Hi,
I build a aggr1 as follows:
# dladm -L
key: 1 (0x0001) policy: L2,L3 address: 0:14:4f:8d:ae:50 (auto)
LACP mode: active LACP timer: short
device activity timeout aggregatable sync coll dist defaulted expired
e1000g0 active short yes yes yes yes no no
e1000g1 active short yes yes yes yes no no
Using 2 X4200 server with the same config and a Linksys Switch with LACP active
enabled.
I generate traffic with netperf "-H X4200-2 -n 4 -f M" from X4200-1 to X4200-2,
but aggr1 can only use or saturate one NIC (e1000g0) with 112 mb/s.
Genarating traffic in both directions, aggr1 is using both NICs with 2x111 mb/s.
What's wrong ? Cannot aggr scale over multiple NICs from one server ?
This message posted from opensolaris.org
_______________________________________________
networking-discuss mailing list
[email protected]
