Hi all, I tried to look for a bug related to this, but was unable to find anything.
When I execute `dladm show-link` on my x64 snv_104 machine it hangs and I am unable to kill the process: # dladm show-link LINK CLASS MTU STATE OVER e1000g0 phys 1500 down -- ce3 phys 1500 down -- ce0 phys 1500 up -- ce1 phys 1500 down -- ce2 phys 1500 down -- <hang> `dladm show-dev` works fine: # dladm show-dev LINK STATE SPEED DUPLEX e1000g0 down 0Mb half ce0 up 1000Mb full ce1 down 0Mb unknown ce2 down 0Mb unknown ce3 down 0Mb unknown Here is where it seems to got stuck: > ::pgrep dladm | ::walk thread | ::findstack stack pointer for thread ffffff02d13a91e0: ffffff00103ae8f0 [ ffffff00103ae8f0 _resume_from_idle+0xf1() ] ffffff00103aea30 rw_enter+0x2b() ffffff00103aeb90 softmac_hold_device+0x16d() ffffff00103aebd0 stubs_common_code+0x51() ffffff00103aec30 drv_ioc_phys_attr+0x4b() ffffff00103aecc0 drv_ioctl+0x128() ffffff00103aed00 cdev_ioctl+0x45() ffffff00103aed40 spec_ioctl+0x83() ffffff00103aedc0 fop_ioctl+0x7b() ffffff00103aeec0 ioctl+0x18e() The system has a quad cassini card and an Intel gigabit PCI pro GT PWLA8391GT adapter. Have I missed an open bug for this or should I file one? Regards Henrik Johansson http://sparcv9.blogspot.com _______________________________________________ networking-discuss mailing list [email protected]
