On 01/17/2013 08:29 AM, Daniel Borkmann wrote:
On Thu, Jan 17, 2013 at 5:51 AM, Jon Schipp <[email protected]> wrote:
I did a 'make clean' earlier and rebuilt it again on Fedora and it worked.
Back on Ubuntu 12.04-amd64. Yes, the rest of the tools compile fine.
$ make --version
GNU Make 3.81
$ bash --version
GNU bash, version 4.2.24(1)-release (x86_64-pc-linux-gnu)
$ make Q= curvetun
NACL_LIB_DIR/NACL_INC_DIR is undefined, building libnacl with curvetun!
echo "Building nacl:"
Building nacl:
cd curvetun/ && ./build_nacl.sh ~/nacl
Building NaCl for arch amd64 on host ubuntu (grab a coffee, this takes
a while) ...
NaCl lib path /root/nacl/nacl-20110221/build/ubuntu/lib/amd64
NaCl include path /root/nacl/nacl-20110221/build/ubuntu/include/amd64
./nacl_path.sh: 20: ./nacl_path.sh: source: not found
Done!
source ~/.bashrc
/bin/sh: 1: source: not found
make: *** [nacl] Error 127
I did a manual source and it worked after:
$ source ~/.bashrc
This was very helpful! Thanks!
I just did a commit, could you give it a new try in case you have some time?
Alternatively, you should also be able to do:
make nacl && make curvetun
On Tue, Jan 15, 2013 at 5:50 PM, Daniel Borkmann <[email protected]> wrote:
On Tue, Jan 15, 2013 at 3:08 AM, Jon Schipp <[email protected]> wrote:
FYI: I get this on Fedora 17 x86_64
Building NaCl for arch amd64 on host fedora17 (grab a coffee, this
takes a while) ...
NaCl lib path /root/nacl/nacl-20110221/build/fedora17/lib/amd64
NaCl include path /root/nacl/nacl-20110221/build/fedora17/include/amd64
Done!
Building curvetun:
Can you please post me what can be seen via "make Q= curvetun" ... the
rest of the tools, I assume compile fine on your side?
Makefile:227: warning: undefined variable `NACL_INC_DIR'
CC xmalloc.c
gcc: error: curvetun/xmalloc.o: No such file or directory
make: *** [curvetun/xmalloc.o] Error 1
Fedora 17, x86_64, on my laptop:
# make --version
GNU Make 3.82
Built for x86_64-redhat-linux-gnu
# bash --version
GNU bash, version 4.2.39(1)-release (x86_64-redhat-linux-gnu)
# make
Building netsniff-ng toolkit (0.5.8-rc0) for x86_64-redhat-linux:
Building netsniff-ng:
CC hash.c
CC dissector.c
CC dissector_eth.c
CC dissector_80211.c
CC proto_arp.c
CC proto_ethernet.c
CC proto_icmpv4.c
CC proto_icmpv6.c
CC proto_igmp.c
CC proto_ip_authentication_hdr.c
CC proto_ip_esp.c
CC proto_ipv4.c
CC proto_ipv6.c
CC proto_ipv6_dest_opts.c
CC proto_ipv6_fragm.c
CC proto_ipv6_hop_by_hop.c
CC proto_ipv6_in_ipv4.c
CC proto_ipv6_mobility_hdr.c
CC proto_ipv6_no_nxt_hdr.c
CC proto_ipv6_routing.c
CC proto_none.c
CC proto_tcp.c
CC proto_udp.c
CC proto_vlan.c
CC proto_vlan_q_in_q.c
CC proto_mpls_unicast.c
CC proto_80211_mac_hdr.c
CC xio.c
CC xutils.c
CC xmalloc.c
CC bpf.c
CC oui.c
CC pcap.c
CC pcap_rw.c
CC pcap_sg.c
CC pcap_mmap.c
CC mac80211.c
CC ring_rx.c
CC ring_tx.c
CC tprintf.c
CC netsniff-ng.c
LD netsniff-ng
STRIP netsniff-ng
Building trafgen:
LEX trafgen_lexer.l
YAAC trafgen_parser.y
CC xmalloc.c
CC xio.c
CC xutils.c
CC mac80211.c
CC ring_tx.c
CC trafgen/trafgen_lexer.yy.c
CC trafgen/trafgen_parser.tab.c
CC trafgen.c
LD trafgen
STRIP trafgen
Building astraceroute:
CC xmalloc.c
CC xio.c
CC xutils.c
CC proto_none.c
CC tprintf.c
CC aslookup.c
CC bpf.c
CC mtrand.c
CC ring_rx.c
CC astraceroute.c
LD astraceroute
STRIP astraceroute
Building flowtop:
CC xmalloc.c
CC xio.c
CC xutils.c
CC oui.c
CC hash.c
CC dissector_eth.c
CC dissector_80211.c
CC dissector.c
CC proto_none.c
CC tprintf.c
CC flowtop.c
LD flowtop
STRIP flowtop
Building ifpps:
CC xmalloc.c
CC xio.c
CC xutils.c
CC ifpps.c
LD ifpps
STRIP ifpps
Building bpfc:
LEX bpf_lexer.l
LEX bpf_hla_lexer.l
YAAC bpf_parser.y
YAAC bpf_hla_parser.y
CC xmalloc.c
CC xutils.c
CC bpf.c
CC bpf_symtab.c
CC bpfc/bpf_lexer.yy.c
CC bpfc/bpf_parser.tab.c
CC bpfc/bpf_hla_lexer.yy.c
CC bpfc/bpf_hla_parser.tab.c
CC bpfc.c
LD bpfc
STRIP bpfc
Building curvetun:
CC xmalloc.c
CC xio.c
CC xutils.c
CC stun.c
CC mtrand.c
CC patricia.c
CC trie.c
CC hash.c
CC curve.c
CC ct_cpusched.c
CC ct_usermgmt.c
CC ct_servmgmt.c
CC ct_server.c
CC ct_client.c
CC curvetun.c
LD curvetun
STRIP curvetun
On Thu, Jan 10, 2013 at 2:59 AM, Daniel Borkmann <[email protected]> wrote:
This doesn't make any sense to me.
You still get the same error (like ``source'' not found)?
As you know, it's there to re-read the .bashrc file.
Could you provide me some more debugging information?
Like running strace on the nacl_path script and do the curvetun build
with Q= "make Q= curvetun".
Then, I could see what's going on here.
Markus, is your curvetun build working on Ubuntu/Debian?
On Thu, Jan 10, 2013 at 12:39 AM, Jon Schipp <[email protected]> wrote:
My default shell is bash and I've only used the root account.
.bashrc does have the lines:
export NACL_INC_DIR=/root/nacl/nacl-20110221/build/ubuntu/include/amd64
export NACL_LIB_DIR=/root/nacl/nacl-20110221/build/ubuntu/lib/amd64
On Mon, Dec 10, 2012 at 5:30 AM, Daniel Borkmann <[email protected]>
wrote:
hat you built the first time NaCl under root and then
compiled the toolkit as a user?
--
--
--
