Vitório writes:
> I have the same problem...
>
> Running the prtconf I know my nic is the pci103c. Then I do grep -iR pci103c
> /boot/solaris/devicedb/master and confirm that my driver is the pcn. So I run
> modload /kernel/drv/pcn.
> When I run the devfsadm -i prb0 was the problem
>
> $devfsadm -i prb0
> devfsadm: driver failed to attach: prb0
>
> And finnaly I don't run ifconfig iprb0 plumb
"pcn" and "iprb" are two different Ethernet drivers. And "prb" isn't
the name of a driver, as far as I know.
> If somebody know what I wrong, please tell.
What hardware do you have and what are you trying to do?
If you have a supported device, then I'd suggest starting with this
(as root):
# ifconfig -a plumb
# ifconfig -a
Report the output of that command. If you have a device that's
supported and installed correctly, it should show up in the output of
that second command.
--
James Carlson, Solaris Networking <[EMAIL PROTECTED]>
Sun Microsystems / 35 Network Drive 71.232W Vox +1 781 442 2084
MS UBUR02-212 / Burlington MA 01803-2757 42.496N Fax +1 781 442 1677
_______________________________________________
networking-discuss mailing list
[email protected]
