dk wrote:
Asus Crosshair II Formula is using Marvell 88E8056 PCI-E Gigabit Ethernet
Controller. I have installed snv_128 which should have SUNWyge driver
integrated. During the boot first NIC comes up OK, but second one fails (skge1):
88e8056 should be supported by "yge", not skge.
- Garrett
r...@opensolaris:~# dmesg|grep skge
Nov 29 00:52:21 opensolaris skge: SysKonnect Gigabit Ethernet Adapter families
v8.19.1.3 Tue Nov 14 10:32:06 GMT 2006
Nov 29 00:52:21 opensolaris pcieb: [ID 586369 kern.info] PCIE-device:
pci1043,8...@0, skge0
Nov 29 00:52:21 opensolaris genunix: [ID 936769 kern.info] skge0 is
/p...@0,0/pci10de,7...@14/pci1043,8...@0
Nov 29 00:52:21 opensolaris skge: [ID 801593 kern.notice] skge0: Marvell Yukon
88E8056 Gigabit Ethernet Controller
Nov 29 00:52:21 opensolaris skge: [ID 200860 kern.notice] PreferredPort: A
Nov 29 00:52:21 opensolaris skge: [ID 834597 kern.notice] Dual Net Support: No
Nov 29 00:52:21 opensolaris skge: [ID 389192 kern.notice] RLMT Mode: CLS
Nov 29 00:52:21 opensolaris skge: [ID 573059 kern.notice] Jumbo Frame Support:
Off
Nov 29 00:52:21 opensolaris skge: [ID 772773 kern.notice] Copy Threshold: 1500
Nov 29 00:52:21 opensolaris skge: [ID 477694 kern.notice] VLAN Support: No
Nov 29 00:52:21 opensolaris skge: [ID 571159 kern.notice] Interrupt Moderation:
On
Nov 29 00:52:21 opensolaris skge: [ID 100000 kern.notice]
Nov 29 00:52:22 opensolaris ip: [ID 741211 kern.error] skge1: DL_ATTACH_REQ failed: DL_BADPPA
Nov 29 00:52:22 opensolaris ip: [ID 842151 kern.error] skge1: DL_BIND_REQ
failed: DL_OUTSTATE
Nov 29 00:52:22 opensolaris ip: [ID 631543 kern.error] skge1: DL_PHYS_ADDR_REQ
failed: DL_OUTSTATE
Nov 29 00:52:22 opensolaris ip: [ID 474580 kern.error] skge1: DL_UNBIND_REQ
failed: DL_OUTSTATE
Nov 29 00:52:24 opensolaris skge: [ID 418734 kern.notice] skge0: Network
connection up on port A
Nov 29 00:52:24 opensolaris skge: [ID 249518 kern.notice] Link Speed:
1000 Mbps
Nov 29 00:52:24 opensolaris skge: [ID 966250 kern.notice] Autonegotiation:
Yes
Nov 29 00:52:24 opensolaris skge: [ID 676895 kern.notice] Duplex Mode:
Full
Nov 29 00:52:24 opensolaris skge: [ID 825410 kern.notice] Flow Control:
Symmetric
Nov 29 00:52:24 opensolaris skge: [ID 512437 kern.notice] Role:
Slave
Looks like that /etc/path_to_inst has only 1 instance, shouldn't there be 2
(one for each NIC)?
r...@opensolaris:~# cat /etc/path_to_inst|grep skge
"/p...@0,0/pci10de,7...@14/pci1043,8...@0" 0 "skge"
I tried booting the computer to rediscover the device tree, but still shows
only 1 skge instance in /etc/path_to_inst
My question is how to get 2nd skge NIC to work?
_______________________________________________
networking-discuss mailing list
[email protected]
