Send netdisco-users mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/netdisco-users
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of netdisco-users digest..."
Today's Topics:
1. Re: ifAlias not handled consistently (Weidner)
2. Re: Netdisco and Aruba Controllers (Oliver Gorwits)
3. Re: Netdisco and Aruba Controllers (Nick Nauwelaerts)
--- Begin Message ---
I want to add to this: We have many Netgear S3300-28/52X-switches. The
behaviour is still as described by TO. If you delete the lines " 4526 =>
'SNMP::Info::Layer2::Netgear'" in "/home/netdisco/perl5/lib/perl5/SNMP/Info.pm"
the port information in Netdisco is correct. But the vendor and model
information fields are not populated correctly. Instead it shows the vendor
number 4526.
Kind regards,
Andre
--- End Message ---
--- Begin Message ---
Sounds like the age-old challenge of picking from ifDescr, ifName and
ifAlias and different platforms using them differently
An update to SNMP::Info might be required
On Tue, 27 Oct 2020 at 12:36, Muris <[email protected]> wrote:
> I did give.
>
> Basically the descriptions on the physical interfaces netdisco is not
> getting that information.
>
> It is just obtaining thr default interface name like ge0/0/0
>
> It clasifies the controllers correctly and captures info about them so
> that part works fine.
>
>
> On 27 Oct 2020, at 20:17, Jon Gerdes <[email protected]> wrote:
>
>
>
> This:
> https://github.com/netdisco/netdisco-mibs/blob/master/aruba/aruba.my
>
> mentions 7220 and 7030, so they are probably supported. You don't give us
> much else to go on.
>
>
>
> On Tue, 2020-10-27 at 12:53 +1030, Muris wrote:
>
> Hi, I have various aruba controllers such as 7220 and 7030, netdisco picks
> them up, however its not grabbing the descriptions of the interfaces and
> putting them in, or connected devices. Interfaces just stay default GE0/0/0,
> GE0/0/1, etc
>
>
>
> Do these work yet or some slight adjustments to SNMP info need to be made?
>
>
>
> Thanks
>
>
> _______________________________________________
> Netdisco mailing list
> [email protected]
> https://sourceforge.net/p/netdisco/mailman/netdisco-users/
>
>
> _______________________________________________
> Netdisco mailing list
> [email protected]
> https://sourceforge.net/p/netdisco/mailman/netdisco-users/
--- End Message ---
--- Begin Message ---
i ran into the same issue with lenovo switches, i think decent way to handle
this can be derived from:
https://github.com/netdisco/snmp-info/blob/543072ca259a21c7f9f3f852b6b6df9f7acbbfb8/lib/SNMP/Info/Layer3/Lenovo.pm#L71-L77
the perldoc part is here:
https://github.com/netdisco/snmp-info/blob/543072ca259a21c7f9f3f852b6b6df9f7acbbfb8/lib/SNMP/Info/Layer3/Lenovo.pm#L293-L299<https://github.com/netdisco/snmp-info/blob/543072ca259a21c7f9f3f852b6b6df9f7acbbfb8/lib/SNMP/Info/Layer3/Lenovo.pm%23L293-L299>
now, the snmp::info aruba module has had quite some extensive work done it
seems when looking at the code:
https://github.com/netdisco/snmp-info/blob/543072ca259a21c7f9f3f852b6b6df9f7acbbfb8/lib/SNMP/Info/Layer3/Aruba.pm#L202-L343
regretfully the aruba module does not mention which os version it was tested
with, but since the last changes were from 2014 perhaps the mib info has
drifted to far to be usefull with newer devices.
// nick
From: Oliver Gorwits [mailto:[email protected]]
Sent: Tuesday, October 27, 2020 17:30
To: Muris <[email protected]>
Cc: [email protected]
Subject: Re: [Netdisco] Netdisco and Aruba Controllers
Sounds like the age-old challenge of picking from ifDescr, ifName and ifAlias
and different platforms using them differently
An update to SNMP::Info might be required
On Tue, 27 Oct 2020 at 12:36, Muris
<[email protected]<mailto:[email protected]>> wrote:
I did give.
Basically the descriptions on the physical interfaces netdisco is not getting
that information.
It is just obtaining thr default interface name like ge0/0/0
It clasifies the controllers correctly and captures info about them so that
part works fine.
On 27 Oct 2020, at 20:17, Jon Gerdes
<[email protected]<mailto:[email protected]>> wrote:
This: https://github.com/netdisco/netdisco-mibs/blob/master/aruba/aruba.my
mentions 7220 and 7030, so they are probably supported. You don't give us much
else to go on.
On Tue, 2020-10-27 at 12:53 +1030, Muris wrote:
Hi, I have various aruba controllers such as 7220 and 7030, netdisco picks them
up, however its not grabbing the descriptions of the interfaces and putting
them in, or connected devices. Interfaces just stay default GE0/0/0, GE0/0/1,
etc
Do these work yet or some slight adjustments to SNMP info need to be made?
Thanks
_______________________________________________
Netdisco mailing list
[email protected]<mailto:[email protected]>
https://sourceforge.net/p/netdisco/mailman/netdisco-users/
_______________________________________________
Netdisco mailing list
[email protected]<mailto:[email protected]>
https://sourceforge.net/p/netdisco/mailman/netdisco-users/
________________________________
Volg Aquafin op Facebook<https://www.facebook.com/AquafinNV> |
Twitter<https://twitter.com/aquafinnv> |
YouTube<http://www.youtube.com/channel/UCk_4P5BJ-MtEEDCkCsR_KqQ?feature=mhee> |
LinkedIN<http://www.linkedin.com/company/aquafin/products> |
Instagram<https://www.instagram.com/aquafin_nv/>
In het kader van de uitoefening van onze taken verzamelen we bij Aquafin
persoonsgegevens. Hoe we omgaan met deze gegevens en wat de rechten van de
betrokkenen zijn, kan je nalezen in onze privacy
policy<https://www.aquafin.be/nl-be/privacy-policy>.
P Denk aan het milieu. Druk deze mail niet onnodig af.
[www.aquafin.be] <https://blauwgroenvlaanderen.be/>
--- End Message ---
_______________________________________________
Netdisco mailing list - Digest Mode
[email protected]
https://lists.sourceforge.net/lists/listinfo/netdisco-users
