Dear all,
As discussed with the IEEE, here is a way to progress
draft-wilton-netmod-intf-vlan-yang
Rob, please update your draft with an Informational intended status.
Regards, Benoit
-------- Forwarded Message --------
Subject: RE: Regarding IEEE/IETF coordination draft
draft-wilton-netmod-intf-vlan-yang
Date: Thu, 18 Aug 2016 19:51:14 +0000
From: Glenn Parsons <[email protected]>
To: Benoit Claise <[email protected]>, Romascanu, Dan (Dan)
<[email protected]>, [email protected] <[email protected]>
CC: [email protected] <[email protected]>, Robert Wilton -X
(rwilton - Ensoft Ltd at Cisco) <[email protected]>, Pat Thaler
<[email protected]>, Eric Gray <[email protected]>, John
Messenger <[email protected]>, Paul Nikolich
<[email protected]> ([email protected]) <[email protected]>
Subject: Regarding IEEE/IETF coordination draft
draft-Wilton-netmod-intf-vlan-yang
To: Benoit Claise, Dan Romascanu
Date: July 28, 2016
Dear Benoit, Dan,
Thank you for your email (attached below) regarding IEEE/IETF
coordination draft draft-Wilton-netmod-intf-vlan-yang
In its July 2016 plenary meeting, IEEE 802.1 held detailed discussions
of YANG models for 802.1Q and 802.1X, the related interfaces, interface
stacks, and the service(s) offered to higher layer entities both in end
stations and attached to bridge ports. IEEE 802.1 will continue this
work in its September 2016 interim.
IEEE 802.1 agrees that progression of draft-Wilton-netmod-intf-vlan-yang
as an Informational RFC would be appropriate to meet immediate needs,
and values the details included in the document to ensure that the draft
does not deviate from 802.1 standards. IEEE 802.1 will continue its work
on standard YANG model, appreciates the contribution that other work can
make towards that standards goal, and would welcome participation by
IETF experts in its face-to-face discussions and teleconferences.
Regards,
Glenn.
--
Glenn Parsons - Chair, IEEE 802.1
[email protected] <mailto:[email protected]>
+1-613-963-8141
*From:*Benoit Claise [mailto:[email protected]]
*Sent:* Thursday, July 21, 2016 2:19 PM
*To:* Romascanu, Dan (Dan); John Messenger; [email protected]; Glenn Parsons
*Cc:* [email protected]; Robert Wilton -X (rwilton - Ensoft Ltd at
Cisco); Pat Thaler; Eric Gray
*Subject:* Regarding IEEE/IETF coordination draft
draft-wilton-netmod-intf-vlan-yang
Dear 802.1 WG,
In the IETF, we're considering how to
progressdraft-wilton-netmod-intf-vlan-yang-03
<https://datatracker.ietf.org/doc/draft-wilton-netmod-intf-vlan-yang/> ,
Sub-interface VLAN YANG Data Models, in order to allow IETF forwarding
services to interact with 802.1Q VLAN tagged frames.
One option considered is to publish this draft as Informational RFC (as
opposed to Proposed Standard), with the understanding that IEEE 802.1
could develop an end station interface model that would considered as
the reference standard.
Is this a viable solution from the viewpoint of 802.1Q?
The latest draft version contains YANG "must" statements to try to
constrain the model such that only 802.1 compatible frames result.
Regards, Dan Romascanu (IETF Liaison Manager to IEEE-SA, Benoit Claise
(IETF Operations and Management Area Director)
_______________________________________________
netmod mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/netmod
