today I try to config switch to support LACP,The Switch is blade G8000,LACP config is sample :
http://picasaweb.google.com/sundy26/LACP#5370879656034832850 And First I make two nics been aggregation ,the write and read performance is very good,about 200MB/s but when i take three nics ,and used three client to test it by IOMeter,the performacne result is below 200MB/s (45Mb/s + 53Mb/s + 98MB/s) I change the switch with D-Link DGS 3100-48 ,the result do not changed . who steal my throughput when there nic link aggregation togther ? r...@opensolaris:~# dladm show-aggr -s -i 4 LINK PORT IPACKETS RBYTES OPACKETS OBYTES IPKTDIST OPKTDIST aggr1 -- 544878899 815875682491 326368985 31138379709 -- -- -- e1000g0 275607896 412444934132 121976757 14506177671 50.6 37.4 -- e1000g1 215661013 322132452826 128072404 11058902998 39.6 39.2 -- e1000g4 53609990 81298295533 76319824 5573299040 9.8 23.4 aggr1 -- 604261 906992736 389223 29386850 -- -- -- e1000g0 286155 434189922 186375 14056904 47.4 47.9 -- e1000g1 318104 472802558 0 0 52.6 0.0 -- e1000g4 2 256 202848 15329946 0.0 52.1 aggr1 -- 342271 512261970 220836 16661056 -- -- -- e1000g0 154494 233739386 100593 7583960 45.1 45.6 -- e1000g1 187775 278522328 0 0 54.9 0.0 -- e1000g4 2 256 120243 9077096 0.0 54.4 r...@opensolaris:~# dladm show-aggr -P LINK POLICY ADDRPOLICY LACPACTIVITY LACPTIMER FLAGS aggr1 L3,L4 auto active short ----- r...@opensolaris:~# dladm show-aggr -L LINK PORT AGGREGATABLE SYNC COLL DIST DEFAULTED EXPIRED aggr1 e1000g0 yes yes yes yes no no -- e1000g1 yes yes yes yes no no -- e1000g4 yes yes yes yes no no -- This message posted from opensolaris.org _______________________________________________ networking-discuss mailing list [email protected]
