...
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > root@deb-netdisco:~# ps aux
> > > > > > > > > > > > > > > > > > > > > > > > | grep netd
> > > > > > > > > > > > > > > > > > > > > > > > netdisco 216 0.0 0.3
> > > > > > > > > > > > > > > > > > > > > > > > 22840 16008 ? S gen24
> > > > > > > > > > > > > > > > > > > > > > > > 6:19 netdisco-backend
> > > > > > > > > > > > > > > > > > > > > > > > netdisco 281 0.0 0.3
> > > > > > > > > > > > > > > > > > > > > > > > 20744 13680 ? S gen24
> > > > > > > > > > > > > > > > > > > > > > > > 0:00 perl
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/bin/netdisco-web
> > > > > > > > > > > > > > > > > > > > > > > > start
> > > > > > > > > > > > > > > > > > > > > > > > netdisco 282 0.0 0.3
> > > > > > > > > > > > > > > > > > > > > > > > 22152 16696 ? S gen24
> > > > > > > > > > > > > > > > > > > > > > > > 0:47 starman master
> > > > > > > > > > > > > > > > > > > > > > > > --disable-keepalive --user 1001
> > > > > > > > > > > > > > > > > > > > > > > > --group 1001
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/bin/netdisco-web-fg
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > netdisco 372 0.0 0.0
> > > > > > > > > > > > > > > > > > > > > > > > 0 0 ? Z gen24
> > > > > > > > > > > > > > > > > > > > > > > > 0:16 [nd2: master]
> > > > > > > > > > > > > > > > > > > > > > > > netdisco 373 0.0 2.7
> > > > > > > > > > > > > > > > > > > > > > > > 135148 117200 ? S
> > > > > > > > > > > > > > > > > > > > > > > > gen24 0:06 starman worker
> > > > > > > > > > > > > > > > > > > > > > > > --disable-keepalive --user 1001
> > > > > > > > > > > > > > > > > > > > > > > > --group 1001
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/bin/netdisco-web-fg
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > netdisco 374 0.0 2.8
> > > > > > > > > > > > > > > > > > > > > > > > 136000 118000 ? S
> > > > > > > > > > > > > > > > > > > > > > > > gen24 0:06 starman worker
> > > > > > > > > > > > > > > > > > > > > > > > --disable-keepalive --user 1001
> > > > > > > > > > > > > > > > > > > > > > > > --group 1001
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/bin/netdisco-web-fg
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > netdisco 375 0.0 2.7
> > > > > > > > > > > > > > > > > > > > > > > > 133744 115940 ? S
> > > > > > > > > > > > > > > > > > > > > > > > gen24 0:06 starman worker
> > > > > > > > > > > > > > > > > > > > > > > > --disable-keepalive --user 1001
> > > > > > > > > > > > > > > > > > > > > > > > --group 1001
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/bin/netdisco-web-fg
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > netdisco 376 0.0 2.8
> > > > > > > > > > > > > > > > > > > > > > > > 137420 119504 ? S
> > > > > > > > > > > > > > > > > > > > > > > > gen24 0:06 starman worker
> > > > > > > > > > > > > > > > > > > > > > > > --disable-keepalive --user 1001
> > > > > > > > > > > > > > > > > > > > > > > > --group 1001
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/bin/netdisco-web-fg
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > netdisco 377 0.0 2.7
> > > > > > > > > > > > > > > > > > > > > > > > 133792 115996 ? S
> > > > > > > > > > > > > > > > > > > > > > > > gen24 0:05 starman worker
> > > > > > > > > > > > > > > > > > > > > > > > --disable-keepalive --user 1001
> > > > > > > > > > > > > > > > > > > > > > > > --group 1001
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/bin/netdisco-web-fg
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > root 3405 0.0 0.0
> > > > > > > > > > > > > > > > > > > > > > > > 6096 824 pts/0 S+ 10:59
> > > > > > > > > > > > > > > > > > > > > > > > 0:00 grep netd
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > after stop and start
> > > > > > > > > > > > > > > > > > > > > > > > root@deb-netdisco:~#
> > > > > > > > > > > > > > > > > > > > > > > > systemctl start
> > > > > > > > > > > > > > > > > > > > > > > > netdisco-backend.service
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > it seems to work again
> > > > > > > > > > > > > > > > > > > > > > > > [392] 2020-01-24 15:15:18
> > > > > > > > > > > > > > > > > > > > > > > > info mgr (2): job 22423235
> > > > > > > > > > > > > > > > > > > > > > > > booked out for this processing
> > > > > > > > > > > > > > > > > > > > > > > > node
> > > > > > > > > > > > > > > > > > > > > > > > Argument "PID_2700" isn't
> > > > > > > > > > > > > > > > > > > > > > > > numeric in read at
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > > > > line 477, line 31470.
