2017-05-18 9:41 GMT+02:00 Bjørnar Ness <[email protected]>:
> I have seen this trace couple times before, and also the fact
> that 4.9 had been running fine since the release makes me suspect that igb
> is not to blame. What can I do to provide additional details here?
We have done some adittinal debugging on this issue, where we also tried with a
broadcom gigabit ethernet card, with similar results (not the kernel
crash, but machine
comes to a complete stall due to load/io wait)
When trying to narrow down the problem, I removed the NAT rules, and
in particular
the
chain postrouting {
type nat hook postrouting priority 100
}
And the problem disappears. Commenting in the above block again,
causes the following to happen:
kworker/0:0 starts to use more and more cpu, and in less than a minute
renders the
machine useless. If network cable is unplugged, it takes aroung 30
seconds for the machine to get into a useful state again.
We are seeing around 40-60kpps on the link. This bug is introduced
somewhere between
4.8.6 and 4.9
--
Bj(/)rnar
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
