Date: Sat, 26 May 2001 09:30:11 -0700 From: John Oram <[EMAIL PROTECTED]> Subject: US Robotics Command Set Constant: Take a look at <http://consumer.3com.com/voice/manual/index.html> This one gives you the US Robotics manuals for the 56K series of modems. They are in three formats "online" - "MS-Word" - "Adobe .PDF" These files are large 1.6 Mb to over 2 MB. Another one to look at is <http://www.citilink.com/~kae/clink_faq/connecting/general/hayes.html> this gives an overview of the standard Hayes command structure. Heimo is correct that you need to use "at" = because it tells the modem that modem commands follow. This must begin each line of commands. I found the 3COM US Robotics web site to be a royal pain in the sitting area. They are focused on the "latest-and-greatest" rather than supporting any of their older "slow speed" telephone modems. Also their web site has all the latest "junk" stuff to make it only usable with the latest web browser. Plus there is no way to by-pass all their "whistles and bells" and go to a straight text mode option... You can look at <http://www.driverforum.com/modem/> which is a Modem/Fax board discussion list. They have updated drivers for your unit and most others too. Best of luck, John Oram ******************************************************** To unsubscribe from this list, send a message to [EMAIL PROTECTED] with the single word Unsubscribe as the subject. You MUST use the same address with which you subscribed! ********************************************************