> > > > > > > > > > > > > > > > > > > > > > > > Sereal: Error: Bad Sereal
> > > > > > > > > > > > > > > > > > > > > > > > header: Not a valid Sereal
> > > > > > > > > > > > > > > > > > > > > > > > document. at offset 1 of input
> > > > > > > > > > > > > > > > > > > > > > > > at srl_decoder.c line 580 at
> > > > > > > > > > > > > > > > > > > > > > > > /home/netdisco/perl5/lib/perl5/MCE/Queue.pm
> > > > > > > > > > > > > > > > > > > > > > > > line 480, line 31470.
> > > > > > > > > > > > > > > > > > > > > > > > [3429] 2020-01-27 10:10:08
> > > > > > > > > > > > > > > > > > > > > > > > warn App::Netdisco 2.044004
> > > > > > > > > > > > > > > > > > > > > > > > backend
> > > > > > > > > > > > > > > > > > > > > > > > [3429] 2020-01-27 10:10:08
> > > > > > > > > > > > > > > > > > > > > > > > info resolving backend
> > > > > > > > > > > > > > > > > > > > > > > > hostname...
> > > > > > > > > > > > > > > > > > > > > > > > [3433] 2020-01-27 10:10:08
> > > > > > > > > > > > > > > > > > > > > > > > info applying role Scheduler to
> > > > > > > > > > > > > > > > > > > > > > > > worker 1
> > > > > > > > > > > > > > > > > > > > > > > > [3436] 2020-01-27 10:10:08
> > > > > > > > > > > > > > > > > > > > > > > > info applying role Poller to
> > > > > > > > > > > > > > > > > > > > > > > > worker 4
> > > > > > > > > > > > > > > > > > > > > > > > ...
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > Netdisco mailing list
> > > > > > > > > > > > > > > > > > > > > > > > [email protected]
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > > https://sourceforge.net/p/netdisco/mailman/netdisco-users/
> > > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > > > > > > > > °((( = (( ===°°° (((
> > > > > > > > > > > > > > > > > > > > > > > ================================================
> > > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > > > > > > > °((( = (( ===°°° (((
> > > > > > > > > > > > > > > > > > > > > > ================================================
> > > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > > > > > > °((( = (( ===°°° (((
> > > > > > > > > > > > > > > > > > > > > ================================================
> > > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > > > > > °((( = (( ===°°° (((
> > > > > > > > > > > > > > > > > > > > ================================================
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > _______________________________________________
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > > Netdisco mailing list
> > > > > > > > > > > > > > > > > > > > [email protected]
> > > > > > > > > > > > > > > > > > > > https://sourceforge.net/p/netdisco/mailman/netdisco-users/
> > > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > > > °((( = (( ===°°° (((
> > > > > > > > > > > > > > > > > > ================================================
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > --
> > > > > > > > > > > > > > > > °((( = (( ===°°° (((
> > > > > > > > > > > > > > > > ================================================
> > > > > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > °((( = (( ===°°° (((
> > > > > > > > > > > > ================================================
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > °((( = (( ===°°° (((
> > > > > > > > > > ================================================
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > Netdisco mailing list
> > > > > > [email protected]
> > > > > > https://sourceforge.net/p/netdisco/mailman/netdisco-users/
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Netdisco mailing list
> > > > > [email protected]
> > > > > https://sourceforge.net/p/netdisco/mailman/netdisco-users/
>
>
>
> _______________________________________________
> Netdisco mailing list
> [email protected]
> https://sourceforge.net/p/netdisco/mailman/netdisco-users/
--- End Message ---
