Jason J. W. Williams wrote:
Hi Guys,
Didn't have time to write more at length last time. If the K8 is an
nForce 4 chipset you'll have connectivity problems if you're not
auto-negotiate on both sides of the Ethernet cable. That might explain
the problems. We had Sun swap all our X2100s for X2100 M2s because of
the problem.
I can post a full internal write-up from my company on the problem if
that ends up being the issue.
Best Regards,
Jason
Well, hmm...
I've had no trouble w/ a tyan 2865, which is what's in a u20. The K8
is problematic, but that's plugged into a different switch (both are
consumer gigabit devices). I'll try booting the k8 plugged into the
same switch as my 2865 to rule out that problem.
Thanks -
- Bart
--
Bart Smaalders Solaris Kernel Performance
[EMAIL PROTECTED] http://blogs.sun.com/barts
_______________________________________________
networking-discuss mailing list
[email protected]
